Securely Clamps Two PMAGs For Fast Reloads In Combat Or Competition
Lightweight, low-profile clamping system attaches the backup magazine directly to the one in the gun for ultra-fast reloads. Holds two 20- or 30-round Magpul PMAGs side-by-side, with a tension-adjustable coupling that prevents the spare magazine from shifting. Precision-machined from billet aluminum with minimal bulk and smooth, radiused edges that won't abrade the hand. Rugged and reliable enough for tactical and competition use.
SPECS: Tempered aluminum, hardcoat anodized, matte black. Fits all models of 20- and 30-round .223/5.56mm Magpul PMAGs.
Mehr...
Klemmt zwei PMAGs sicher für schnelles Nachladen im Einsatz oder Wettkampf
Leichtes, flaches Klemm-System befestigt das Ersatzmagazin direkt an dem im Gewehr für ultraschnelle Nachladevorgänge. Hält zwei 20- oder 30-Schuss Magpul PMAGs nebeneinander, mit einer spannungsjustierbaren Verbindung, die verhindert, dass das Ersatzmagazin verrutscht. Präzisionsbearbeitet aus Billet-Aluminium mit minimalem Volumen und glatten, abgerundeten Kanten, die die Hand nicht scheuern. Robust und zuverlässig genug für taktische Einsätze und Wettbewerbe.
SPECS: Gehärtetes Aluminium, harteloxiert, matt schwarz. Passt auf alle Modelle von 20- und 30-Schuss .223/5.56mm Magpul PMAGs.
Mehr...
Kundenbewertungen zu MERCOB SECURITY GROUP. PMAG MAG GRIP
Anzahl der Bewertungen: 11
Von brownells.com: 11
Durchschnittliche Bewertung: 4,9
PMAG MAG GRIP(17.04.2010)
ALL,
This product is by far the best on the market. I know I have used it in theater and also back here at home. It works!
MGySGt Elliott
Exactly what you need it to be(20.07.2011)
Use this for recreational shooting. It's easy to use and keeps a secure hold. Not to mention it looks a lot prettier than most other couplers out there.
A solid, well-made unit(01.09.2011)
I have been using magazine couplers for only a few months now after decades of shooting and this is the second type I tried. Having 60 rounds of ammunition available in one unit can be a definite advantage to the competitor, law enforcement officer, or for defensive purposes.
I was concerned about the narrow contact area of the Mercob unit, but because of the precise fit of the clamps to the magazines, it produces a very solid, sturdy combination.
The advantages of the Mercob device over the other coupler I reviewed here are that it can be attached at any point on the mags, including far enough down to carry with one mag inside a pocket and one out; the magazines can be staggered as desired, and although I don't recommend it, they can even be positioned with one up and the other down; the base plates are accessible for easy removal; the clamp adds very little bulk or weight; and the overall width of the combination is only slightly greater than two mags side by side. (The only disadvantage to the narrow configuration is that a LULA magazine loader can be used with only one magazine, but that is a minor inconvenience.)
I will be buying more Mercob couplers in the future.
Quality, functional device.(08.09.2011)
I use this item for my competition rifle, and my patrol rifle. Despite the simple design, the coupler works very well. It is light-weigh, unobtrusive, and holds the mags securely due to aluminum construction. Installation is relatively simple, too, although you do need to wiggle the mags a bit while tightening the coupler in order to make sure that they seat all of the way.
If you are one of those who is concerned with keeping your gear looking factory new, note that these will pick up dings if you drop them on rocks or concrete.
Works like a champ!(06.10.2011)
This is the only mag coupler I'll ever try for my PMAGS. Holds 'em tight, doesn't loosen under sustained fire and also doesn't mar or damage mags. Very well-made from aluminum and built to last forever. Added bonus? They just look cool compared to other products out there. Thanks again Brownells!!!
Would never use any other mag coupler(16.02.2012)
This is a very well made product. It has a slim un-obtrusive design which is awesome. This thing was made exactly for the dimensions of the PMag, fits like a perfectly CNC machined glove! There is no wobble at all and holds the two mags very tight. I was somewhat reluctant to try it because of the price tag but it was money well spent.
