Rugged, Drop-In Replacement For M4-Style Factory Handguard
Snap-on USGI-type replacement for your carbine’s factory-original handguard is made of tough, fiberglass-reinforced, injection-molded polymer that delivers superior impact and abrasion resistance. The ridged gripping surface and top/bottom vent holes retain the weapon’s authentic military look, while an internal heat shield of lightweight aluminum protects your hand from barrel heat. Skinny models have standard-issue single-layer heat shield on upper and lower handguard. Skinny M4 model has narrower diameter for operators who prefer a minimal bulk handguard. Fits AR-15/M16/M4 with carbine-length gas system.
SPECS: Fiberglass-reinforced polymer, matte black. 6½” (16.5cm) long. Skinny – Approx. 2¼” O.D. at rear tapering to 2” (5.1cm) O.D. at front. Single heat shield only.
Mehr...
Robuste, einfach einsetzbare Ersatzlösung für M4-Style Werks-Handguard
Der Snap-on USGI-Typ Ersatz für den originalen Handguard deiner Karabiner ist aus robustem, fiberglasverstärktem, spritzgegossenem Polymer gefertigt, das hervorragende Schlag- und Abriebfestigkeit bietet. Die geriffelte Griffoberfläche und die Belüftungsöffnungen oben/unten bewahren das authentische militärische Aussehen der Waffe, während eine interne Wärmeabschirmung aus leichtem Aluminium deine Hand vor der Hitze des Laufs schützt. Skinny-Modelle haben eine standardmäßige einlagige Wärmeabschirmung an der oberen und unteren Handguard. Das Skinny M4-Modell hat einen schmaleren Durchmesser für Bediener, die einen minimalen Handguard bevorzugen. Passt auf AR-15/M16/M4 mit Karabinergas-System.
SPECS: Fiberglas-verstärkter Polymer, matt schwarz. 6½” (16,5 cm) lang. Skinny – Ca. 2¼” O.D. hinten, verjüngt auf 2” (5,1 cm) O.D. vorne. Nur eine Wärmeabschirmung.
Mehr...
Kundenbewertungen zu DOUBLE STAR SKINNY M4 CARBINE HANDGUARD
Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 5
I would buy these again(11.05.2013)
Good Quality,color matched my rifle perfect,fit with no triming,I would buy these again and recomend them to customers
Highly Recommended(05.07.2013)
Simple - it fits, it looks good, it feels good and the price can't be beat !!! Thanks Brownells
For a better small hand fit(28.05.2014)
These grips are perfect for people like me that have smaller hands The feel is just right. They come in handy for younger shooters too who feel more comfortable being able to wrap more of their hands around them. They really do give better control. Have them on all of my AR style rifles. Lastly, they go on real easy.
Great handguards(21.04.2015)
Used these to replace the factory handguards on my Ruger AR-556 so I could add a rail and foregrip. Worked great and looks nice, too. Very happy!
Excellent replacement for oversized, double-heatshield handguards now used on Colt CAR-15s. These are a near perfect match for the original slim handguards that used to come standard on Colt CAR rifles. They are much easier to grip than the larger style. Great quality.
Great product but does not fit Bushmaste(03.11.2015)
I noted that one of the reviewers talked bout fitness issue for Bushmaster. But, I still placed order and received the product within only 3 business days. Fast delivery, great quality, beautiful appearance, it does not fit Bushmaster directly on the large end. But, it is not a big deal. I spent only one hour with basic hand tools modifying the lip structure slightly. Then, it fitted in almost perfectly without any noticeable issue. Satisfied completely. I am very handy, but I still believe anybody can get the project done with maybe a little longer time.
Excellent - will buy again(20.07.2016)
Tight, solid fit. Seams line up perfectly. Doesn't flex, move or give when handled. I purchased one because I needed it. After that I purchased two more just to replace a couple of cheapy ones I was using. Highly recommend, excellent. I'm going to keep my eye on this brand as I look for other items.
Great Handguard, with a little fitting(28.06.2017)
Had to sand down ever so slightly the end that went into the delta ring. After install, was good snug fit. Looks great on my two LMTs
Worth Much More !(18.06.2018)
I have a PSA A4 upper that came with PSA's hand guards which are odd at best. They are oval in shape, not round, and are quite large (fat). I ordered these skinny hand guards, but to be honest I wasn't expecting much due to the low cost. I'm glad I took the chance because they popped on with zero issues or difficulty. They seem quite well made, no squeak/wiggle etc. I plan on ordering another pair to keep on the shelf for a future build.
Great and unbelievable low price(04.07.2018)
Never put one on before. Had top rotated a little and didn't notice. Seemed to fit about 95% but after looking at it, a slight 1/16" twist let it lock into place perfectly. Looks great on my Colt 6720 and if you didn't have my 6721 or Lightweight Sporter there beside it, you'd not notice any difference from OEM. Way better than the double heat shield stock unit.
Artikel-Nr.: 100004515 DOUBLE STAR SKINNY M4 CARBINE HANDGUARD Herstellerproduktnummer: AR414841348100201 Der Snap-on USGI-Typ Ersatz für den originalen Handguard deiner Karabiner ist aus robustem, fiberglasverstärktem, spritzgegossenem Polymer gefertigt, das hervorragende Schlag- und Abriebfestigkeit bietet. Die geriffelte Griffoberfläche und die Belüftungsöffnungen oben/unten bewahren das authentische militärische Aussehen der Waffe, während eine interne Wärmeabschirmung aus leichtem Aluminium deine Hand vor der Hitze des Laufs schützt. Skinny-Modelle haben eine standardmäßige einlagige Wärmeabschirmung an der oberen und unteren Handguard. Das Skinny M4-Modell hat einen schmaleren Durchmesser für Bediener, die einen minimalen Handguard bevorzugen. Passt auf AR-15/M16/M4 mit Karabinergas-System.
