Forends taper slightly for a natural hold; Remington 1100 Forend is checkered and is similar to the factory forend. Includes sling swivel stud.
SPECS: Fiberglass, black matte finish. 1100 Forend - 11" (27.9cm) long, 1.825" (4.7cm) diameter, 8 oz. (227 g) wt.
Mehr...
Wetterfester Favorit der Strafverfolgungsbehörden
Die Forends sind leicht konisch geformt für einen natürlichen Halt; der Remington 1100 Forend ist geriffelt und ähnelt dem Originalforend. Inklusive Tragegurt-Befestigungsbolzen.
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 4,7
Nice(20.07.2010)
Hardest part of this is getting the old forend off, the tool is included, I had a hard time loosening my old one so I ran soapy water in the tube and hit it with a rubber mallet gently and it popped of after drying it and oiling thouroughly I put on new forearm great low profile and tight fit slicks up the gun nicely
Great product(03.06.2011)
I like this fore end. It has heavy texture, and will give you an excellent grip, even in cold wet conditions. The other nice thing is that is doesn't overlap the receiver so most aftermarket side saddles will fit without any modification.
nice for small hands but.......(09.08.2011)
this thing is nice and slim and would work well for small hands but its small size lends the opportunity for one to burn their fingers on a hot barrel during defensive and stress fire conditions
Info for 500 short slide and early 500A(07.03.2012)
This forend is for the 7 3/4 slide, but will work on the shorter 6 3/4 with just 2-3 minutes work. First, get the Hogue 835 slide adapter nut for 9.99, hunt up a 1 1/4 holesaw, mount it in a drill press and drill hole deeper. its that simple. Saves buying the 60.00 long action slide kit. Hope it helps.
Nice product(07.03.2012)
The Choate forend is a well made product. And at half the price of a Mossberg poly one or other aftermarket forends, the price cant be beat.I have big hands and the forend is very comfortable. I have had other brand forends on my Mossy 500, including the stock wood and other poly forends, including a pistol grip forend. I must say this one is my favorite. Shipping was fast, the Choate forend came with a tool to use to change it. Thank you Brownells and Choate.
Almost returned this item. Glad I didn't(29.10.2013)
I purchased this as a replacement forend for an 11-87 Police in order to have the clearance needed to mount a sidesaddle shell holder on the receiver(factory forend would not permit this without modification). Initially, I did not think the Choate forend would fit after it became jammed during installation. Once I got it back off the assembly, I discovered the Gas Cylinder Collar (GCC) was stuck hard in the forend and would not fully seat. I had this forend boxed up and ready to return to Brownells when I started reading some Internet discussion regarding the purpose of the GCC and what guns require it and what guns do not. After further research and observation, I concluded that MY particular 11-87P did NOT require the use of the GCC. Omitting that part allowed the Choate forearm to fit perfectly. In addition, while my gun previously had a fair amount of wiggle and play between the forend, the barrel and the receiver (annoying but it didn't seem to affect operation) the Choate forend has eliminated that play and the gun feels much more solid in my hands. Forty rounds of heavy 00 Buck (9 pellets @ 1300fps) and a disassembly confirmed that everything was running better than ever WITH the Choate forend and WITHOUT the GCC. I gave this product 4* because it did not come with any installation instructions regarding the use of the GCC and the fact that it would not fit. DISCLAIMER- I am not a gunsmith and I am not advising ANYBODY to omit factory parts on THEIR 11-87 Police until they are certain of the consequences. A few sidenotes: The Choate forend has a much more aggressive texture than the Remington factory synthetic forend. The Choate forend DOES NOT comes with a sling swivel mount as indicated in the product description. It DOES allow the use of "sidesaddle" attachments to the receiver as it does not overlap onto the receiver as far back as the factory forend. The Choate forend does NOT have the ball detent found on many factory forends.
Artikel-Nr.: 159101110 CHOATE REM. 1100 FOREND Herstellerproduktnummer: 1/2/2012 Die Forends sind leicht konisch geformt für einen natürlichen Halt; der Remington 1100 Forend ist geriffelt und ähnelt dem Originalforend. Inklusive Tragegurt-Befestigungsbolzen.
