Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versandkostenfreie Lieferung ab 299,-€

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

LIGHTNING STRIKE
TITANIUM SAFETY PLUNGER for GLOCK®

642102021

Helps You Get A Smoother, Lighter Trigger Pull

Extremely lightweight titanium safety plunger reduces mass for a lighter felt trigger pull. Titanium nitride coating reduces friction. One of those small detail that helps complete a Glock® trigger job. Includes Wolff safety plunger spring.

SPECS: Solid titanium, titanium nitride coated. Small - Fits Glock Models 17, 18, 19, 20, 22, 23, 24, 26, 27, 29, 31, 32, 33, 34 & 35; Large - Fits Glock Models 21, 30, 36, 37, 38 & 39.

Mehr...

Hilft Dir, einen sanfteren, leichteren Abzugswiderstand zu bekommen

Der extrem leichte Titan-Sicherheitsplunger reduziert die Masse für einen leichteren Abzugswiderstand. Die Titan-Nitrid-Beschichtung verringert die Reibung. Ein kleines Detail, das hilft, einen Glock®-Abzug zu optimieren. Inklusive Wolff Sicherheitsplungerfeder.

SPECS: Solides Titan, titanbeschichtet. Klein - Passt für Glock Modelle 17, 18, 19, 20, 22, 23, 24, 26, 27, 29, 31, 32, 33, 34 & 35; Groß - Passt für Glock Modelle 21, 30, 36, 37, 38 & 39.

Mehr...

Kundenbewertungen zu Small Safety Plunger für Glock bis Gen4

Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 4,4

G 22 (30.10.2010)

wonderful product. Use it with the 3.5 ghost connector and the trigger feels alot smoother. The oringal trigger weight is just fine but had to much creep and the break was not clean. With these two products the creep has almost been eliminated and is a smooth draw and a clean break. Would put these in any Glock.

Improving perfection (20.01.2011)

I install this safety plunger as part of a personal trigger job on all my glocks. They work find and I have not had any problems with them.

Glock Titanium safety plunger (12.01.2012)

If you have a glock, you need this!!! It makes the trigger feel more that of one on a double action pistol. I can now feel a sooth pre-travel, followed by a crisp action.

Glock Safety Plunger (11.05.2014)

I think the plunger offers an upgrade in the performance of the pistol when combined with a new connector. The edges of the plunger are much smoother and stronger so you should experience a long service life. It certainly makes the feel of the trigger more crisp. It is a drop in item so no fitting or polishing is required.

Longevity issues (01.04.2015)

I wish it lasted a little longer. I wore this sucker out with just over 3,000 rounds down the pipe. When I first installed the Ti plunger its operation was smooth and silky, but with over 3,000 rounds through my Gen4 G22 with the Ti Safety Plunger installed, it was beginning to feel gritty and showing signs of wear, most notable is scoring of the cylinder edge that contacts the extractor. I like this product, but I had to pull it out of my weapon when I found metal shavings inside the plunger hole, striker pin channel and on the extractor. I run my weapon pretty hard and never experienced a malfunction or FTE, but I cannot continue to use this plunger in it's current condition.

Hmmm.... I wonder if Brownells will replace it? Maybe I should give the sales team a call.

Not suitable for self defense .. (12.04.2018)

The lower cylinder started to scar and leave metal chips in my plunger hole after 100 rounds. Glock 17. Not suitable for a self defense or high use range gun. It simply is not reliable. Someone needs to hire a metallurgist and rework this entire thing. Helped smooth out trigger quite a bit when new. Used with six pound spring, and 3.5 lb trigger connector. Like tossing 20 dollars down the toilet. Went back to just polishing the glock saftey plunger.

model 30 (23.02.2010)

fit perfect in the gun. much better than the factory plunger. trigger pull is much smoother. looks good also

Trigger Job (20.01.2011)

I use this product as part of a trigger job for all my Glocks. Easy installation, have had no problems, and is economical.

Good addition to a reduced pull trigger. (31.07.2011)

I have fired 200+ rounds downrange on trigger job, which includes the L.S. titanium plunger. It ads to a smooth, more consistent, lightened trigger. It also complements the L.S. titanium striker.
T.P.D.A.