22.9EUR12022,90 €
*
Lieferzeit ca. 14-21 Werktage. Mehr als 10 Stk. im Lager USA
US-Exportklassifizierung: 0A501.y.1
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Rugged, Drop-In Replacement For M4-Style Factory Handguard
Snap-on USGI-type replacement for your carbine’s factory-original handguard is made of tough, fiberglass-reinforced, injection-molded polymer that delivers superior impact and abrasion resistance. The ridged gripping surface and top/bottom vent holes retain the weapon’s authentic military look, while an internal heat shield of lightweight aluminum protects your hand from barrel heat. Skinny models have standard-issue single-layer heat shield on upper and lower handguard. Skinny M4 model has narrower diameter for operators who prefer a minimal bulk handguard. Fits AR-15/M16/M4 with carbine-length gas system.
SPECS: Fiberglass-reinforced polymer, matte black. 6½” (16.5cm) long. Skinny – Approx. 2¼” O.D. at rear tapering to 2” (5.1cm) O.D. at front. Single heat shield only.
Mehr...
Robuste, einfach einsetzbare Ersatzlösung für M4-Style Werks-Handguard
Der Snap-on USGI-Typ Ersatz für den originalen Handguard deiner Karabiner ist aus robustem, fiberglasverstärktem, spritzgegossenem Polymer gefertigt, das hervorragende Schlag- und Abriebfestigkeit bietet. Die geriffelte Griffoberfläche und die Belüftungsöffnungen oben/unten bewahren das authentische militärische Aussehen der Waffe, während eine interne Wärmeabschirmung aus leichtem Aluminium deine Hand vor der Hitze des Laufs schützt. Skinny-Modelle haben eine standardmäßige einlagige Wärmeabschirmung an der oberen und unteren Handguard. Das Skinny M4-Modell hat einen schmaleren Durchmesser für Bediener, die einen minimalen Handguard bevorzugen. Passt auf AR-15/M16/M4 mit Karabinergas-System.
SPECS: Fiberglas-verstärkter Polymer, matt schwarz. 6½” (16,5 cm) lang. Skinny – Ca. 2¼” O.D. hinten, verjüngt auf 2” (5,1 cm) O.D. vorne. Nur eine Wärmeabschirmung.
Mehr...
Kundenbewertungen zu DOUBLE STAR SKINNY M4 CARBINE HANDGUARD
Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 5
I would buy these again(11.05.2013)
Good Quality,color matched my rifle perfect,fit with no triming,I would buy these again and recomend them to customers
Highly Recommended(05.07.2013)
Simple - it fits, it looks good, it feels good and the price can't be beat !!! Thanks Brownells
For a better small hand fit(28.05.2014)
These grips are perfect for people like me that have smaller hands The feel is just right. They come in handy for younger shooters too who feel more comfortable being able to wrap more of their hands around them. They really do give better control. Have them on all of my AR style rifles. Lastly, they go on real easy.
Great handguards(21.04.2015)
Used these to replace the factory handguards on my Ruger AR-556 so I could add a rail and foregrip. Worked great and looks nice, too. Very happy!
Excellent replacement for oversized, double-heatshield handguards now used on Colt CAR-15s. These are a near perfect match for the original slim handguards that used to come standard on Colt CAR rifles. They are much easier to grip than the larger style. Great quality.
Great product but does not fit Bushmaste(03.11.2015)
I noted that one of the reviewers talked bout fitness issue for Bushmaster. But, I still placed order and received the product within only 3 business days. Fast delivery, great quality, beautiful appearance, it does not fit Bushmaster directly on the large end. But, it is not a big deal. I spent only one hour with basic hand tools modifying the lip structure slightly. Then, it fitted in almost perfectly without any noticeable issue. Satisfied completely. I am very handy, but I still believe anybody can get the project done with maybe a little longer time.
Excellent - will buy again(20.07.2016)
Tight, solid fit. Seams line up perfectly. Doesn't flex, move or give when handled. I purchased one because I needed it. After that I purchased two more just to replace a couple of cheapy ones I was using. Highly recommend, excellent. I'm going to keep my eye on this brand as I look for other items.
Great Handguard, with a little fitting(28.06.2017)
Had to sand down ever so slightly the end that went into the delta ring. After install, was good snug fit. Looks great on my two LMTs
Worth Much More !(18.06.2018)
I have a PSA A4 upper that came with PSA's hand guards which are odd at best. They are oval in shape, not round, and are quite large (fat). I ordered these skinny hand guards, but to be honest I wasn't expecting much due to the low cost. I'm glad I took the chance because they popped on with zero issues or difficulty. They seem quite well made, no squeak/wiggle etc. I plan on ordering another pair to keep on the shelf for a future build.
Great and unbelievable low price(04.07.2018)
Never put one on before. Had top rotated a little and didn't notice. Seemed to fit about 95% but after looking at it, a slight 1/16" twist let it lock into place perfectly. Looks great on my Colt 6720 and if you didn't have my 6721 or Lightweight Sporter there beside it, you'd not notice any difference from OEM. Way better than the double heat shield stock unit.