Fully-machined hardened steel mount with three-point mounting, provides a stable, secure base for mounting large objective scopes. Easily clamps to the charger guide dovetail and receiver mount lug without modifications to rifle. Heavy, forward locking screw gives rock solid stability at the receiver ring. Sight channel allows back-up use of iron sights without removing scope.
Vollständig bearbeitete, gehärtete Stahlmontage mit dreipunktiger Befestigung, bietet eine stabile, sichere Basis für die Montage von großen Zielfernrohren. Lässt sich problemlos an der Ladeführungs-Dovetail und der Empfänger-Montageöse anbringen, ohne Modifikationen am Gewehr vorzunehmen. Der schwere, nach vorne verriegelnde Schraube sorgt für absolute Stabilität am Empfänger-Ring. Der Sichtkanal ermöglicht die Nutzung von Kimme und Korn, ohne das Zielfernrohr abzunehmen.
Kundenbewertungen zu SMITH ENTERPRISE M14 SCOPE MOUNT
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 3,3
Should have bought a Sadlak.(14.11.2010)
I've been trying to get this mount to work for over 3 yrs. Shoots 20" high with MK IV scope adjusted to full down limit (that's 45 minutes down from mechanical center). Tried different rings (Smith, Burris Signature), adding shims between rings and mount, raising front of mount with forward setscrew. Shoots groups under 1" @ 100yds when installed per instructions with Smith rings, but 20" high. Shot like a shotgun (6" groups) with other attempts to lower point of impact. Mount manufacturer said SA, NM, M1A not manufactured to tolerance. It groups under an inch! Should have bought a Sadlak.
One of the Best Mounts for M1A/M14(16.12.2010)
This is a good Mount. A little more difficult to install than a regular mount like bolt guns but this is due to the nature of the M14. Sadlak and Smith Enterprise are very much alike if not exactly. The Mounts are manufactured to G.I. receiver specs. I have installed these on many M14's in Iraq. But some Springfield's Receivers are not to G.I. specs. You can send the rifle to Smith Enterprise or another competent gunsmith who is good with these style of rifles. I would recommend this mount wholeheartedly. I've never had problems with it that could not be overcame.
Rock Solid(09.08.2012)
Great mount, not the easiest to install but well worth the time and money. Before trying to put it on - Read the instructions!
Artikel-Nr.: 851000001 SMITH ENTERPRISE M14 SCOPE MOUNT Herstellerproduktnummer: 2006 Vollständig bearbeitete, gehärtete Stahlmontage mit dreipunktiger Befestigung, bietet eine stabile, sichere Basis für die Montage von großen Zielfernrohren. Lässt sich problemlos an der Ladeführungs-Dovetail und der Empfänger-Montageöse anbringen, ohne Modifikationen am Gewehr vorzunehmen. Der schwere, nach vorne verriegelnde Schraube sorgt für absolute Stabilität am Empfänger-Ring. Der Sichtkanal ermöglicht die Nutzung von Kimme und Korn, ohne das Zielfernrohr abzunehmen.
579.9EUR8579,90 €
*
Lieferzeit ca. 14-21 Werktage. 8 Stk. im Lager USA
Die M14 Tactical Scope Mount bietet eine stabile Basis für große Zieloptiken mit einer robusten Drei-Punkt-Befestigung.
Sie lässt sich ohne Modifikationen am Gewehr anbringen und ermöglicht die Nutzung von Eisenvisieren, ohne das Zielfernrohr abzunehmen.
Hergestellt aus gehärtetem 4140 Stahl mit einer Nitrierbeschichtung für zusätzliche Haltbarkeit und Stabilität.
Eigenschaften
Color:
Black
Marke:
Springfield
Material:
Steel
Modell:
M14,M1A
Number of Bases:
1-Piece
Style:
Tactical Bases
Versandgewicht: 0,363kgVersandhöhe: 41mmVersandbreite: 91mmVersandlänge: 165mm
Entdecke die M14 Tactical Scope Mount von Smith Enterprise! Stabil, sicher und einfach zu montieren. Ideal für dein Zielfernrohr! 🔭
Fully-machined hardened steel mount with three-point mounting, provides a stable, secure base for mounting large objective scopes. Easily clamps to the charger guide dovetail and receiver mount lug without modifications to rifle. Heavy, forward locking screw gives rock solid stability at the receiver ring. Sight channel allows back-up use of iron sights without removing scope.
Vollständig bearbeitete, gehärtete Stahlmontage mit dreipunktiger Befestigung, bietet eine stabile, sichere Basis für die Montage von großen Zielfernrohren. Lässt sich problemlos an der Ladeführungs-Dovetail und der Empfänger-Montageöse anbringen, ohne Modifikationen am Gewehr vorzunehmen. Der schwere, nach vorne verriegelnde Schraube sorgt für absolute Stabilität am Empfänger-Ring. Der Sichtkanal ermöglicht die Nutzung von Kimme und Korn, ohne das Zielfernrohr abzunehmen.
Kundenbewertungen zu SMITH ENTERPRISE M14 SCOPE MOUNT
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 3,3
Should have bought a Sadlak.(14.11.2010)
I've been trying to get this mount to work for over 3 yrs. Shoots 20" high with MK IV scope adjusted to full down limit (that's 45 minutes down from mechanical center). Tried different rings (Smith, Burris Signature), adding shims between rings and mount, raising front of mount with forward setscrew. Shoots groups under 1" @ 100yds when installed per instructions with Smith rings, but 20" high. Shot like a shotgun (6" groups) with other attempts to lower point of impact. Mount manufacturer said SA, NM, M1A not manufactured to tolerance. It groups under an inch! Should have bought a Sadlak.
One of the Best Mounts for M1A/M14(16.12.2010)
This is a good Mount. A little more difficult to install than a regular mount like bolt guns but this is due to the nature of the M14. Sadlak and Smith Enterprise are very much alike if not exactly. The Mounts are manufactured to G.I. receiver specs. I have installed these on many M14's in Iraq. But some Springfield's Receivers are not to G.I. specs. You can send the rifle to Smith Enterprise or another competent gunsmith who is good with these style of rifles. I would recommend this mount wholeheartedly. I've never had problems with it that could not be overcame.
Rock Solid(09.08.2012)
Great mount, not the easiest to install but well worth the time and money. Before trying to put it on - Read the instructions!