Über 300.000 Kunden - wir sagen Danke!

40,000+ Produkte aus Jagd und Schiesssport

Verbessere deine Abzugsfunktion mit dem AR-15/M16 Trigger Function Pak von WOLFF! ⚙️ Ideal für AR15, M16 und M4 Varianten.

WOLFF AR-15/M16 TRIGGER FUNCTION PAK - WOLFF AR15/M16 TRIGGER FUNCTION PAK

969000244

Eigenschaften

  • Waffentyp: AR-15
  • Versandgewicht: 0,014kg
  • Versandhöhe: 5mm
  • Versandbreite: 94mm
  • Versandlänge: 175mm
  • Spezifikationen:
  • Marke: AR-15
22.9 22.9 1 EUR
Sale
20.6 EUR 20,60 € 22,90 €

Preise inkl. MwSt., zzgl. Versand

Artikel-Nr.: 969000244

Herst.-Nr.: 34910

Enthält eine reduzierte Kraft Abzugfeder und eine Disconnector-Feder. Entwickelt, um die Abzugsfunktion zu erleichtern und zu verbessern. Für die Verwendung in AR15, M16, M4 und Varianten.
Auf Lager
1
2
3
4
5
6
7
8
9
10+
  • Spezifikationen:
  • Marke: AR-15

Beschreibung:

Original anzeigen (Englisch)
Enthält eine reduzierte Kraft Abzugfeder und eine Disconnector-Feder. Entwickelt, um die Abzugsfunktion zu erleichtern und zu verbessern. Für die Verwendung in AR15, M16, M4 und Varianten.

Eigenschaften

  • Waffentyp: AR-15
  • Versandgewicht: 0,014kg
  • Versandhöhe: 5mm
  • Versandbreite: 94mm
  • Versandlänge: 175mm

Kundenbewertungen

Kundenbewertungen (4)

3 / 5
Sehr empfehlenswert

Brownells USA Good bang for the buck 02.07.2017

Have used these on a few lowers. I start out with a Critical Capabilities LPK with ELG trigger. Pull weight is reduced and with some polishing on the trigger and hammer engagement surfaces I was able to get a very nice smooth pull between 4.5 and 6 lbs, (avg 5.25 lbs) with no loss of reliability on hard primers.,

Nicht empfehlenswert

Brownells USA Save the money 06.05.2017

I have used a lot of Wolff springs, but always in cowboy shooting guns. Some made a lot of difference, some a little, while others could be made equally well with original parts and some tuning.



This is one case to just save your money, as little as they cost to begin with. Actually, save yourself the aggravation of R&R the hammer spring just to get to this.



I took seven readings before doing a thing. They varied from7.5 to 6.75 lbs of pull; mostly 7.5. After going through the whole mess, then lubing everything again, I got the same readings. Mostly 7.5 lbs. What a disappointment!!



The worst part of it all is that this was replacing a spring out of a DPMS lower parts kit, so pretty bottom of the barrel to begin with.



OTOH, the included disconnector spring seems to tighter. It is definitely a little shorter though; not by much.

Schon gewusst?

Herstellerinformationen

Verantwortlicher Wirtschaftsakteur gemäß EU-Verordnung

Brownells Austria GmbH
Hauptstraße 13-15
2332 Hennersdorf
Österreich
info@brownells.at

Ups! Da ist etwas schiefgelaufen.

Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.

Zurück nach oben