79.9EUR079,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
US-Exportklassifizierung: 0A501.y.1
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Entdecke den SHOTGUN FIBERGLASS FORENDS für Remington 1100! 🛠️ Leicht, griffig und perfekt für deinen Schuss. Jetzt kaufen!
Forends taper slightly for a natural hold; Remington 1100 Forend is checkered and is similar to the factory forend. Includes sling swivel stud.
SPECS: Fiberglass, black matte finish. 1100 Forend - 11" (27.9cm) long, 1.825" (4.7cm) diameter, 8 oz. (227 g) wt.
Mehr...
Wetterfester Favorit der Strafverfolgungsbehörden
Die Forends sind leicht konisch geformt für einen natürlichen Halt; der Remington 1100 Forend ist geriffelt und ähnelt dem Originalforend. Inklusive Tragegurt-Befestigungsbolzen.
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 4,7
Nice(20.07.2010)
Hardest part of this is getting the old forend off, the tool is included, I had a hard time loosening my old one so I ran soapy water in the tube and hit it with a rubber mallet gently and it popped of after drying it and oiling thouroughly I put on new forearm great low profile and tight fit slicks up the gun nicely
Great product(03.06.2011)
I like this fore end. It has heavy texture, and will give you an excellent grip, even in cold wet conditions. The other nice thing is that is doesn't overlap the receiver so most aftermarket side saddles will fit without any modification.
nice for small hands but.......(09.08.2011)
this thing is nice and slim and would work well for small hands but its small size lends the opportunity for one to burn their fingers on a hot barrel during defensive and stress fire conditions
Info for 500 short slide and early 500A(07.03.2012)
This forend is for the 7 3/4 slide, but will work on the shorter 6 3/4 with just 2-3 minutes work. First, get the Hogue 835 slide adapter nut for 9.99, hunt up a 1 1/4 holesaw, mount it in a drill press and drill hole deeper. its that simple. Saves buying the 60.00 long action slide kit. Hope it helps.
Nice product(07.03.2012)
The Choate forend is a well made product. And at half the price of a Mossberg poly one or other aftermarket forends, the price cant be beat.I have big hands and the forend is very comfortable. I have had other brand forends on my Mossy 500, including the stock wood and other poly forends, including a pistol grip forend. I must say this one is my favorite. Shipping was fast, the Choate forend came with a tool to use to change it. Thank you Brownells and Choate.
Almost returned this item. Glad I didn't(29.10.2013)
I purchased this as a replacement forend for an 11-87 Police in order to have the clearance needed to mount a sidesaddle shell holder on the receiver(factory forend would not permit this without modification). Initially, I did not think the Choate forend would fit after it became jammed during installation. Once I got it back off the assembly, I discovered the Gas Cylinder Collar (GCC) was stuck hard in the forend and would not fully seat. I had this forend boxed up and ready to return to Brownells when I started reading some Internet discussion regarding the purpose of the GCC and what guns require it and what guns do not. After further research and observation, I concluded that MY particular 11-87P did NOT require the use of the GCC. Omitting that part allowed the Choate forearm to fit perfectly. In addition, while my gun previously had a fair amount of wiggle and play between the forend, the barrel and the receiver (annoying but it didn't seem to affect operation) the Choate forend has eliminated that play and the gun feels much more solid in my hands. Forty rounds of heavy 00 Buck (9 pellets @ 1300fps) and a disassembly confirmed that everything was running better than ever WITH the Choate forend and WITHOUT the GCC. I gave this product 4* because it did not come with any installation instructions regarding the use of the GCC and the fact that it would not fit. DISCLAIMER- I am not a gunsmith and I am not advising ANYBODY to omit factory parts on THEIR 11-87 Police until they are certain of the consequences. A few sidenotes: The Choate forend has a much more aggressive texture than the Remington factory synthetic forend. The Choate forend DOES NOT comes with a sling swivel mount as indicated in the product description. It DOES allow the use of "sidesaddle" attachments to the receiver as it does not overlap onto the receiver as far back as the factory forend. The Choate forend does NOT have the ball detent found on many factory forends.
Hilfe und Kontakt
(0) 
Newsletter
Klassische Ansicht
Mobile Ansicht