Remove burrs from your cases efficiently with the Sinclair Deburring Tool Holder and your case mouth deburring tool. Use in a drill or power screwdriver to quickly debur your case mouths. The stainless steel holder will work with L.E. Wilson deburring tools, current Forster deburring tools. The Sinclair Deburring Tool Holder and the L.E. Wilson Case Mouth Deburring Tool are available together in a package that saves you 15 percent versus purchasing them seperately (05-150).
Mehr...
Entferne Grate von deinen Hülsen effizient mit dem Sinclair Entgrater-Halter und deinem Hülsenmund-Entgrater. Verwende ihn in einem Bohrer oder Akkuschrauber, um die Hülsenöffnungen schnell zu entgraten. Der Halter aus rostfreiem Stahl funktioniert mit L.E. Wilson Entgratern und aktuellen Forster Entgratern. Der Sinclair Entgrater-Halter und der L.E. Wilson Hülsenmund-Entgrater sind zusammen in einem Paket erhältlich, das dir 15 Prozent im Vergleich zum Einzelkauf (05-150) spart.
Mehr...
Kundenbewertungen zu SINCLAIR INTERNATIONAL L.E. WILSON DEBURRING TOOL WITH HOLDER
Anzahl der Bewertungen: 8
Von brownells.com: 8
Durchschnittliche Bewertung: 4
Works great with Sinclair power center(19.02.2013)
Nice tool. Chucking it up in the Sinclair power center made for the nicest deburring session I've ever had. Darn near effortless.
Do need to keep an eye on how long you hold the case in there with it under power.
Wrong dimensions(05.05.2015)
Holder will only accept chamfer end of L.E. Wilson tool which measures .621. The deburring end of the Wilson tool measures
.6235 and will not enter the holder.
Excellent tool(11.03.2016)
This is great combo. The Wilson deburr tool is very nicely made and sharp. The holder is also really nicely made, with unusually good attention to detail.
Thanks, Sinclair, for offering a unique product.
needed some fitting(19.12.2011)
The description says that the RCBS tool will fit, but my RCBS case mouth chamfer/deburr tool didn't quite fit in this adapter. I chucked the RCBS tool in my drill by the pin on the outside deburring end and spun it while using sandpaper on the tool. This got me pretty close, but it was still a little too tight and required pliers to switch tool ends. I ended up using a fine grit sanding drum on my rotary tool inside the Sinclair adapter to smooth the inside out just a little bit and now it's easy to remove the RCBS tool to switch ends, but still has a snug fit. If it had've fit this good out of the box, it would've gotten 5 stars, but the fitting was a bit annoying. I'd probably still buy again.
AN UNBIASED TOOL REVIEW(07.01.2014)
SUPER NICE & WELL MADE TOOL TO HOLD YOUR DEBURRING TOOL FOR SPINNING WITH A DRILL. HOWEVER, IT WILL NOT EASILY FIT THE "RCBS" DEBURRING TOOL. THE "ID" OF THE HOLDER WILL HAVE TO BE ENLARGED OR THE "OD" OF THE DEBURRING TOOL REDUCED A FEW THOUSANDTHS TO ACHIEVE A PROPER FIT. ANOTHER OPTION WOULD BE TO SIMPLY ORDER A "WILSON" DEBURRING TOOL IF YOU DO NOT ALREADY OWN ONE.
Perfect!!(19.08.2015)
Not sure why some people give it 2 stars when they're trying to use the wrong deburring tool inside... It's made for the Wilson deburring tool, and fits 100% perfectly, and works GREAT!!!
One of the best tools I've ever bought(03.12.2016)
Deburring and chamfering were my least favorite operations of case prep. Now they're a breeze. Just make sure you follow the recommendation an use a Wilson chamfering tool, which I already had. I used to get the worst hand cramps when I would twist the chamfering tool by hand. This holder eliminates that and is much faster to boot! I have mine inserted into my B&D cordless screwdriver, but a drill works too. I just wish I had purchased one of these years ago.
Just what I was looking for!(14.07.2018)
I purchased this item to use with my L.E. Wilson inside/outside 45 degree chamfer tool. It works like it was made for it, which of course it was! There are chamfer tools with a round shaft that will work in a drill press, but the gun sites don't seem to carry them any more. This adapter allows you to do that with the combo tool.
I use it to chamfer the throat of the chamber on black powder reproduction/replica guns cylinders. Makes for easy starting the round balls, and less lead shaving. Brownells also sells a 45 degree brass lapping tool that does have the drill press stem. Use this with their lapping compound to get a smooth finish. See picture.
Artikel-Nr.: 749004354 SINCLAIR INTERNATIONAL L.E. WILSON DEBURRING TOOL WITH HOLDER Herstellerproduktnummer: 05150 Entferne Grate von deinen Hülsen effizient mit dem Sinclair Entgrater-Halter und deinem Hülsenmund-Entgrater. Verwende ihn in einem Bohrer oder Akkuschrauber, um die Hülsenöffnungen schnell zu entgraten. Der Halter aus rostfreiem Stahl funktioniert mit L.E. Wilson Entgratern und aktuellen Forster Entgratern. Der Sinclair Entgrater-Halter und der L.E. Wilson Hülsenmund-Entgrater sind zusammen in einem Paket erhältlich, das dir 15 Prozent im Vergleich zum Einzelkauf (05-150) spart.
