An excellent base from which to build a beautiful, smooth and reliably functioning gun. Includes a redesigned trigger spring and a reduced power hammer spring to give controlled trigger pull. Also includes extra power, base pin latch spring. Factory hammer spring is 23 lb. Kit contains 19 lb. hammer spring, 25% reduced power trigger spring, and increased power, base pin latch spring (use an old model only).
Mehr...
"Garantiert Überlegen"
Eine ausgezeichnete Grundlage, um eine schöne, sanfte und zuverlässig funktionierende Waffe aufzubauen. Enthält eine neu gestaltete Abzugfeder und eine Federspannung für den Hahn, um einen kontrollierten Abzug zu gewährleisten. Außerdem ist eine stärkere Feder für den Basisstiftverschluss enthalten. Die Werksfeder für den Hahn hat 23 lb. Das Kit enthält eine 19 lb. Hahnfeder, eine um 25 % reduzierte Abzugfeder und eine stärkere Feder für den Basisstiftverschluss (nur für alte Modelle verwenden).
Mehr...
Kundenbewertungen zu BROWNELLS RSA-108 19LB PRO-SPRING KIT FOR OLD MODEL & OLD ARMY
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 3,5
Disappointed(22.12.2010)
Make by Wolff not Brownells. Does not fit the Ruger Old Army as advertised. To long by about 8 coils.
Disappointed back again(02.01.2011)
My first review of the spring kit may have been incomplete. To Brownells credit, they published my review even though it was unfavorable to their product. My Ruger Old Army was manufactured in 1994 and has the same backstrap as the internal lock Blackhawks. The Wolf springs do not work with the internal lock as far as I am able to check. (I have not called Wolf Springs as yet â a failing on my part.) Other people that I associate with and who work on guns swear by Brownells and feel that I should have been fairer in my previous review. If you do not have the internal lock backstrap on your Old Army then the spring kit will work on your firearm.
Works great on the Single Six(26.04.2015)
This kit works wonderful on the Old model single six. Took the trigger pull from 5 plus pounds down to 2 3/4lbs. The reduced hammer spring has plenty punch for .22LR.
Works as Advertised(01.07.2015)
I used this kit on a late manufacture Old Army. The hammer spring is about 0.9" longer than the original, but will compress onto the strut with no issues. Reduces hammer cocking force, but has plenty of power to ignite percussion caps. The reduced power trigger spring significantly improves trigger pull.
Artikel-Nr.: 080665108 BROWNELLS RSA-108 19LB PRO-SPRING KIT FOR OLD MODEL & OLD ARMY Herstellerproduktnummer: 95307050806105645 Eine ausgezeichnete Grundlage, um eine schöne, sanfte und zuverlässig funktionierende Waffe aufzubauen. Enthält eine neu gestaltete Abzugfeder und eine Federspannung für den Hahn, um einen kontrollierten Abzug zu gewährleisten. Außerdem ist eine stärkere Feder für den Basisstiftverschluss enthalten. Die Werksfeder für den Hahn hat 23 lb. Das Kit enthält eine 19 lb. Hahnfeder, eine um 25 % reduzierte Abzugfeder und eine stärkere Feder für den Basisstiftverschluss (nur für alte Modelle verwenden).
26.9EUR026,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
An excellent base from which to build a beautiful, smooth and reliably functioning gun. Includes a redesigned trigger spring and a reduced power hammer spring to give controlled trigger pull. Also includes extra power, base pin latch spring. Factory hammer spring is 23 lb. Kit contains 19 lb. hammer spring, 25% reduced power trigger spring, and increased power, base pin latch spring (use an old model only).
Mehr...
"Garantiert Überlegen"
Eine ausgezeichnete Grundlage, um eine schöne, sanfte und zuverlässig funktionierende Waffe aufzubauen. Enthält eine neu gestaltete Abzugfeder und eine Federspannung für den Hahn, um einen kontrollierten Abzug zu gewährleisten. Außerdem ist eine stärkere Feder für den Basisstiftverschluss enthalten. Die Werksfeder für den Hahn hat 23 lb. Das Kit enthält eine 19 lb. Hahnfeder, eine um 25 % reduzierte Abzugfeder und eine stärkere Feder für den Basisstiftverschluss (nur für alte Modelle verwenden).
Mehr...
Kundenbewertungen zu BROWNELLS RSA-108 19LB PRO-SPRING KIT FOR OLD MODEL & OLD ARMY
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 3,5
Disappointed(22.12.2010)
Make by Wolff not Brownells. Does not fit the Ruger Old Army as advertised. To long by about 8 coils.
Disappointed back again(02.01.2011)
My first review of the spring kit may have been incomplete. To Brownells credit, they published my review even though it was unfavorable to their product. My Ruger Old Army was manufactured in 1994 and has the same backstrap as the internal lock Blackhawks. The Wolf springs do not work with the internal lock as far as I am able to check. (I have not called Wolf Springs as yet â a failing on my part.) Other people that I associate with and who work on guns swear by Brownells and feel that I should have been fairer in my previous review. If you do not have the internal lock backstrap on your Old Army then the spring kit will work on your firearm.
Works great on the Single Six(26.04.2015)
This kit works wonderful on the Old model single six. Took the trigger pull from 5 plus pounds down to 2 3/4lbs. The reduced hammer spring has plenty punch for .22LR.
Works as Advertised(01.07.2015)
I used this kit on a late manufacture Old Army. The hammer spring is about 0.9" longer than the original, but will compress onto the strut with no issues. Reduces hammer cocking force, but has plenty of power to ignite percussion caps. The reduced power trigger spring significantly improves trigger pull.