Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versandkostenfreie Lieferung ab 299,-€

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

GRACE USA
BRASS PUNCH SET

731940223180 354100125

Non-Marring, Precision-Machined To Fit Common Pin Sizes

For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Punch Set includes 8 flathead, long shaft punches for driving pins completely out.

SPECS: Brass, 5⁄16" (7.9mm) hex stock. Punch Set - 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ¼ , 5⁄16" dia.

Mehr...

Kratzerfrei, Präzisionsbearbeitet, um gängige Stiftgrößen zu passen

Für das Versetzen von Visierungen, das Eintreiben von Stiften oder das Anpassen von Teilen, wenn das Markieren oder Kratzen der Oberfläche den Unterschied zwischen einer gut gemachten Arbeit und einer Katastrophe ausmachen kann. Aus hochwertigem Messing-Sechskant gefertigt. Das Punch Set umfasst 8 Flachkopfstempel mit langem Schaft zum vollständigen Herausdrücken von Stiften.

SPECS: Messing, 5⁄16" (7.9mm) Sechskant. Punch Set - 8 Stempel: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ¼ , 5⁄16" Durchmesser.

Mehr...

Kundenbewertungen zu GRACE USA 1/8" (3.2MM) BRASS PIN PUNCH

Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4

Excellent Value (16.11.2009)

These are super. I have several sets of the cheaper imported brass punches. The quality of these "Made in USA" punches blew me away. Not only are they nicely finished, they are a joy to use. Also included is a nice pouch so they don't end up scattered in your tool box or on the bench. I would buy these again and would recommend them to a friend.

Much nicer than the "plastic box" sets (27.12.2009)

These are great for gentle removal of pins from historic or surface critical items. The brass is still pretty soft, and bending is possible without care, but the punch is tapered from full diameter down to the pin punch size. The pin punch size is not the full length of the punch, which is good to add strength since the punch is the strike end length for much of the punch, but if it's a long pin, you might have to resort to another punch/method to fully drive the pin all the way the length of the pin.

Comments on the PSA-8 Grass Brass Punch (06.12.2012)

It didn't take long after receiving this items to know I had ordered a very professional punch set and not some piece of junk that would probably fall apart after first use. Having the different sizes which are tailored for hand guns and rifles roll pins would give anyone the capabilities to take down your weapons with ease. Having eight different sizes will definitely afford not having to order a special individual punch. I have already used this item and I can attest to it's usefulness in it's ability to push out roll pins. Each punch is clearly marked to its size and the roll-up kit that holds each in a separate slot. If you're in the market for a good punch set then look no further.

Bends easily, VERY soft (26.03.2013)

I bought these to replace an existing set of brass punches that have had years of use. Upon first use, I bent 2 of these punches with a light blow of a 6 oz nylon hammer to remove handgun pins. Couldn't believe how easy it was to bend them. Even the larger brass punches easily flair and bend at the head.

Good Punch Set (04.09.2014)

I have installed and/or adjusted several dovetailed sights with these and also installed a Majestic Arms quick strip kit and they will continue to get new tasks. Of course they're not as tough as steel punches, but they're my choice for preserving metal while still transferring plenty of a blow; just be careful on the smaller punches (not that steel doesn't bend too). Since they're brass they're also pretty easy to re-shape or cut if the tip does become damaged. The little plastic roll is handy, but sometimes the small punch on the end tries to escape; just watch them if you're working outdoors.

Lesen Sie 5 weitere Bewertungen bei brownells.com

16.9 64.9 9 EUR

Artikel-Nr.: 354100125
GRACE USA 1/8" (3.2MM) BRASS PIN PUNCH
Herstellerproduktnummer: 18BPP 731940223180 Für das Versetzen von Visierungen, das Eintreiben von Stiften oder das Anpassen von Teilen, wenn das Markieren oder Kratzen der Oberfläche den Unterschied zwischen einer gut gemachten Arbeit und einer Katastrophe ausmachen kann. Aus hochwertigem Messing-Sechskant gefertigt. Das Punch Set umfasst 8 Flachkopfstempel mit langem Schaft zum vollständigen Herausdrücken von Stiften.

16.9 EUR 0 16,90 € *

Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.

Eigenschaften: Material: Brass Size: 1/8 in Style: Grace Menge: 1

GRACE USA BRASS PUNCH SET

Kundenbewertungen zu GRACE USA 1/8" (3.2MM) BRASS PIN PUNCH

Top Takeaways

Eigenschaften

Verantwortlicher Wirtschaftsakteur gemäß EU-Verordnung

Kundenbewertungen zu GRACE USA 1/8" (3.2MM) BRASS PIN PUNCH

Vernetzen

Sichere Bezahlmethoden

Berufsverbände

Willkommen!

GRACE USA
BRASS PUNCH SET