Minimal profile sling adapter plate provides secure, ambidextrous attachment for single-point tactical slings on carbines or converted shotguns with M4 collapsible buttstocks. The attachment loop centers under the receiver extension nut, out of the way, where it can’t snag on clothing, gear, brush or the sling, and won’t interfere with access to the selector lever. Helps weapon hang flat against your body when released, yet also allows fast, positive re-grip when needed. Accepts most sling hooks, including MASH hooks, H&K connectors, and ZM-style clasps. Fits M4-type collapsible stocks with mil-spec and commercial buffer tubes, including shotgun conversions that use the M4 tube. Precision machined from high-quality steel, then Parkerized dark gray for wear resistance and a close match to factory rifle finishes.
SPECS: Steel, black, matte, Parkerized finish.
Mehr...
Ultra-niedriges Profil, snag-freies Design
Die minimalistische Sling-Adapterplatte bietet eine sichere, beidhändige Befestigung für Einpunkt-Taktikgurte an Karabinern oder umgebauten Schrotflinten mit M4-Kollaps-Schulterstützen. Die Befestigungsschlaufe befindet sich unter der Empfänger-Erweiterungsmutter, außer Sichtweite, wo sie sich nicht an Kleidung, Ausrüstung, Gestrüpp oder dem Sling verfangen kann und nicht den Zugang zum Selektorschalter stört. Sie hilft, die Waffe flach an deinem Körper hängen zu lassen, wenn sie losgelassen wird, ermöglicht jedoch auch ein schnelles, sicheres Wiederergreifen, wenn nötig. Akzeptiert die meisten Sling-Haken, einschließlich MASH-Haken, H&K-Verbinder und ZM-Stil Verschlüsse. Passt zu M4-Typ Kollaps-Schulterstützen mit Mil-Spec und kommerziellen Buffer-Rohren, einschließlich Schrotflinten-Umbauten, die das M4-Rohr verwenden. Präzisionsbearbeitet aus hochwertigem Stahl, dann Parkerisiert in Dunkelgrau für Verschleißfestigkeit und eine enge Übereinstimmung mit den Werksfinishs von Gewehren.
Kundenbewertungen zu CROSSTAC SINGLE-POINT SLING ADAPTER
Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 4,5
Minimul bulk, and gets the job done.(05.09.2009)
This thing is great. You don't have the bulk of loops sticking out near the charging handle and it's completely ambidextrous.
May not be able to use all 6 positions(06.09.2009)
I just built another carbine using this item with a 6-position mil-spec tube and Magpul MOE mil-spec stock. After install was done, I found the stock wouldn't go all the way forward as it hits against the sling connection point. I tried backing the tube out but it was already at the proper depth in order to engage the buffer retainer. 5 out of 6 positions on the stock isn't a huge deal for me personally but somebody else may feel shorted. I would only recommend this to another user if they are aware of the above limitations on stock positions. Does it work for a single point sling attachment? Yes.
Great No-snag design(25.11.2010)
Installed this on 2 of my 5 ARs and it beats most other designs for single point sling attachment. The ones with eyelets off to the side get hung up on your vest and clothing and ruin the sleek lines of your rifle. The only modification you need to make to your stock is remove a very small ammount of material if you wish to use the shortest setting on your 6 position stock. Very unnoticable.
Like it(16.02.2011)
With the exception already mentioned of not being able to collaspe the stock all the way I like this better. You're not stuck with the sling being on one side of the rifle. I switched shoulders on occasion this allow me to do that much easier.
Good design(14.05.2011)
Great product. Works as specified, well design. Product fits out of the way and does not catch on clothing. Works well for both left and right handed shooters.
GREAT PRODUCT(27.06.2011)
Installed this on my AR and it beats most other designs for single point sling attachment. Dose not get hungup on clothing & Tactical Vest & other equipment when making forced entries (Yes I Am A Police Officer). The only modification you need to make to your stock is remove a small ammount of material where the adaptor rest against the stock if you wish to use the shortest setting on your 6 position stock. This I did with a Dremmil Tool In About 15 Secounds Very unnoticable. I recomend this item to all Law Enforcement Officers.
