The Arisaka Optic Leveler is an inexpensive, easy-to-use tool for leveling scopes mounted in rings or one-piece mounts. The base plate sits on the Picatinny rail or one-piece mount just below the turret cluster of the scope, and then the matching wedge is inserted from the side. As the 11 degree ramped surfaces of the wedge and base engage, the top of the wedge rises upwards and contacts the turret cluster, automatically leveling it. This updated version includes an offset slot in the leveler base, which helps provide more leeway on one-piece scope mounts that have ramped surfaces, such as the Aero Precision Ultralite mounts. This product includes the leveler base and both small and large wedges. The small wedge requires a space between the rail/mount and turret cluster from 0.190" to 0.730". The large wedge requires a space between the rail/mount and turret cluster from 0.680" to 1.200". Please note: some one-piece scope mounts like those made by Bobro may not have enough space, so be certain to check with your specific scope and mount. The leveler requires a flat surface directly below the turret cluster to function.
Der Arisaka Optic Leveler ist ein kostengünstiges, einfach zu bedienendes Werkzeug zum Nivellieren von Zielfernrohren, die in Ringen oder als Einteilmontage montiert sind. Die Basisplatte sitzt auf der Picatinny-Schiene oder der Einteilmontage direkt unter dem Turmcluster des Zielfernrohrs, und dann wird der passende Keil von der Seite eingesetzt. Wenn die 11-Grad-Rampenflächen des Keils und der Basis in Kontakt kommen, hebt sich die Oberseite des Keils nach oben und berührt das Turmcluster, wodurch es automatisch nivelliert wird. Diese aktualisierte Version enthält einen versetzten Schlitz in der Basis des Levelers, der mehr Spielraum bei Einteilmontagen bietet, die Rampenflächen haben, wie zum Beispiel die Aero Precision Ultralite-Montagen. Dieses Produkt umfasst die Leveler-Basis sowie sowohl kleine als auch große Keile. Der kleine Keil benötigt einen Abstand zwischen der Schiene/Montage und dem Turmcluster von 0,190" bis 0,730". Der große Keil benötigt einen Abstand zwischen der Schiene/Montage und dem Turmcluster von 0,680" bis 1,200". Bitte beachte: Einige Einteilmontagen, wie die von Bobro, haben möglicherweise nicht genügend Platz, also stelle sicher, dass du mit deinem spezifischen Zielfernrohr und der Montage überprüfst. Der Leveler benötigt eine flache Oberfläche direkt unter dem Turmcluster, um zu funktionieren.