Full length die sets are for bottleneck rifle and pistol cases, and they include a full length sizing die and a seater die. The full length die will bump the shoulder of the case to extent the die is adjusted up or down in the press. We suggest using a cartridge headspace gage tool to get the correct shoulder bump. The full length die also sizes the body of the case so it will chamber easily for the next firing, then the die decaps the spent primer. The expander ball passes through the neck of the case and sizes the neck to the correct tension. Cases must be lubricated before full length sizing. The RCBS seater dies for bottleneck cases will seat bullets correctly in full length sized cases or neck sized cases. These seater dies have a built-in crimp ring to enable you to crimp the case into the bullet if you wish to. The seater die is easily adjusted to crimp or not to crimp by raising or lowering the die position in the press. Full length 2 die sets are the basic building block of the reloading process. Many shooters wear out multiple barrels or rifles using just one full length reloading die set. We recommend that new reloaders start with a full length die set and learn how to set the dies up correctly before they jump in to other types of reloading dies.
Die Full Length Die Sets sind für Flaschenhals-Repetier- und Pistolenpatronen gedacht und enthalten einen Full Length Sizing Die sowie einen Seating Die. Der Full Length Die wird die Schulter der Patrone anheben, je nachdem, wie der Die in der Presse eingestellt ist. Wir empfehlen die Verwendung eines Patronen-Hülsenmaßwerkzeugs, um den richtigen Schulterabstand zu erhalten. Der Full Length Die formt auch den Körper der Patrone, sodass sie beim nächsten Schuss problemlos in die Kammer passt, und der Die entfernt die abgebrannte Zündhütchen. Die Expanderkugel durchläuft den Hals der Patrone und formt ihn auf die richtige Spannung. Die Hülsen müssen vor dem Full Length Sizing geschmiert werden. Die RCBS Seating Dies für Flaschenhals-Hülsen setzen die Geschosse korrekt in Full Length sized Hülsen oder neck sized Hülsen ein. Diese Seating Dies verfügen über einen integrierten Crimp-Ring, der es dir ermöglicht, die Hülse um das Geschoss zu crimpen, wenn du das möchtest. Der Seating Die lässt sich leicht einstellen, um zu crimpen oder nicht zu crimpen, indem du die Die-Position in der Presse anhebst oder absenkst. Full Length 2 Die Sets sind das grundlegende Bauelement des Wiederladeprozesses. Viele Schützen nutzen mehrere Läufe oder Gewehre, indem sie nur ein Full Length Wiederlade-Dieset verwenden. Wir empfehlen neuen Wiederladern, mit einem Full Length Die Set zu beginnen und zu lernen, wie man die Dies richtig einstellt, bevor sie sich an andere Arten von Wiederlade-Dies wagen.