Strong sling mount, made in USA.(07.02.2012)
Very well built sling mount. Solid high strength steel, made in USA. Non-protrusive sling mount, nothing sticking out of the footprint of the gun. Accepts any sling hook or pin adapter. I use a mash hook and single point Viper sling. Very comfortable after hours of use. Works for lefties too. Highly recommended.
Works great, no snags(07.03.2012)
Does exactly what I needed without being noisy like the Magpul ASAP, and without messing with the lines of the rifle or snagging on clothing.
Low Profile Sling Adapter(13.07.2016)
This sling adapter works very well on my S&W M&P15 carbine. I bought it because other adapters or the sling would interfere with the back of my firing hand. This is low profile and is a good fit for my single-point sling.
Works perfect with B5 Bravo Stock(19.11.2017)
This is a rock solid single point sling adaptor end plate.
Both anti rotation areas which stabilize the buffer tube and the end plate itself are not added on, they are solid extensions of the plate.
Dimensions and tolerances are perfect.
As it is already stated, most of the buttstocks will not go down to the castle nut and lock to the first notch on the buffer tube, but the shorter buttstocks such as B5 Bravo buttstock work perfect with the loop. This con is the only reason keeping me giving five stars to this product.
And yes, I recommend it to whom are looking for a low profile, minimalist single point sling adaptor.
Artikel-Nr.: 100003181 CROSSTAC SINGLE-POINT SLING ADAPTER Herstellerproduktnummer: 135020-BLK852741000685 Die minimalistische Sling-Adapterplatte bietet eine sichere, beidhändige Befestigung für Einpunkt-Taktikgurte an Karabinern oder umgebauten Schrotflinten mit M4-Kollaps-Schulterstützen. Die Befestigungsschlaufe befindet sich unter der Empfänger-Erweiterungsmutter, außer Sichtweite, wo sie sich nicht an Kleidung, Ausrüstung, Gestrüpp oder dem Sling verfangen kann und nicht den Zugang zum Selektorschalter stört. Sie hilft, die Waffe flach an deinem Körper hängen zu lassen, wenn sie losgelassen wird, ermöglicht jedoch auch ein schnelles, sicheres Wiederergreifen, wenn nötig. Akzeptiert die meisten Sling-Haken, einschließlich MASH-Haken, H&K-Verbinder und ZM-Stil Verschlüsse. Passt zu M4-Typ Kollaps-Schulterstützen mit Mil-Spec und kommerziellen Buffer-Rohren, einschließlich Schrotflinten-Umbauten, die das M4-Rohr verwenden. Präzisionsbearbeitet aus hochwertigem Stahl, dann Parkerisiert in Dunkelgrau für Verschleißfestigkeit und eine enge Übereinstimmung mit den Werksfinishs von Gewehren.
38.9EUR10238,90 €
*
Lieferzeit ca. 14-21 Werktage. Mehr als 10 Stk. im Lager USA
Minimal profile sling adapter plate provides secure, ambidextrous attachment for single-point tactical slings on carbines or converted shotguns with M4 collapsible buttstocks. The attachment loop centers under the receiver extension nut, out of the way, where it can’t snag on clothing, gear, brush or the sling, and won’t interfere with access to the selector lever. Helps weapon hang flat against your body when released, yet also allows fast, positive re-grip when needed. Accepts most sling hooks, including MASH hooks, H&K connectors, and ZM-style clasps. Fits M4-type collapsible stocks with mil-spec and commercial buffer tubes, including shotgun conversions that use the M4 tube. Precision machined from high-quality steel, then Parkerized dark gray for wear resistance and a close match to factory rifle finishes.
SPECS: Steel, black, matte, Parkerized finish.
Mehr...
