Replacement front sights have a high-visibility white outline surrounding a Tritium insert for easy sight acquisition in all types of ambient light—from bright sunlight to nighttime, and anything in between. Low, streamlined, no-snag shape makes these sights excellent for concealed carry guns. Model available for Ruger® LCR®.
Ersatz-Frontvisiere haben einen hochsichtbaren weißen Rand, der ein Tritium-Einsatz umgibt, um eine einfache Zielerfassung bei allen Lichtverhältnissen zu ermöglichen – von hellem Sonnenlicht bis zur Nacht und allem dazwischen. Die niedrige, stromlinienförmige, schnittfreie Form macht diese Visiere hervorragend für verdeckte Tragwaffen. Modell verfügbar für Ruger® LCR®.
TECHNISCHE DATEN: Aus maschinellem Stahl, matt schwarze Oberfläche. LCR - .110" (2.8mm) Durchmesser Punkt. Gunsmith Installation empfohlen.
Mehr...
Kundenbewertungen zu XS SIGHT SYSTEMS STANDARD DOT TRITIUM SIGHTS RUGER LCR (38/357 ONLY) GREEN
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4,6
JUST WHAT YOUR CARRY WEAPON WANTS(30.12.2011)
EXCELLENT SIGHTS,CAN BE INSTALLED WITH THE RIGHT TOOLS AND SOME PATIENCE.VERY GOOD DIRECTIONS ON INSTALL.LOW LIGHT OR NO LIGHT VISIBILITY. JUST WHAT ANY CARRY OR PERSONEL PROTECTION WEAPON SHOULD HAVE. A+++++++++++
Excellent Replacement Sight for LCR(08.04.2012)
I purchased a LCR for my wife as a CCW, and I was not really satisfied with the stock sight. It was decent enough, but I think for CCW low light performance is a must. So after some reading I decided on this one.
The package comes with: 1) The Sight, 2) a new roll pin, 3) a punch, and 4) a small tube of blue loctite.
Installation took a total of 20 minutes, and I am far from a "handy man". I won't go into the details of the installation, because the supplied instructions are very detailed (including pictures). I would give 2 pieces of advice for those of you that aren't gunsmiths and don't have all the fancy tools.
1) Get a roll of masking tape to hold the gun in place while you punch out / replace the roll pin. The cylinder sits perfectly inside the roll, it holds steady, and won't hurt the guns finish at all.
2) Get a real, GOOD punch. The one supplied works well enough for removing the stock roll pin, but was a terrible pain to replace the new pin. I knocked the old pin out with 2 hits, but the pin was bent in the process (yes after 2 hits). I was able to get the new pin started with the bent pin, but could not finish driving it. I got a larger sized punch to cover the whole head of the pin; 1 smack and the sight was ready to roll.
Lastly, this sight is not lined up like a standard revolver sight. Originally, you put the tip of the post under what you wanted to hit. With this, you put the center of the "dot" on top of your target. This is excellent for CCW and man sized targets. However, if you are using this a range queen, hitting steel plates at a distance takes some getting used to.
*Note* - I will assume all guns are different, but this is my experience with the sight. XS says to lay the white of the dot down inside the rear sight notches. This was not the true (in my case). I actually have to put the white of the dot on the top of the rear sight notches. Just something to consider if you buy it and can't seem to hit anything (I know I couldn't! haha).
All in all, I am very pleased with this sight, and yes I would purchase it again.
Then there was Light!!!!!!!(16.08.2012)
Easy to install, took me about 20 minutes. (Zero gunsmithing abilities at all)
Comes with a punch but it eventually broke (can't complain too much about that because most items you buy don't come with tools!)
Looks great, sight picture is much better (have not fired yet)
Glows nicely in pitch black room.
I tried to use roll pin from LCR I took out but it ended up mushrooming so I used the supplied one and it fit and works fine.
Highly recommend this to any LCR owners!
