Curved shape drops the pistol deeper into the hand and lowers the line of sight for less felt recoil and a faster pointing gun. Wide beavertail shape prevents the hammer from "bit-ing" the web of the hand. Palmswell"! model fea- tures a raised pad that maintains constant hand contact for the shooter using a high thumb hold.
SPECS: Steel, matte BLUE or satin stainless (S/S). .866" (22mm) from rear of hole to tip. Available Standard or Palmswell. Series 70 or 80. .250" radius requires alteration to frame.
Mehr...
Senkt die Sichtlinie der Pistole in deiner Hand
Die gebogene Form bringt die Pistole tiefer in die Hand und senkt die Sichtlinie für weniger spürbaren Rückstoß und eine schnellere Zielerfassung. Die breite Beavertail-Form verhindert, dass der Hahn das Handgelenk "beißt". Das Modell "Palmswell" verfügt über eine erhöhte Fläche, die den ständigen Kontakt zur Hand des Schützen bei einem hohen Daumenhalt aufrechterhält.
SPECS: Stahl, matt BLAU oder satinierter Edelstahl (S/S). .866" (22mm) vom hinteren Loch bis zur Spitze. Erhältlich in Standard oder Palmswell. Serie 70 oder 80. .250" Radius erfordert eine Anpassung des Rahmens.
Mehr...
Kundenbewertungen zu SMITH & ALEXANDER SERIES 70, PALMSWELL HI-GRIP SAFETY, S/S
Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 4,1
Well made!(07.07.2010)
Good product, nice finish. Just be sure that you understand that it will still need to be fitted internally.
Nice safety(10.01.2011)
This is a well made part that replaced the OEM on a Colt Combat Elite XSE. The arm needed fitting, otherwise, it dropped right it. The palmswell is necessary for me because I shoot with my thumb on top of safety. It disengages positively and is very comfortable.
Great Product.(30.05.2012)
Product is exactly as described, i suggest getting the jig for it as it makes fitting alot quicker. you still need to fit and shape the finger on the saftey to make sure it engages properly. but with the jig you get the bulk of the work out quicker. i like this product and i would recommend to anyone.
Smith & Alexander grip safety(03.03.2017)
I have fitted many safeties on the 1911s. however this seemed to be the hardest one I have had to do. I bought two for two different 1911 I was working on one was a cheap Philipino model the other was a Colt . and I had the same issues with both. I would not recommend this product unless you like to struggle.
Nice Addition(25.10.2010)
Used on a "scratch built" Government Model on an (iffy?) SS Essex frame. Fitted to frame using S&A's installation jig (Brownell's #849-007-000). Took some fitting to "blend" the contours to frame, but I couldn't be happier with the results. Also requires fitting to get correct safety block at end of trigger bow, so be aware of this.
Good-Bye hammer bite.(13.02.2011)
Installed this on a Springfield GI model. Used the S&A jig which worked very well. It was harder to grind the frame than I thought it would be, but I'm not a gunsmith and was using a dremel tool with a carbide bit. It turned out very well though and was well worth the effort; stopping the hamner bite and looking great. Of course you will need to replace the spur hammer too.
beaver tail for my GI(29.05.2011)
By the jig to keep the angles correct, with the jig it took about an hour to reshape the frame, blend it in and reinstall. I am not a gunsmith ,but am a fair hand with tools. The fitting required for this piece was considerably less than expected. This piece is a slightly shortened beavertail which aids in concealed carry.
Nice eddition to my 70 series Gold Cup(23.03.2015)
Nice finish, Left side needed some grinding on safety and frame. Spent several hours getting the sear clearance correct.
Hammer groove was perfect for a commander hammer.
Check out some U-Tube video's if you haven't done this before.
gsg 1911(04.05.2014)
Bought to Install on GSG 1911 .22 to replicate feel of R1 enhanced. Took some blending on grip and channeling for spring but looked and functioned flawlessly.
Nice grip safety(05.12.2015)
This is my 'go to' grip safety for custom work. It allows for a nice high purchase and requires minimal fitting.
Artikel-Nr.: 849007172 SMITH & ALEXANDER SERIES 70, PALMSWELL HI-GRIP SAFETY, S/S Die gebogene Form bringt die Pistole tiefer in die Hand und senkt die Sichtlinie für weniger spürbaren Rückstoß und eine schnellere Zielerfassung. Die breite Beavertail-Form verhindert, dass der Hahn das Handgelenk "beißt". Das Modell "Palmswell" verfügt über eine erhöhte Fläche, die den ständigen Kontakt zur Hand des Schützen bei einem hohen Daumenhalt aufrechterhält.
US-Exportklassifizierung: 0A501.x
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Brownells Austria GmbH
Hauptstraße 13-15
2332 Hennersdorf
Österreich
info@brownells.at
Artikel-Nr.: 849007071 SMITH & ALEXANDER SERIES 70, STANDARD HI-GRIP SAFETY, BLUE Die gebogene Form bringt die Pistole tiefer in die Hand und senkt die Sichtlinie für weniger spürbaren Rückstoß und eine schnellere Zielerfassung. Die breite Beavertail-Form verhindert, dass der Hahn das Handgelenk "beißt". Das Modell "Palmswell" verfügt über eine erhöhte Fläche, die den ständigen Kontakt zur Hand des Schützen bei einem hohen Daumenhalt aufrechterhält.
