Sinclair Bullet Drop Rods are designed to remove bullets that are lightly stuck in the throat/rifling. The drop rods are dropped down the barrel from the muzzle end with the rifle standing upright. Sinclair Bullet Drop Rods are not designed to dislodge or knock out loaded (live) rounds. These are great to keep in your range box to use when a cleaning rod is not available. The Bullet Drop Rods can also be used to remove bullets used to determine seating depth with a Hornady or Sinclair Seating Depth Tool. Sinclair Drop Rods are brass and they will not harm stainless or chrome moly barrels. Each set includes two rods - a three sixteenths of an inch diameter rod for 20 caliber through 25 caliber bores, and one fourth inch diameter rod for 6.5 through 416 caliber bores.
Die Sinclair Bullet Drop Rods sind dafür konzipiert, Kugeln zu entfernen, die leicht im Hals oder im Züge feststecken. Die Drop Rods werden von der Mündung aus in den Lauf eingeführt, während das Gewehr aufrecht steht. Die Sinclair Bullet Drop Rods sind nicht dafür gedacht, geladene (lebende) Patronen zu lösen oder herauszuschlagen. Diese sind großartig, um sie in deiner Schießstandtasche zu haben, wenn kein Reinigungsrohr verfügbar ist. Die Bullet Drop Rods können auch verwendet werden, um Kugeln zu entfernen, die zur Bestimmung der Sitztiefe mit einem Hornady oder Sinclair Seating Depth Tool verwendet wurden. Die Sinclair Drop Rods bestehen aus Messing und schädigen weder Edelstahl- noch Chrom-Moly-Läufe. Jedes Set enthält zwei Stäbe - einen mit einem Durchmesser von drei sechzehntel Zoll für Läufe von .20 bis .25 Kaliber und einen mit einem Durchmesser von einem Viertel Zoll für Läufe von 6,5 bis 416 Kaliber.