Nothing like quick service(01.04.2013)
I ordered this last Friday after lunch and it arrived today.(Monday)
I installed it this evening. No problems. I read where the punch is getting bent. I always use a lot of light taps to remove this type of pin. After removing the old pin, the supplied punch looks like it came out of the package.
I do recommend that you start the pin in the sight just enough to hold it but not enough to keep it from seating on the top of the LCR. This makes it easier to finish the install. I also recommend that you use a hammer with an alluminum head as this will not damage the pin or your LCR.
When I installed the pin, I used the fat end of the supplied punch to seat it, again using several taps that are not hard enough to bend the punch.
I hope that this helps others to avoid problems that others had.
Artikel-Nr.: 430109173 XS SIGHT SYSTEMS STANDARD DOT TRITIUM SIGHTS RUGER LCR (38/357 ONLY) GREEN Herstellerproduktnummer: RP-0013N-4G647533023337 Ersatz-Frontvisiere haben einen hochsichtbaren weißen Rand, der ein Tritium-Einsatz umgibt, um eine einfache Zielerfassung bei allen Lichtverhältnissen zu ermöglichen – von hellem Sonnenlicht bis zur Nacht und allem dazwischen. Die niedrige, stromlinienförmige, schnittfreie Form macht diese Visiere hervorragend für verdeckte Tragwaffen. Modell verfügbar für Ruger® LCR®.
114.9EUR2114,90 €
*
Lieferzeit ca. 14-21 Werktage. 2 Stk. im Lager USA
Die Ersatz-Frontvisiere bieten eine hohe Sichtbarkeit durch den weißen Rand und das Tritium-Element für bessere Zielerfassung bei allen Lichtverhältnissen.
Die Visiere sind ideal für verdeckte Tragwaffen dank des stromlinienförmigen, schnittfreien Designs.
Empfohlene Installation durch einen Büchsenmacher für optimale Leistung und Sicherheit.
Eigenschaften
Color:
Green
Marke:
Ruger
Modell:
LCR
Outline:
Green
Style:
Fixed
Versandgewicht: 0,068kgVersandhöhe: 32mmVersandbreite: 127mmVersandlänge: 203mm
UPC
: 647533023337
Brownells Austria GmbH
Hauptstraße 13-15
2332 Hennersdorf
Österreich
info@brownells.at
Artikel-Nr.: 006000171 XS SIGHT SYSTEMS STANDARD DOT TRITIUM SIGHTS-RUGER LCR .38/.357 ONLY Herstellerproduktnummer: RP-0008N-4647533038317 Ersatz-Frontvisiere haben einen hochsichtbaren weißen Rand, der ein Tritium-Einsatz umgibt, um eine einfache Zielerfassung bei allen Lichtverhältnissen zu ermöglichen – von hellem Sonnenlicht bis zur Nacht und allem dazwischen. Die niedrige, stromlinienförmige, schnittfreie Form macht diese Visiere hervorragend für verdeckte Tragwaffen. Modell verfügbar für Ruger® LCR®.
119.9EUR4119,90 €
*
Lieferzeit ca. 14-21 Werktage. 4 Stk. im Lager USA
Eigenschaften:Marke: RugerModell: LCRStyle: Dot, Low-Profile, Night Sight
Replacement front sights have a high-visibility white outline surrounding a Tritium insert for easy sight acquisition in all types of ambient light—from bright sunlight to nighttime, and anything in between. Low, streamlined, no-snag shape makes these sights excellent for concealed carry guns. Model available for Ruger® LCR®.
Ersatz-Frontvisiere haben einen hochsichtbaren weißen Rand, der ein Tritium-Einsatz umgibt, um eine einfache Zielerfassung bei allen Lichtverhältnissen zu ermöglichen – von hellem Sonnenlicht bis zur Nacht und allem dazwischen. Die niedrige, stromlinienförmige, schnittfreie Form macht diese Visiere hervorragend für verdeckte Tragwaffen. Modell verfügbar für Ruger® LCR®.