Artikel-Nr.: 849007072 SMITH & ALEXANDER SERIES 70, PALMSWELL HI-GRIP SAFETY, BLUE Herstellerproduktnummer: GSBLPALMSWELS70 Die gebogene Form bringt die Pistole tiefer in die Hand und senkt die Sichtlinie für weniger spürbaren Rückstoß und eine schnellere Zielerfassung. Die breite Beavertail-Form verhindert, dass der Hahn das Handgelenk "beißt". Das Modell "Palmswell" verfügt über eine erhöhte Fläche, die den ständigen Kontakt zur Hand des Schützen bei einem hohen Daumenhalt aufrechterhält.
Artikel-Nr.: 849007082 SMITH & ALEXANDER SERIES 80, PALMSWELL HI-GRIP SAFETY, BLUE Herstellerproduktnummer: GSBLPALMSWELS80 Die gebogene Form bringt die Pistole tiefer in die Hand und senkt die Sichtlinie für weniger spürbaren Rückstoß und eine schnellere Zielerfassung. Die breite Beavertail-Form verhindert, dass der Hahn das Handgelenk "beißt". Das Modell "Palmswell" verfügt über eine erhöhte Fläche, die den ständigen Kontakt zur Hand des Schützen bei einem hohen Daumenhalt aufrechterhält.
Curved shape drops the pistol deeper into the hand and lowers the line of sight for less felt recoil and a faster pointing gun. Wide beavertail shape prevents the hammer from "bit-ing" the web of the hand. Palmswell"! model fea- tures a raised pad that maintains constant hand contact for the shooter using a high thumb hold.
SPECS: Steel, matte BLUE or satin stainless (S/S). .866" (22mm) from rear of hole to tip. Available Standard or Palmswell. Series 70 or 80. .250" radius requires alteration to frame.
Mehr...
Senkt die Sichtlinie der Pistole in deiner Hand
Die gebogene Form bringt die Pistole tiefer in die Hand und senkt die Sichtlinie für weniger spürbaren Rückstoß und eine schnellere Zielerfassung. Die breite Beavertail-Form verhindert, dass der Hahn das Handgelenk "beißt". Das Modell "Palmswell" verfügt über eine erhöhte Fläche, die den ständigen Kontakt zur Hand des Schützen bei einem hohen Daumenhalt aufrechterhält.
SPECS: Stahl, matt BLAU oder satinierter Edelstahl (S/S). .866" (22mm) vom hinteren Loch bis zur Spitze. Erhältlich in Standard oder Palmswell. Serie 70 oder 80. .250" Radius erfordert eine Anpassung des Rahmens.
Mehr...
Kundenbewertungen zu SMITH & ALEXANDER SERIES 70, PALMSWELL HI-GRIP SAFETY, S/S
Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 4,1
Well made!(07.07.2010)
Good product, nice finish. Just be sure that you understand that it will still need to be fitted internally.
Nice safety(10.01.2011)
This is a well made part that replaced the OEM on a Colt Combat Elite XSE. The arm needed fitting, otherwise, it dropped right it. The palmswell is necessary for me because I shoot with my thumb on top of safety. It disengages positively and is very comfortable.
Great Product.(30.05.2012)
Product is exactly as described, i suggest getting the jig for it as it makes fitting alot quicker. you still need to fit and shape the finger on the saftey to make sure it engages properly. but with the jig you get the bulk of the work out quicker. i like this product and i would recommend to anyone.
Smith & Alexander grip safety(03.03.2017)
I have fitted many safeties on the 1911s. however this seemed to be the hardest one I have had to do. I bought two for two different 1911 I was working on one was a cheap Philipino model the other was a Colt . and I had the same issues with both. I would not recommend this product unless you like to struggle.
Nice Addition(25.10.2010)
Used on a "scratch built" Government Model on an (iffy?) SS Essex frame. Fitted to frame using S&A's installation jig (Brownell's #849-007-000). Took some fitting to "blend" the contours to frame, but I couldn't be happier with the results. Also requires fitting to get correct safety block at end of trigger bow, so be aware of this.
Good-Bye hammer bite.(13.02.2011)
Installed this on a Springfield GI model. Used the S&A jig which worked very well. It was harder to grind the frame than I thought it would be, but I'm not a gunsmith and was using a dremel tool with a carbide bit. It turned out very well though and was well worth the effort; stopping the hamner bite and looking great. Of course you will need to replace the spur hammer too.
beaver tail for my GI(29.05.2011)
By the jig to keep the angles correct, with the jig it took about an hour to reshape the frame, blend it in and reinstall. I am not a gunsmith ,but am a fair hand with tools. The fitting required for this piece was considerably less than expected. This piece is a slightly shortened beavertail which aids in concealed carry.
Nice eddition to my 70 series Gold Cup(23.03.2015)
Nice finish, Left side needed some grinding on safety and frame. Spent several hours getting the sear clearance correct.
Hammer groove was perfect for a commander hammer.
Check out some U-Tube video's if you haven't done this before.
gsg 1911(04.05.2014)
Bought to Install on GSG 1911 .22 to replicate feel of R1 enhanced. Took some blending on grip and channeling for spring but looked and functioned flawlessly.
Nice grip safety(05.12.2015)
This is my 'go to' grip safety for custom work. It allows for a nice high purchase and requires minimal fitting.