69.9EUR369,90 €
*
Lieferzeit ca. 14-21 Werktage. 3 Stk. im Lager USA
Artikel-Nr.: 749002628 SINCLAIR INTERNATIONAL SINCLAIR CASE MOUTH DEBURRING TOOL HOLDER Herstellerproduktnummer: 05110 Entferne Grate von deinen Hülsen effizient mit dem Sinclair Entgrater-Halter und deinem Hülsenmund-Entgrater. Verwende ihn in einem Bohrer oder Akkuschrauber, um die Hülsenöffnungen schnell zu entgraten. Der Halter aus rostfreiem Stahl funktioniert mit L.E. Wilson Entgratern und aktuellen Forster Entgratern. Der Sinclair Entgrater-Halter und der L.E. Wilson Hülsenmund-Entgrater sind zusammen in einem Paket erhältlich, das dir 15 Prozent im Vergleich zum Einzelkauf (05-150) spart.
26.9EUR326,90 €
*
Lieferzeit ca. 14-21 Werktage. 3 Stk. im Lager USA
Remove burrs from your cases efficiently with the Sinclair Deburring Tool Holder and your case mouth deburring tool. Use in a drill or power screwdriver to quickly debur your case mouths. The stainless steel holder will work with L.E. Wilson deburring tools, current Forster deburring tools. The Sinclair Deburring Tool Holder and the L.E. Wilson Case Mouth Deburring Tool are available together in a package that saves you 15 percent versus purchasing them seperately (05-150).
Mehr...
Entferne Grate von deinen Hülsen effizient mit dem Sinclair Entgrater-Halter und deinem Hülsenmund-Entgrater. Verwende ihn in einem Bohrer oder Akkuschrauber, um die Hülsenöffnungen schnell zu entgraten. Der Halter aus rostfreiem Stahl funktioniert mit L.E. Wilson Entgratern und aktuellen Forster Entgratern. Der Sinclair Entgrater-Halter und der L.E. Wilson Hülsenmund-Entgrater sind zusammen in einem Paket erhältlich, das dir 15 Prozent im Vergleich zum Einzelkauf (05-150) spart.
Mehr...
Kundenbewertungen zu SINCLAIR INTERNATIONAL L.E. WILSON DEBURRING TOOL WITH HOLDER
Anzahl der Bewertungen: 8
Von brownells.com: 8
Durchschnittliche Bewertung: 4
Works great with Sinclair power center(19.02.2013)
Nice tool. Chucking it up in the Sinclair power center made for the nicest deburring session I've ever had. Darn near effortless.
Do need to keep an eye on how long you hold the case in there with it under power.
Wrong dimensions(05.05.2015)
Holder will only accept chamfer end of L.E. Wilson tool which measures .621. The deburring end of the Wilson tool measures
.6235 and will not enter the holder.
Excellent tool(11.03.2016)
This is great combo. The Wilson deburr tool is very nicely made and sharp. The holder is also really nicely made, with unusually good attention to detail.
Thanks, Sinclair, for offering a unique product.
needed some fitting(19.12.2011)
The description says that the RCBS tool will fit, but my RCBS case mouth chamfer/deburr tool didn't quite fit in this adapter. I chucked the RCBS tool in my drill by the pin on the outside deburring end and spun it while using sandpaper on the tool. This got me pretty close, but it was still a little too tight and required pliers to switch tool ends. I ended up using a fine grit sanding drum on my rotary tool inside the Sinclair adapter to smooth the inside out just a little bit and now it's easy to remove the RCBS tool to switch ends, but still has a snug fit. If it had've fit this good out of the box, it would've gotten 5 stars, but the fitting was a bit annoying. I'd probably still buy again.
AN UNBIASED TOOL REVIEW(07.01.2014)
SUPER NICE & WELL MADE TOOL TO HOLD YOUR DEBURRING TOOL FOR SPINNING WITH A DRILL. HOWEVER, IT WILL NOT EASILY FIT THE "RCBS" DEBURRING TOOL. THE "ID" OF THE HOLDER WILL HAVE TO BE ENLARGED OR THE "OD" OF THE DEBURRING TOOL REDUCED A FEW THOUSANDTHS TO ACHIEVE A PROPER FIT. ANOTHER OPTION WOULD BE TO SIMPLY ORDER A "WILSON" DEBURRING TOOL IF YOU DO NOT ALREADY OWN ONE.
Perfect!!(19.08.2015)
Not sure why some people give it 2 stars when they're trying to use the wrong deburring tool inside... It's made for the Wilson deburring tool, and fits 100% perfectly, and works GREAT!!!
One of the best tools I've ever bought(03.12.2016)
Deburring and chamfering were my least favorite operations of case prep. Now they're a breeze. Just make sure you follow the recommendation an use a Wilson chamfering tool, which I already had. I used to get the worst hand cramps when I would twist the chamfering tool by hand. This holder eliminates that and is much faster to boot! I have mine inserted into my B&D cordless screwdriver, but a drill works too. I just wish I had purchased one of these years ago.
Just what I was looking for!(14.07.2018)
I purchased this item to use with my L.E. Wilson inside/outside 45 degree chamfer tool. It works like it was made for it, which of course it was! There are chamfer tools with a round shaft that will work in a drill press, but the gun sites don't seem to carry them any more. This adapter allows you to do that with the combo tool.
I use it to chamfer the throat of the chamber on black powder reproduction/replica guns cylinders. Makes for easy starting the round balls, and less lead shaving. Brownells also sells a 45 degree brass lapping tool that does have the drill press stem. Use this with their lapping compound to get a smooth finish. See picture.