TECHNISCHE DATEN: Aus maschinellem Stahl, matt schwarze Oberfläche. LCR - .110" (2.8mm) Durchmesser Punkt. Gunsmith Installation empfohlen.
Mehr...
Kundenbewertungen zu XS SIGHT SYSTEMS STANDARD DOT TRITIUM SIGHTS RUGER LCR (38/357 ONLY) GREEN
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4,6
JUST WHAT YOUR CARRY WEAPON WANTS(30.12.2011)
EXCELLENT SIGHTS,CAN BE INSTALLED WITH THE RIGHT TOOLS AND SOME PATIENCE.VERY GOOD DIRECTIONS ON INSTALL.LOW LIGHT OR NO LIGHT VISIBILITY. JUST WHAT ANY CARRY OR PERSONEL PROTECTION WEAPON SHOULD HAVE. A+++++++++++
Excellent Replacement Sight for LCR(08.04.2012)
I purchased a LCR for my wife as a CCW, and I was not really satisfied with the stock sight. It was decent enough, but I think for CCW low light performance is a must. So after some reading I decided on this one.
The package comes with: 1) The Sight, 2) a new roll pin, 3) a punch, and 4) a small tube of blue loctite.
Installation took a total of 20 minutes, and I am far from a "handy man". I won't go into the details of the installation, because the supplied instructions are very detailed (including pictures). I would give 2 pieces of advice for those of you that aren't gunsmiths and don't have all the fancy tools.
1) Get a roll of masking tape to hold the gun in place while you punch out / replace the roll pin. The cylinder sits perfectly inside the roll, it holds steady, and won't hurt the guns finish at all.
2) Get a real, GOOD punch. The one supplied works well enough for removing the stock roll pin, but was a terrible pain to replace the new pin. I knocked the old pin out with 2 hits, but the pin was bent in the process (yes after 2 hits). I was able to get the new pin started with the bent pin, but could not finish driving it. I got a larger sized punch to cover the whole head of the pin; 1 smack and the sight was ready to roll.
Lastly, this sight is not lined up like a standard revolver sight. Originally, you put the tip of the post under what you wanted to hit. With this, you put the center of the "dot" on top of your target. This is excellent for CCW and man sized targets. However, if you are using this a range queen, hitting steel plates at a distance takes some getting used to.
*Note* - I will assume all guns are different, but this is my experience with the sight. XS says to lay the white of the dot down inside the rear sight notches. This was not the true (in my case). I actually have to put the white of the dot on the top of the rear sight notches. Just something to consider if you buy it and can't seem to hit anything (I know I couldn't! haha).
All in all, I am very pleased with this sight, and yes I would purchase it again.
Then there was Light!!!!!!!(16.08.2012)
Easy to install, took me about 20 minutes. (Zero gunsmithing abilities at all)
Comes with a punch but it eventually broke (can't complain too much about that because most items you buy don't come with tools!)
Looks great, sight picture is much better (have not fired yet)
Glows nicely in pitch black room.
I tried to use roll pin from LCR I took out but it ended up mushrooming so I used the supplied one and it fit and works fine.
Highly recommend this to any LCR owners!
Nothing like quick service(01.04.2013)
I ordered this last Friday after lunch and it arrived today.(Monday)
I installed it this evening. No problems. I read where the punch is getting bent. I always use a lot of light taps to remove this type of pin. After removing the old pin, the supplied punch looks like it came out of the package.
I do recommend that you start the pin in the sight just enough to hold it but not enough to keep it from seating on the top of the LCR. This makes it easier to finish the install. I also recommend that you use a hammer with an alluminum head as this will not damage the pin or your LCR.
When I installed the pin, I used the fat end of the supplied punch to seat it, again using several taps that are not hard enough to bend the punch.
I hope that this helps others to avoid problems that others had.