Top Takeaways
- Präzises Trimmen der Hülsen
- Einfacher Militärcrimp entfernen
- Robuste Konstruktion für Sicherheit
Eigenschaften
- Case Type: Fired
- Kaliber: 45 (Long) Colt
- Versandgewicht: 0,091kg
- Versandhöhe: 28mm
- Versandbreite: 30mm
- Versandlänge: 53mm
Preise inkl. MwSt., zzgl. Versand
Artikel-Nr.: 749002528
Herst.-Nr.: PH-45C
Die Wilson Case Holders halten die Hülse rechtwinklig zur Schneidfläche, um das Trimmen sowie das Innen-Nacken-Reaming, das Entgraten des Hülsenmunds und das Entfernen von militärischem Crimp zu ermöglichen. Die Standard Pistol Case Holders erfordern, dass die Hülsen fest in den Halter eingeschlagen werden, um die Hülse sicher zu halten, da sie eine gerade Wandkonstruktion haben. Wir empfehlen, wenn verfügbar, die Q-Style Case Holders für Pistolenkartuschen.Used to make Makarov Brass 27.06.2015
I used this Wilson holder to turn 9mm luger into 9mm Makarov. Used a drill to speed things up. Obviously, you size to Makarov after you trim to about 18mm (exact trim to length in your load book).
Works great. Creates a mess of course. I had to create a system where I would hammer out the piece of brass by using a brass punch. One quick tap to the holder would knock it out. It's not like the rifle brass which can be knocked out quickly. Wilson warns of this in the instructions with this holder.
Works when it is used correctly 30.04.2015
I have accurately cut many cases using this without using a press. As long as the back of the cartridge extends out of the holder to where the micro-meters foot can make contact with it and the cutting bit can make contact with the case edge you are golden. This will make a consistent cut time after time as it is a set distance based on the cartridge. if the cartridge does not extend out the back of the holder your micro-meter foot will contact the holder and will cut the case too short. My only gripe is that the holder has a tenancy to spin in the trimmer when the cutter is pressed harder to cut faster.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.