Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versandkostenfreie Lieferung ab 299,-€

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

POWER CUSTOM
AR-15/M16 RECEIVER SHIMS

713000108

Eliminates Unwanted Play Between Upper/Lower Receivers & Trigger Components

Tempered stainless steel shims reduce play between receiver halves and hammer/trigger components for a tighter, smoother-functioning rifle. Helps restore accuracy and reduce noise in older rifles. Upper/Lower shims fit on the pivot pin to reduce side-to-side play between the upper and lower receiver.

SPECS: Stainless steel, heat-hardened. Pak of 10.

Mehr...

Beseitigt unerwünschtes Spiel zwischen oberen/unteren Empfängern und Abzugskomponenten

Gehärtete Edelstahlscheiben reduzieren das Spiel zwischen den Empfängerteilen und den Hammer-/Abzugskomponenten für ein festeres, reibungslos funktionierendes Gewehr. Hilft, die Genauigkeit wiederherzustellen und Geräusche bei älteren Gewehren zu reduzieren. Obere/untere Scheiben passen auf den Drehstift, um seitliches Spiel zwischen dem oberen und unteren Empfänger zu verringern.

SPECS: Edelstahl, wärmegehärtet. Packung mit 10.

Mehr...

Kundenbewertungen zu POWER CUSTOM UPPER/LOWER RECEIVER SHIMS

Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 4,7

The best receiver "wobble" fix! (13.02.2014)

These shims are the best fix for receiver wobble. No need to "accu-wedge" or o-ring your upper. This will make it solid and they are discreet. Buy with confidence. Fix the pesky wobble.

slop (21.02.2016)

I bought this product after seeing it in learning section of the website. I am currently a full time police officer/firearms instructor and have wasted thousands of dollars on gimmicks and other bs products that claim to get rid of every problem you have with your rifle. At my department we are all assigned an individual m4 carbine that is ours. We are also allowed to make slight modifications within reason and this is only on the ouside not internally in the gun. Ive been assigned the same m4 for ten years now and have tens of thousands of rounds through it from training, personal training, attending brass maker carbine classes, and annual qualifications. My point, my rifle has some wear and tear on it. It is a bushmaster (old school rifle actually made in the Windham, Maine plant before Freedom group bought them out.) This was a $600 rifle when I bought it. Its not a $2,000 rifle. It has gone the distance and then some and rarely, I mean rarely had a malfunction which has been due to ammo everytime.

So from this wear and tear Ive never had to replace buffer springs, gas tubes, etc. Ive only cleaned it and stayed up on it. However this brings to me to my point. My upper and lower have considerbale play in them. There's some slop. I tried the accuwedge from Brownells which did do a good job of getting rid of the rear slop however I still had front slop. I tried the accuwedge in another rifle build I have which got rid of all the slop. The rifle I built was brand new and didn't have any of the wear and tear on it my duty rifle did. So at first I tried one shim on both take down and pivot pins. Didn't take all of the slop out but most of it. So I then tried two shims on each pin. It was so tight I couldnt lock the upper and lower together. After some quick research I ended up going with an accuwedge in the rear by the buffer and two shims on the pivot pin. Worked like a charm. Rifle feels brand new. It doesn't move like a cerokoted rifle. Again, my rifle doesn't move at all. There is zero slop. This was done all for the cost of the $20. Brownells accuwedge is a great addition to any rifle. Get it along with the shims. You wont be sorry. Also becareful of reviews. Some people aren't intelligent enough to actually be assembling these rifles. i WOULD RECCOMEND THIS TO A FRIEND AND EVERYONE. HERES A HINT BROWNELLS. YOU SHOULD SELL YOUR ACCUWEDGE WITH THE RECIEVER SHIMS AS PART OF A PACK DEAL.

Works (16.01.2017)

As noted by others, the shims in this pack are all the same width and takes patience to install. Otherwise, they work as advertised. I added 2, one to each side of my front pivot pin, and the receiver "wobble" was gone. Also, opening and closing the receiver with the shims installed were not a problem. I would've given this product 5-stars had different shim widths been supplied versus being all the same.

Lesen Sie 3 weitere Bewertungen bei brownells.com

54.9 54.9 1 EUR

Artikel-Nr.: 713000108
POWER CUSTOM UPPER/LOWER RECEIVER SHIMS
Herstellerproduktnummer: NONE Gehärtete Edelstahlscheiben reduzieren das Spiel zwischen den Empfängerteilen und den Hammer-/Abzugskomponenten für ein festeres, reibungslos funktionierendes Gewehr. Hilft, die Genauigkeit wiederherzustellen und Geräusche bei älteren Gewehren zu reduzieren. Obere/untere Scheiben passen auf den Drehstift, um seitliches Spiel zwischen dem oberen und unteren Empfänger zu verringern.

54.9 EUR 16 54,90 € *

Lieferzeit ca. 14-21 Werktage.
Mehr als 10 Stk. im Lager USA

Eigenschaften: Marke: AR-15

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Die gehärteten Edelstahlscheiben reduzieren das Spiel zwischen den Empfängerhälften und den Hammer-/Abzugskomponenten.
Sie helfen, die Genauigkeit wiederherzustellen und Geräusche bei älteren Gewehren zu reduzieren.
Die oberen/unten Scheiben passen auf den Drehstift und minimieren das seitliche Spiel zwischen dem oberen und unteren Empfänger.

Eigenschaften

Marke: AR-15 Versandgewicht: 0,023kg Versandhöhe: 5mm Versandbreite: 104mm Versandlänge: 165mm

Verantwortlicher Wirtschaftsakteur gemäß EU-Verordnung

Brownells Austria GmbH
Hauptstraße 13-15
2332 Hennersdorf
Österreich
info@brownells.at

Reduziere das Spiel deiner AR-15 mit den POWER CUSTOM Receiver Shims! 🔧 10 Edelstahl-Scheiben für präzisere Schüsse und weniger Geräusche.

Eliminates Unwanted Play Between Upper/Lower Receivers & Trigger Components

SPECS: Stainless steel, heat-hardened. Pak of 10.

Mehr...

Beseitigt unerwünschtes Spiel zwischen oberen/unteren Empfängern und Abzugskomponenten

SPECS: Edelstahl, wärmegehärtet. Packung mit 10.

Mehr...

Kundenbewertungen zu POWER CUSTOM UPPER/LOWER RECEIVER SHIMS

Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 4,7

The best receiver "wobble" fix! (13.02.2014)

These shims are the best fix for receiver wobble. No need to "accu-wedge" or o-ring your upper. This will make it solid and they are discreet. Buy with confidence. Fix the pesky wobble.

slop (21.02.2016)