Eigenschaften
- Color: Unfinished
- Marke: Winchester
- Material: Wood
- Modell: 94
- Style: Fixed
- Versandgewicht: 0,794kg
- Versandhöhe: 69mm
- Versandbreite: 137mm
- Versandlänge: 457mm
Preise inkl. MwSt., zzgl. Versand
Artikel-Nr.: 984110094
Herstellerproduktnummer: NONE
Klassisches Walnussholz bietet eine enge Übereinstimmung mit den originalen Fabrikschäften. Hochwertiges Holz mit geradem Maserungsmuster. 95 % vorgefräst für eine einfache Anpassung an deine Waffe. Bereit für das finale Schleifen, Beizen und Finish.Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Pre 64 model 94 Winchester stock set 11.12.2015
I purchased one of these sets from another supplier for a much higher price. It was for one of two restorations I am working on. It is not a project for impatient people. It requires a good bit of fitting and attention to detail. That being said, with some patience and thinking before acting, it will come out as good, or better than the factory furniture. I removed the old furniture and started setting the individual pieces in place for test fitting. I used a fine scribe to mark the edges of the metal. After removing the marked wood, I used an orbital sander with 80 grit paper to remove the major portion of the excess on the forearm. I then used the same orbital sander with 100 grit until the lines were barely visible and finally 150 grit until the stock was smooth. I used fine metal files to trim the projections for the receiver recesses. After a number of fittings, the forearm had a better fit and appearance than the original. I did the same procedure for the stock. The only difference was that I placed the buttplate in position and screwed it in prior to marking the stock. I hand sanded the pieces with 220 grit after the last test fit The best advice I can give is be patient, take your time and think before you act. I will be purchasing my second one from Brownells.