AR-15 barrel nut shim kit allows you to index the barrel nut so you have perfect barrel nut / gas tube as well as top rail alignment, within the recommended barrel nut torque ranges. Shims can be used individually or combined to get the desired thickness. Kit comes with (2) .001", (2) .003", and (1) .007" thick shims. The shim fits between the barrel extension and the barrel nut. Will not affect headspace.
.
Mehr...
Das AR-15 Barrel Nut Shim Kit ermöglicht es dir, die Barrel Nut so auszurichten, dass du eine perfekte Ausrichtung von Barrel Nut / Gasrohr sowie der oberen Schiene erreichst, innerhalb der empfohlenen Drehmomentbereiche für die Barrel Nut. Die Shims können einzeln oder kombiniert verwendet werden, um die gewünschte Dicke zu erreichen. Das Kit enthält (2) .001", (2) .003" und (1) .007" dicke Shims. Das Shim passt zwischen die Barrel Extension und die Barrel Nut. Es hat keinen Einfluss auf den Headspace.
.
Mehr...
Kundenbewertungen zu BROWNELLS AR-15 BARREL NUT SHIM KIT
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 5
FANTASTIC PRODUCT - GET SOME NOW!(21.02.2017)
I will never be without these in my armorers kit again. Installing barrel nuts to optimal torque with proper clocking/indexing for gas tube/op rod clearance has almost always been a compromise, time consuming, and a job I've rarely been 100% pleased with until now. Over/undertorquing affects accuracy and if you're using mil-spec barrel nuts, getting the teeth to line up properly can be a real chore. No more. Now, follow your barrel/barrel nut installation procedure and torque the barrel nut to desired torque. When you're satisfied the threads have taken a set, if the nut isn't aligned (they usually aren't), simply remove the nut, select a shim or combination of shims and slide it/them over the barrel against the barrel shoulder. When you have the proper thickness combination, put final torque on the nut and you're done, proper torque, proper clocking, no guesswork. Just like solid washers to index a muzzle device. No affect on headspace. Cuts this part of the job to a few minutes. Best thing to happen in AR armoring in years - some simple steel shims.
Great value(11.05.2017)
These work perfectly as a barrel shim for an FN-FAL to correct barrel timing and have saved my butt on a few occasions.
Artikel-Nr.: 084000461 BROWNELLS AR-15 BARREL NUT SHIM KIT Herstellerproduktnummer: NONE050806022232 Das AR-15 Barrel Nut Shim Kit ermöglicht es dir, die Barrel Nut so auszurichten, dass du eine perfekte Ausrichtung von Barrel Nut / Gasrohr sowie der oberen Schiene erreichst, innerhalb der empfohlenen Drehmomentbereiche für die Barrel Nut. Die Shims können einzeln oder kombiniert verwendet werden, um die gewünschte Dicke zu erreichen. Das Kit enthält (2) .001", (2) .003" und (1) .007" dicke Shims. Das Shim passt zwischen die Barrel Extension und die Barrel Nut. Es hat keinen Einfluss auf den Headspace.
13.9EUR43913,90 €
*
Lieferzeit ca. 14-21 Werktage. Mehr als 10 Stk. im Lager USA
AR-15 barrel nut shim kit allows you to index the barrel nut so you have perfect barrel nut / gas tube as well as top rail alignment, within the recommended barrel nut torque ranges. Shims can be used individually or combined to get the desired thickness. Kit comes with (2) .001", (2) .003", and (1) .007" thick shims. The shim fits between the barrel extension and the barrel nut. Will not affect headspace.
.
Mehr...
Das AR-15 Barrel Nut Shim Kit ermöglicht es dir, die Barrel Nut so auszurichten, dass du eine perfekte Ausrichtung von Barrel Nut / Gasrohr sowie der oberen Schiene erreichst, innerhalb der empfohlenen Drehmomentbereiche für die Barrel Nut. Die Shims können einzeln oder kombiniert verwendet werden, um die gewünschte Dicke zu erreichen. Das Kit enthält (2) .001", (2) .003" und (1) .007" dicke Shims. Das Shim passt zwischen die Barrel Extension und die Barrel Nut. Es hat keinen Einfluss auf den Headspace.
.
Mehr...
Kundenbewertungen zu BROWNELLS AR-15 BARREL NUT SHIM KIT
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 5
FANTASTIC PRODUCT - GET SOME NOW!(21.02.2017)
I will never be without these in my armorers kit again. Installing barrel nuts to optimal torque with proper clocking/indexing for gas tube/op rod clearance has almost always been a compromise, time consuming, and a job I've rarely been 100% pleased with until now. Over/undertorquing affects accuracy and if you're using mil-spec barrel nuts, getting the teeth to line up properly can be a real chore. No more. Now, follow your barrel/barrel nut installation procedure and torque the barrel nut to desired torque. When you're satisfied the threads have taken a set, if the nut isn't aligned (they usually aren't), simply remove the nut, select a shim or combination of shims and slide it/them over the barrel against the barrel shoulder. When you have the proper thickness combination, put final torque on the nut and you're done, proper torque, proper clocking, no guesswork. Just like solid washers to index a muzzle device. No affect on headspace. Cuts this part of the job to a few minutes. Best thing to happen in AR armoring in years - some simple steel shims.
Great value(11.05.2017)
These work perfectly as a barrel shim for an FN-FAL to correct barrel timing and have saved my butt on a few occasions.