Über 300.000 Kunden - wir sagen Danke!

40,000+ Produkte aus Jagd und Schiesssport

Optimiere dein Plunger Tube mit dem BROWNELLS 1911 Plunger Tube Reamer Set. 🔧 Lange Reamer für perfekten Innendurchmesser und reibungslosen Betrieb!
  • BROWNELLS 1911 PLUNGER TUBE REAMER SET
  • BROWNELLS 1911 PLUNGER TUBE REAMER SET

BROWNELLS PLUNGER TUBE REAMER - BROWNELLS 1911 PLUNGER TUBE REAMER SET

050806020559 080771000

Eigenschaften

  • Waffentyp: 1911
  • Versandgewicht: 0,068kg
  • Versandhöhe: 61mm
  • Versandbreite: 61mm
  • Versandlänge: 226mm
  • UPC: 050806020559
  • Spezifikationen:
  • Marke: 1911
38.9 38.9 1 EUR
Sale
35 EUR 35,00 € 38,90 €

Preise inkl. MwSt., zzgl. Versand

Artikel-Nr.: 080771000

050806020559 Extra lange Reamer bringen das Plunger Tube nach dem Staken wieder auf den richtigen Innendurchmesser - und bieten ausreichend Federfreiheit für einen reibungslosen Betrieb.
Bestellbar, nicht vorrätig
1
2
3
4
5
6
7
8
9
10+
  • Spezifikationen:
  • Marke: 1911

Beschreibung:

Original anzeigen (Englisch)
Schnellere, engere Installation; beschädigungsfreies Entfernen
Extra lange Reamer bringen das Plunger Tube nach dem Staken wieder auf den richtigen Innendurchmesser - und bieten ausreichend Federfreiheit für einen reibungslosen Betrieb.

SPECS: Werkzeugstahl Reamer. Ungefähr 7-1⁄2" (17,7cm) lang. Enthält (1) .0925" (2,34mm) und (1) .108" (2,74mm) Durchmesser Reamer.

Eigenschaften

  • Waffentyp: 1911
  • Versandgewicht: 0,068kg
  • Versandhöhe: 61mm
  • Versandbreite: 61mm
  • Versandlänge: 226mm
  • UPC: 050806020559

Kundenbewertungen

Kundenbewertungen (3)

3,3 / 5
Wenig empfehlenswert

Brownells USA Not a Reamer 29.08.2017

1st off, they are not reamers! They are DRILL BITS. Care & a light touch must be used to keep them from biting into the steel. Drills are made for high speed. As soon as I tried to use them, both came loose from the handles. I had to super glue them into the handles to get them to work. However if used lightly and take your time, they will work. Brownells needs to fix the handle problem and change the heading from "Reamers" to "Hand drills". Kind of pricey for 2 drill bits with plastic handles, but they do work. As 35 yrs. as a Engineer/Tool & Die Maker, I know what I'm talking about.

Bedingt empfehlenswert

Brownells USA Could be better II. 02.02.2016

The reamers are very sharp. The issue was the shaft attached in the handle broke free easily. I used the handle to hold the shaft straight, I applied slight pressure, and turned the shaft with vise grips attached to the drill shaft. I corrected the problem using a 3 square file to cut channels lengthwise inside the handle. Then I cut grooves around the shaft. I drilled small holes in handle then cleaned everything with lacquer thinner. I pushed epoxy into the center hole until it flowed out the small drilled holes. Then I pushed the shaft back in and clamped it. Works well.

Schon gewusst?

Herstellerinformationen

Verantwortlicher Wirtschaftsakteur gemäß EU-Verordnung

Brownells Austria GmbH
Hauptstraße 13-15
2332 Hennersdorf
Österreich
info@brownells.at

Ups! Da ist etwas schiefgelaufen.

Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.

Zurück nach oben