Rugged and precise sights, machined to hug the receiver for lowest line of sight, least protrusion. Audible-click, ¼" minute adjustments for elevation and windage. Elevation slide is scribed in 3 minute increments. Quick release allows slide to be removed with a press of a button. Elevation stop screw permits instantaneous return to zero.
SPECS: Aluminum, black, anodized. Comes with two apertures, ½" (12.7mm) x .093" (2.3mm) and 5/8" (15.8mm) x .040" (1.1mm). Model 66 LA fits Marlin 336.
Mehr...
Robuste und präzise Visierungen, gefertigt um eng am Empfänger zu sitzen für die niedrigste Sichtlinie und minimalen Überstand. Hörbare Klicks, ¼" Minutenanpassungen für Höhen- und Windkorrekturen. Der Höhenverstellmechanismus ist in 3 Minuten-Schritten eingeteilt. Der Schnellverschluss ermöglicht das Entfernen des Schiebers mit einem Tastendruck. Die Höhenstopp-Schraube erlaubt eine sofortige Rückkehr zu Null.
TECHNISCHE DATEN: Aluminium, schwarz, anodisiert. Kommt mit zwei Aperturen, ½" (12,7mm) x .093" (2,3mm) und 5/8" (15,8mm) x .040" (1,1mm). Modell 66 LA passt auf Marlin 336.
Mehr...
Kundenbewertungen zu LYMAN MARLIN 336 ADJUSTABLE TANG SIGHT MODEL 66 LA BLACK
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 3,5
As good as it gets.(23.11.2009)
I bought this sight for my Marlin model 1895 rifle, (back when Marlin made their lever action rifles pre-drilled & tapped for this sight.) I have used it for over 20 years and cannot think of a way to improve on it. When I take the top assembly off and store it, (for those few times I used a scope,) the "base" stayed in place. When I put the upper assembly back on I was back "on" zero too. This never failed. Adjustments are easy and after hundreds (thousands?) of rounds and fierce recoil ("sooped-up" 45/70) they've never moved. Now Marlin rifles are not set-up for this fine sight but it would certainly be worth the work.
Older ones are great(26.12.2009)
When they were made out of steel, they were great. I bought one about a year ago and it is made of aluminum. I have had to squeeze the slotted aperture rail and peen the elevation rails to tighten it up. Lyman go back to steel!!!
Artikel-Nr.: 539066002 LYMAN MARLIN 336 ADJUSTABLE TANG SIGHT MODEL 66 LA BLACK Herstellerproduktnummer: 3662215011516322159 Robuste und präzise Visierungen, gefertigt um eng am Empfänger zu sitzen für die niedrigste Sichtlinie und minimalen Überstand. Hörbare Klicks, ¼" Minutenanpassungen für Höhen- und Windkorrekturen. Der Höhenverstellmechanismus ist in 3 Minuten-Schritten eingeteilt. Der Schnellverschluss ermöglicht das Entfernen des Schiebers mit einem Tastendruck. Die Höhenstopp-Schraube erlaubt eine sofortige Rückkehr zu Null.
209.9EUR0209,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Rugged and precise sights, machined to hug the receiver for lowest line of sight, least protrusion. Audible-click, ¼" minute adjustments for elevation and windage. Elevation slide is scribed in 3 minute increments. Quick release allows slide to be removed with a press of a button. Elevation stop screw permits instantaneous return to zero.
SPECS: Aluminum, black, anodized. Comes with two apertures, ½" (12.7mm) x .093" (2.3mm) and 5/8" (15.8mm) x .040" (1.1mm). Model 66 LA fits Marlin 336.
Mehr...
Robuste und präzise Visierungen, gefertigt um eng am Empfänger zu sitzen für die niedrigste Sichtlinie und minimalen Überstand. Hörbare Klicks, ¼" Minutenanpassungen für Höhen- und Windkorrekturen. Der Höhenverstellmechanismus ist in 3 Minuten-Schritten eingeteilt. Der Schnellverschluss ermöglicht das Entfernen des Schiebers mit einem Tastendruck. Die Höhenstopp-Schraube erlaubt eine sofortige Rückkehr zu Null.
TECHNISCHE DATEN: Aluminium, schwarz, anodisiert. Kommt mit zwei Aperturen, ½" (12,7mm) x .093" (2,3mm) und 5/8" (15,8mm) x .040" (1,1mm). Modell 66 LA passt auf Marlin 336.
Mehr...
Kundenbewertungen zu LYMAN MARLIN 336 ADJUSTABLE TANG SIGHT MODEL 66 LA BLACK
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 3,5
As good as it gets.(23.11.2009)
I bought this sight for my Marlin model 1895 rifle, (back when Marlin made their lever action rifles pre-drilled & tapped for this sight.) I have used it for over 20 years and cannot think of a way to improve on it. When I take the top assembly off and store it, (for those few times I used a scope,) the "base" stayed in place. When I put the upper assembly back on I was back "on" zero too. This never failed. Adjustments are easy and after hundreds (thousands?) of rounds and fierce recoil ("sooped-up" 45/70) they've never moved. Now Marlin rifles are not set-up for this fine sight but it would certainly be worth the work.
Older ones are great(26.12.2009)
When they were made out of steel, they were great. I bought one about a year ago and it is made of aluminum. I have had to squeeze the slotted aperture rail and peen the elevation rails to tighten it up. Lyman go back to steel!!!