A Must Have(24.05.2012)
So simple, but very effective. It holds two 30-rd PMAGS with zero problems. The mag holder has been put through some rough training sessions and there has been no give in its sturdiness. It's rock solid. I am a left-handed shooter using right-handed weapons. Prior to having the mag holder, doing a tactical mag exchange was very difficult if not impossible under stress. Now that I have this attached to my mags, I can do a tactical mag exchange with ease and with extreme speed. I've seen other PMAG holders which just did not appeal to me due to poor construction. This had good reviews so I took the plunge. I should have purchased this sooner.
Lives up to it's Rep.(10.02.2013)
works great,not big or bulky.
Best mag coupler made(15.06.2013)
If you're running Pmags this is the best mag holder I've tried. Holds Pmags solidly together without bulk and won't loosen over time.
Well Made. Secure. Not for 20s(14.07.2015)
This product securely couples two 30rd Pmags. Its well made. Solid. It will couple two 20 round curved Pmags but when changing to the second mag the first will hit the ejection port cover. You can't off set them enough since they are short. Works great for two 30 round Pmags. Will couple a 20rd with a 30rd so you still get the benefit of a shorter 20rd mag for prone shooting, until you switch over to the 30rd that is.
dont recomend reading this(25.07.2018)
coupled 2 mags togeather .one s &w 15/22 (lr) and one p-mag 30 to get the look of a 556 on the 22 lr (from one side olny)
-had 2 grind some alluminimun away as the s&w 22lr mags are fatter at the front than the p-mag,,much like the classic steel mags
-you can order 2 as use the 2 back pieces (plus one nut from RONA)to coulple 2 steel or 2 s&w 22lr mags
Artikel-Nr.: 100004542 MERCOB SECURITY GROUP. PMAG MAG GRIP Herstellerproduktnummer: 100041671853706001099 Leichtes, flaches Klemm-System befestigt das Ersatzmagazin direkt an dem im Gewehr für ultraschnelle Nachladevorgänge. Hält zwei 20- oder 30-Schuss Magpul PMAGs nebeneinander, mit einer spannungsjustierbaren Verbindung, die verhindert, dass das Ersatzmagazin verrutscht. Präzisionsbearbeitet aus Billet-Aluminium mit minimalem Volumen und glatten, abgerundeten Kanten, die die Hand nicht scheuern. Robust und zuverlässig genug für taktische Einsätze und Wettbewerbe.
US-Exportklassifizierung: 0A501.x
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Securely Clamps Two PMAGs For Fast Reloads In Combat Or Competition
Lightweight, low-profile clamping system attaches the backup magazine directly to the one in the gun for ultra-fast reloads. Holds two 20- or 30-round Magpul PMAGs side-by-side, with a tension-adjustable coupling that prevents the spare magazine from shifting. Precision-machined from billet aluminum with minimal bulk and smooth, radiused edges that won't abrade the hand. Rugged and reliable enough for tactical and competition use.
SPECS: Tempered aluminum, hardcoat anodized, matte black. Fits all models of 20- and 30-round .223/5.56mm Magpul PMAGs.
Mehr...
Klemmt zwei PMAGs sicher für schnelles Nachladen im Einsatz oder Wettkampf
Leichtes, flaches Klemm-System befestigt das Ersatzmagazin direkt an dem im Gewehr für ultraschnelle Nachladevorgänge. Hält zwei 20- oder 30-Schuss Magpul PMAGs nebeneinander, mit einer spannungsjustierbaren Verbindung, die verhindert, dass das Ersatzmagazin verrutscht. Präzisionsbearbeitet aus Billet-Aluminium mit minimalem Volumen und glatten, abgerundeten Kanten, die die Hand nicht scheuern. Robust und zuverlässig genug für taktische Einsätze und Wettbewerbe.
SPECS: Gehärtetes Aluminium, harteloxiert, matt schwarz. Passt auf alle Modelle von 20- und 30-Schuss .223/5.56mm Magpul PMAGs.
Mehr...
Kundenbewertungen zu MERCOB SECURITY GROUP. PMAG MAG GRIP
Anzahl der Bewertungen: 11
Von brownells.com: 11
Durchschnittliche Bewertung: 4,9
PMAG MAG GRIP(17.04.2010)
ALL,
This product is by far the best on the market. I know I have used it in theater and also back here at home. It works!