Ultra-niedriges Profil, snag-freies Design
Die minimalistische Sling-Adapterplatte bietet eine sichere, beidhändige Befestigung für Einpunkt-Taktikgurte an Karabinern oder umgebauten Schrotflinten mit M4-Kollaps-Schulterstützen. Die Befestigungsschlaufe befindet sich unter der Empfänger-Erweiterungsmutter, außer Sichtweite, wo sie sich nicht an Kleidung, Ausrüstung, Gestrüpp oder dem Sling verfangen kann und nicht den Zugang zum Selektorschalter stört. Sie hilft, die Waffe flach an deinem Körper hängen zu lassen, wenn sie losgelassen wird, ermöglicht jedoch auch ein schnelles, sicheres Wiederergreifen, wenn nötig. Akzeptiert die meisten Sling-Haken, einschließlich MASH-Haken, H&K-Verbinder und ZM-Stil Verschlüsse. Passt zu M4-Typ Kollaps-Schulterstützen mit Mil-Spec und kommerziellen Buffer-Rohren, einschließlich Schrotflinten-Umbauten, die das M4-Rohr verwenden. Präzisionsbearbeitet aus hochwertigem Stahl, dann Parkerisiert in Dunkelgrau für Verschleißfestigkeit und eine enge Übereinstimmung mit den Werksfinishs von Gewehren.
Kundenbewertungen zu CROSSTAC SINGLE-POINT SLING ADAPTER
Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 4,5
Minimul bulk, and gets the job done.(05.09.2009)
This thing is great. You don't have the bulk of loops sticking out near the charging handle and it's completely ambidextrous.
May not be able to use all 6 positions(06.09.2009)
I just built another carbine using this item with a 6-position mil-spec tube and Magpul MOE mil-spec stock. After install was done, I found the stock wouldn't go all the way forward as it hits against the sling connection point. I tried backing the tube out but it was already at the proper depth in order to engage the buffer retainer. 5 out of 6 positions on the stock isn't a huge deal for me personally but somebody else may feel shorted. I would only recommend this to another user if they are aware of the above limitations on stock positions. Does it work for a single point sling attachment? Yes.
Great No-snag design(25.11.2010)
Installed this on 2 of my 5 ARs and it beats most other designs for single point sling attachment. The ones with eyelets off to the side get hung up on your vest and clothing and ruin the sleek lines of your rifle. The only modification you need to make to your stock is remove a very small ammount of material if you wish to use the shortest setting on your 6 position stock. Very unnoticable.
Like it(16.02.2011)
With the exception already mentioned of not being able to collaspe the stock all the way I like this better. You're not stuck with the sling being on one side of the rifle. I switched shoulders on occasion this allow me to do that much easier.
Good design(14.05.2011)
Great product. Works as specified, well design. Product fits out of the way and does not catch on clothing. Works well for both left and right handed shooters.
GREAT PRODUCT(27.06.2011)
Installed this on my AR and it beats most other designs for single point sling attachment. Dose not get hungup on clothing & Tactical Vest & other equipment when making forced entries (Yes I Am A Police Officer). The only modification you need to make to your stock is remove a small ammount of material where the adaptor rest against the stock if you wish to use the shortest setting on your 6 position stock. This I did with a Dremmil Tool In About 15 Secounds Very unnoticable. I recomend this item to all Law Enforcement Officers.
Strong sling mount, made in USA.(07.02.2012)
Very well built sling mount. Solid high strength steel, made in USA. Non-protrusive sling mount, nothing sticking out of the footprint of the gun. Accepts any sling hook or pin adapter. I use a mash hook and single point Viper sling. Very comfortable after hours of use. Works for lefties too. Highly recommended.
Works great, no snags(07.03.2012)
Does exactly what I needed without being noisy like the Magpul ASAP, and without messing with the lines of the rifle or snagging on clothing.
Low Profile Sling Adapter(13.07.2016)
This sling adapter works very well on my S&W M&P15 carbine. I bought it because other adapters or the sling would interfere with the back of my firing hand. This is low profile and is a good fit for my single-point sling.
Works perfect with B5 Bravo Stock(19.11.2017)
This is a rock solid single point sling adaptor end plate.
Both anti rotation areas which stabilize the buffer tube and the end plate itself are not added on, they are solid extensions of the plate.
Dimensions and tolerances are perfect.
As it is already stated, most of the buttstocks will not go down to the castle nut and lock to the first notch on the buffer tube, but the shorter buttstocks such as B5 Bravo buttstock work perfect with the loop. This con is the only reason keeping me giving five stars to this product.
And yes, I recommend it to whom are looking for a low profile, minimalist single point sling adaptor.