Looking to change out the barrel on your Savage Model 110 rifle action? Thanks to International Barrels, changing out your rifle's barrel doesn't have to involve a trip to the gunsmith! The specially developed design of these Savage small-shank pre-fit barrels means you can swap out your rifle caliber right at home. Each International Barrels Pre-Fit Savage Small Shank precision barrel is constructed with a barrel-nut system that can be threaded onto your action right at home. Once the barrel is threaded into place, simply check its positioning with a set of headspace gauges and then tighten the barrel nut down to its proper torque settings. Then you're done! The easy attachment system of these International Barrels Pre-Fit Barrels isn't all you're getting. These gun barrels are button-rifled and are made to precision tolerances, double-checked at every step along the way. The barrels are made using the company's Medium contour, which features a straight taper from the breech to the muzzle. Each barrel is threaded with 5/8-24 TPI muzzle threads. The company warns that some stocks may need to be inlet to allow clearance for the barrel nut.
Möchtest du den Lauf deines Savage Model 110 Gewehrs wechseln? Dank International Barrels muss der Austausch des Gewehrlaufs nicht zum Büchsenmacher führen! Das speziell entwickelte Design dieser Savage Small-Shank Pre-Fit Läufe ermöglicht es dir, das Kaliber deines Gewehrs ganz einfach zu Hause zu wechseln. Jeder Pre-Fit Savage Small Shank Präzisionslauf von International Barrels wird mit einem Laufmutter-System konstruiert, das direkt auf dein Gewehr geschraubt werden kann. Sobald der Lauf an Ort und Stelle geschraubt ist, überprüfe einfach seine Position mit einem Satz Kopfplatzierungslehren und ziehe dann die Laufmutter auf die richtigen Drehmomentwerte fest. Dann bist du fertig! Das einfache Befestigungssystem dieser Pre-Fit Läufe von International Barrels ist nicht alles, was du bekommst. Diese Gewehrläufe sind mit Knopf gezogen und nach präzisen Toleranzen gefertigt, die bei jedem Schritt sorgfältig überprüft werden. Die Läufe werden mit dem Medium-Kontur des Unternehmens hergestellt, der einen geraden Verlauf vom Patronenlager bis zur Mündung aufweist. Jeder Lauf ist mit 5/8-24 TPI Mündungsgewinde versehen. Das Unternehmen warnt, dass einige Schäfte möglicherweise bearbeitet werden müssen, um Platz für die Laufmutter zu schaffen.