MGySGt Elliott
Exactly what you need it to be(20.07.2011)
Use this for recreational shooting. It's easy to use and keeps a secure hold. Not to mention it looks a lot prettier than most other couplers out there.
A solid, well-made unit(01.09.2011)
I have been using magazine couplers for only a few months now after decades of shooting and this is the second type I tried. Having 60 rounds of ammunition available in one unit can be a definite advantage to the competitor, law enforcement officer, or for defensive purposes.
I was concerned about the narrow contact area of the Mercob unit, but because of the precise fit of the clamps to the magazines, it produces a very solid, sturdy combination.
The advantages of the Mercob device over the other coupler I reviewed here are that it can be attached at any point on the mags, including far enough down to carry with one mag inside a pocket and one out; the magazines can be staggered as desired, and although I don't recommend it, they can even be positioned with one up and the other down; the base plates are accessible for easy removal; the clamp adds very little bulk or weight; and the overall width of the combination is only slightly greater than two mags side by side. (The only disadvantage to the narrow configuration is that a LULA magazine loader can be used with only one magazine, but that is a minor inconvenience.)
I will be buying more Mercob couplers in the future.
Quality, functional device.(08.09.2011)
I use this item for my competition rifle, and my patrol rifle. Despite the simple design, the coupler works very well. It is light-weigh, unobtrusive, and holds the mags securely due to aluminum construction. Installation is relatively simple, too, although you do need to wiggle the mags a bit while tightening the coupler in order to make sure that they seat all of the way.
If you are one of those who is concerned with keeping your gear looking factory new, note that these will pick up dings if you drop them on rocks or concrete.
Works like a champ!(06.10.2011)
This is the only mag coupler I'll ever try for my PMAGS. Holds 'em tight, doesn't loosen under sustained fire and also doesn't mar or damage mags. Very well-made from aluminum and built to last forever. Added bonus? They just look cool compared to other products out there. Thanks again Brownells!!!
Would never use any other mag coupler(16.02.2012)
This is a very well made product. It has a slim un-obtrusive design which is awesome. This thing was made exactly for the dimensions of the PMag, fits like a perfectly CNC machined glove! There is no wobble at all and holds the two mags very tight. I was somewhat reluctant to try it because of the price tag but it was money well spent.
A Must Have(24.05.2012)
So simple, but very effective. It holds two 30-rd PMAGS with zero problems. The mag holder has been put through some rough training sessions and there has been no give in its sturdiness. It's rock solid. I am a left-handed shooter using right-handed weapons. Prior to having the mag holder, doing a tactical mag exchange was very difficult if not impossible under stress. Now that I have this attached to my mags, I can do a tactical mag exchange with ease and with extreme speed. I've seen other PMAG holders which just did not appeal to me due to poor construction. This had good reviews so I took the plunge. I should have purchased this sooner.
Lives up to it's Rep.(10.02.2013)
works great,not big or bulky.
Best mag coupler made(15.06.2013)
If you're running Pmags this is the best mag holder I've tried. Holds Pmags solidly together without bulk and won't loosen over time.
Well Made. Secure. Not for 20s(14.07.2015)
This product securely couples two 30rd Pmags. Its well made. Solid. It will couple two 20 round curved Pmags but when changing to the second mag the first will hit the ejection port cover. You can't off set them enough since they are short. Works great for two 30 round Pmags. Will couple a 20rd with a 30rd so you still get the benefit of a shorter 20rd mag for prone shooting, until you switch over to the 30rd that is.
dont recomend reading this(25.07.2018)
coupled 2 mags togeather .one s &w 15/22 (lr) and one p-mag 30 to get the look of a 556 on the 22 lr (from one side olny)
-had 2 grind some alluminimun away as the s&w 22lr mags are fatter at the front than the p-mag,,much like the classic steel mags
-you can order 2 as use the 2 back pieces (plus one nut from RONA)to coulple 2 steel or 2 s&w 22lr mags
Hilfe und Kontakt
(0) 
Newsletter
Klassische Ansicht
Mobile Ansicht