This NT1500 Neck Turning Kit includes all four of the basic tools necessary for successful neck turning. Kit includes our NT1500 Neck Turning Tool, a Generation II Expander Die, a Neck Turning Mandrel and an Expander Mandrel all at a discounted price. You can also purchase your neck turning tool kit with our Sinclair Storage Case (80-15XX).
Mehr...
Dieses NT1500 Neck Turning Kit enthält alle vier grundlegenden Werkzeuge, die für erfolgreiches Neck Turning erforderlich sind. Das Kit beinhaltet unser NT1500 Neck Turning Tool, eine Generation II Expander Die, einen Neck Turning Mandrel und einen Expander Mandrel, alles zu einem reduzierten Preis. Du kannst dein Neck Turning Tool Kit auch mit unserem Sinclair Storage Case (80-15XX) erwerben.
Mehr...
Kundenbewertungen zu SINCLAIR INTERNATIONAL 22 CALIBER DELUXE NECK TURNING KIT
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 4,5
Great tool(28.10.2011)
I have turned necks before using RCBS tools mounted on the case trimmer. This tool is far and away more reliable and accurate.
I turn the cases with a case holder in a power screwdriver because I have a lot of cases to turn and limited time to do it. The finish obtained is far and away better than anything else I have tried or seen short of a lathe.
I use a little cutting oil on the inside and outside of the case and feed as slowly as I can to get a good finish. I have also used it to remove donuts from older cases - works like a charm!
Amazing results!(31.07.2015)
Takes a few minutes to get set up,...once adjusted and locked in,..works like a charm! Don't even consider using the hand turning tool, although it does work,..you can save A TON of time and get 100% better end results if you order the Lee 3 jaw chuck # 100-010-142WB and case spinner stud # 100-010-141WB
I'll attach a pic of an old piece of 6br brass I took two passes with the Lee drill attachment at slow speed (I think it's around 750rpm) and did a quick clean up with a 0000 nylon scuff pad.
Artikel-Nr.: 749011587 SINCLAIR INTERNATIONAL 22 CALIBER DELUXE NECK TURNING KIT Dieses NT1500 Neck Turning Kit enthält alle vier grundlegenden Werkzeuge, die für erfolgreiches Neck Turning erforderlich sind. Das Kit beinhaltet unser NT1500 Neck Turning Tool, eine Generation II Expander Die, einen Neck Turning Mandrel und einen Expander Mandrel, alles zu einem reduzierten Preis. Du kannst dein Neck Turning Tool Kit auch mit unserem Sinclair Storage Case (80-15XX) erwerben.
164.9EUR0164,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Brownells Austria GmbH
Hauptstraße 13-15
2332 Hennersdorf
Österreich
info@brownells.at
Artikel-Nr.: 749011590 SINCLAIR INTERNATIONAL 6.5MM DELUXE NECK TURNING KIT Dieses NT1500 Neck Turning Kit enthält alle vier grundlegenden Werkzeuge, die für erfolgreiches Neck Turning erforderlich sind. Das Kit beinhaltet unser NT1500 Neck Turning Tool, eine Generation II Expander Die, einen Neck Turning Mandrel und einen Expander Mandrel, alles zu einem reduzierten Preis. Du kannst dein Neck Turning Tool Kit auch mit unserem Sinclair Storage Case (80-15XX) erwerben.
164.9EUR0164,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
This NT1500 Neck Turning Kit includes all four of the basic tools necessary for successful neck turning. Kit includes our NT1500 Neck Turning Tool, a Generation II Expander Die, a Neck Turning Mandrel and an Expander Mandrel all at a discounted price. You can also purchase your neck turning tool kit with our Sinclair Storage Case (80-15XX).
Mehr...
Dieses NT1500 Neck Turning Kit enthält alle vier grundlegenden Werkzeuge, die für erfolgreiches Neck Turning erforderlich sind. Das Kit beinhaltet unser NT1500 Neck Turning Tool, eine Generation II Expander Die, einen Neck Turning Mandrel und einen Expander Mandrel, alles zu einem reduzierten Preis. Du kannst dein Neck Turning Tool Kit auch mit unserem Sinclair Storage Case (80-15XX) erwerben.
Mehr...
Kundenbewertungen zu SINCLAIR INTERNATIONAL 22 CALIBER DELUXE NECK TURNING KIT
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 4,5
Great tool(28.10.2011)
I have turned necks before using RCBS tools mounted on the case trimmer. This tool is far and away more reliable and accurate.
I turn the cases with a case holder in a power screwdriver because I have a lot of cases to turn and limited time to do it. The finish obtained is far and away better than anything else I have tried or seen short of a lathe.
I use a little cutting oil on the inside and outside of the case and feed as slowly as I can to get a good finish. I have also used it to remove donuts from older cases - works like a charm!
Amazing results!(31.07.2015)
Takes a few minutes to get set up,...once adjusted and locked in,..works like a charm! Don't even consider using the hand turning tool, although it does work,..you can save A TON of time and get 100% better end results if you order the Lee 3 jaw chuck # 100-010-142WB and case spinner stud # 100-010-141WB
I'll attach a pic of an old piece of 6br brass I took two passes with the Lee drill attachment at slow speed (I think it's around 750rpm) and did a quick clean up with a 0000 nylon scuff pad.