Fantastic Product (02.10.2012)

I installed this safety plunger (and supplied spring) along with a 969-161-610 Reduced Power Striker Spring in my carry G19. Previously I had installed a 3.5 pound connector and NY1 spring to create a steady pressure trigger similar to a double action revolver. These two parts changed the trigger pull into a very smooth action and the pull weight dropped from just under 8 pounds to 6.5 pounds. It is hard to imagine the difference without actually experiencing it.

Lesen Sie 10 weitere Bewertungen bei brownells.com

29.9 49.9 2 EUR

Artikel-Nr.: 642102021
Small Safety Plunger für Glock bis Gen4
Herstellerproduktnummer: LS7924 Der extrem leichte Titan-Sicherheitsplunger reduziert die Masse für einen leichteren Abzugswiderstand. Die Titan-Nitrid-Beschichtung verringert die Reibung. Ein kleines Detail, das hilft, einen Glock®-Abzug zu optimieren. Inklusive Wolff Sicherheitsplungerfeder.

29.9 EUR 0 29,90 € *

Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.

Eigenschaften: Marke: Glock Modell: 29, 20, 17, 19, 22, 23, 24, 34, 35, 26, 27, 31, 32, 33, 18

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Der Titan-Sicherheitsplunger reduziert die Masse für einen leichteren Abzug.
Die Titan-Nitrid-Beschichtung verringert die Reibung und verbessert die Leistung.
Passt für viele Glock Modelle, einschließlich 17, 19, 20, 22 und mehr.

Eigenschaften

Marke: Glock Modell: 29,20,17,19,22,23,24,34,35,26,27,31,32,33,18 Versandgewicht: 0,005kg Versandbreite: 83mm Versandlänge: 146mm

Artikeldetails

US-Exportklassifizierung: 0A501.x

Artikel-Nr.: 642102017
LIGHTNING STRIKE LARGE SAFETY PLUNGER
Herstellerproduktnummer: LS2024 Der extrem leichte Titan-Sicherheitsplunger reduziert die Masse für einen leichteren Abzugswiderstand. Die Titan-Nitrid-Beschichtung verringert die Reibung. Ein kleines Detail, das hilft, einen Glock®-Abzug zu optimieren. Inklusive Wolff Sicherheitsplungerfeder.

49.9 EUR 0 49,90 € *

Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.

Eigenschaften: Marke: Glock Modell: 21, 30, 36, 37, 39, 38

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Der Titan-Sicherheitsplunger sorgt für einen leichteren Abzug und reduziert die Masse.
Die Titan-Nitrid-Beschichtung verringert die Reibung und verbessert die Leistung.
Passt für eine Vielzahl von Glock-Modellen, einschließlich der großen Modelle 21, 30, 36, 37, 38 und 39.

Eigenschaften

Marke: Glock Modell: 21,30,36,37,38,39 Versandgewicht: 0,009kg Versandhöhe: 8mm Versandbreite: 79mm Versandlänge: 173mm

Artikeldetails

US-Exportklassifizierung: 0A501.x

Optimiere deinen Glock®-Abzug mit dem leichten TITANIUM SAFETY PLUNGER. 🚀 Reduziere Reibung und verbessere den Abzugswiderstand!

Helps You Get A Smoother, Lighter Trigger Pull

SPECS: Solid titanium, titanium nitride coated. Small - Fits Glock Models 17, 18, 19, 20, 22, 23, 24, 26, 27, 29, 31, 32, 33, 34 & 35; Large - Fits Glock Models 21, 30, 36, 37, 38 & 39.

Mehr...

Hilft Dir, einen sanfteren, leichteren Abzugswiderstand zu bekommen

Mehr...

Kundenbewertungen zu Small Safety Plunger für Glock bis Gen4

Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 4,4

G 22 (30.10.2010)

Improving perfection (20.01.2011)

I install this safety plunger as part of a personal trigger job on all my glocks. They work find and I have not had any problems with them.

Glock Titanium safety plunger (12.01.2012)

If you have a glock, you need this!!! It makes the trigger feel more that of one on a double action pistol. I can now feel a sooth pre-travel, followed by a crisp action.

Glock Safety Plunger (11.05.2014)