Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versandkostenfreie Lieferung ab 299,-€

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

YANKEE HILL MACHINE CO., INC.
AR-15/M16 MINI RISER ASSEMBLY

100002858

Adds Extra 1/2" Elevation For Small Accessories

Compact, Picatinny mini-riser is perfect for raising lasers, lights, sights, and other essential accessories that need a little extra lift or clearance. Constructed of aircraft-grade aluminum and hardcoat anodized for durability and long-lasting resistance to surface wear. Milled out center slot reduces weight. Fits Picatinny rail systems; two cap screws clamp riser securely to rail.

SPECS: Aluminum, hardcoat anodized, black. 15⁄16 (3.3cm) long, 1¼ (3.1cm) wide, Adds ½" of height measured from top of rail to top of riser. 1.1 oz. (31g) weight.

Mehr...

Fügt zusätzliche ½" Höhe für kleine Zubehörteile hinzu

Der kompakte Picatinny Mini-Riser ist perfekt, um Laser, Lichter, Visierungen und andere wichtige Zubehörteile etwas höher oder mit mehr Platz zu positionieren. Hergestellt aus Aluminium in Flugzeugqualität und harteloxiert für Langlebigkeit und langanhaltenden Schutz vor Oberflächenabnutzung. Die gefräste Mittelschnittstelle reduziert das Gewicht. Passt auf Picatinny-Schienensysteme; zwei Schrauben klemmen den Riser sicher an der Schiene fest.

TECHNISCHE DATEN: Aluminium, harteloxiert, schwarz. 15⁄16 (3,3 cm) lang, 1¼ (3,1 cm) breit, Fügt ½" Höhe hinzu, gemessen von der Oberkante der Schiene zur Oberkante des Risers. 1,1 oz. (31 g) Gewicht.

Mehr...

Kundenbewertungen zu YANKEE HILL MACHINE CO., INC. MINI RISER ASSEMBLY

Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 4,3

Excellent product (01.07.2009)

I mounted a SigSauer mini-red dot sight on a flat top AR15 upper receiver. I needed a simple, but effective, riser to get the red dot sight elevated to the proper height to co-witness with the BUIS I have on the upper. This riser is perfectly made and looks very durable. It lifted the red dot sight to the ideal height for a good cheek weld on the collapsible stock I have installed and it co-witnessed perfectly with the BUIS. As a side note, I have a Yankee Hill free-float hand guard installed on this same AR15. The hand guard is also a quality product that functions very well and looks good.

Great Little Part (01.11.2009)

If you need to raise your mount, it doesn't get much better!

Yankee Hill Mini Riser Assy (08.04.2010)

I use this to support my Aimpoint on my M&P 15-22. Beware, it is a one-piece unit in that I was not able to loosen it enough to slide it onto the rail from the side but had to slip it on from the rear. If you don't have access to either end of the rail, good luck. Once on, it clamps tightly, is well made and does the job. Made by Yankee Hill who seem to use this one-piece clamping design.

best mini riser (01.05.2010)

With most tube type red dot sights these risers lift the dot up enough to lie slightly above the line of the irons. With the mini dots all the rage, it takes two of these risers, one atop the other, to bring the tiny sight to the perfect height. The mini riser is very solid as to make my Bushnell mini dot feel like it's welded to the receiver.

Exactly what I needed (26.10.2011)

I bought an eotech xps3-2 for an ar15 .308. Unfortunately, the addition of the quick detach lever assembly, the sight is about half an inch higher than the old design which pretty much made my back up sights useless. Rather than return it or strip the eotech off of my .223, I used these to raise my sights half an inch. While it probably negated any weight shed from the smaller eotech design, it does what I need it to. And while I really don't care much for how my rifle looks, these blend right into the build. They install in seconds and I could probably do it one handed, upside down in the dark. Very easy.

Loose as a goose! (20.02.2012)

Zero stars would be better. I bought this and installed it on my tactical 22 to raise my red dot to a similar plane as the BUIS. It would not mount tightly. Tried it on my AR and three other rails, all different brands. Loose on all of them. Took it to the gun store for kicks. Tried it on several rails there. All loose. I can't believe that every rail I tried this on is off, so this Yankee Hill must be. Some of you may be thinking that the only constant in all of those trials was me...maybe my error or I don't know what I am doing. Right? Well, I let 3 other people try it. At least one of those is active duty US military. Same LOOSE results. Mine is going back. I hope they chunk it or else one of you may end up with this dud.

Great low-cost adaptability (02.11.2013)

I used a pair of these to go between a two piece mount and Weaver see-thru rings on my Rem. 742 so I could use a large objective 15 power scope and also be able to use the iron sights. According to my bore sighter this should be great. I can see these will have many uses.

Lesen Sie 7 weitere Bewertungen bei brownells.com

33.9 33.9 1 EUR

Artikel-Nr.: 100002858
YANKEE HILL MACHINE CO., INC. MINI RISER ASSEMBLY
Herstellerproduktnummer: YHM-226 Der kompakte Picatinny Mini-Riser ist perfekt, um Laser, Lichter, Visierungen und andere wichtige Zubehörteile etwas höher oder mit mehr Platz zu positionieren. Hergestellt aus Aluminium in Flugzeugqualität und harteloxiert für Langlebigkeit und langanhaltenden Schutz vor Oberflächenabnutzung. Die gefräste Mittelschnittstelle reduziert das Gewicht. Passt auf Picatinny-Schienensysteme; zwei Schrauben klemmen den Riser sicher an der Schiene fest.

33.9 EUR 6 33,90 € *

Lieferzeit ca. 14-21 Werktage.
6 Stk. im Lager USA

Eigenschaften: Color: Matte Black Marke: AR-15 Material: Aluminum Number of Bases: 1-Piece Style: Tactical Bases

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Der kompakte Picatinny Mini-Riser hebt Laser, Lichter und andere Zubehörteile an.
Hergestellt aus Flugzeug-Aluminium, hart eloxiert für maximale Haltbarkeit.
Fügt ½" Höhe hinzu und passt sicher auf Picatinny-Schienensysteme.

Eigenschaften

Color: Matte Black Marke: AR-15 Material: Aluminum Number of Bases: 1-Piece Style: Tactical Bases Versandgewicht: 0,045kg Versandhöhe: 13mm Versandbreite: 53mm Versandlänge: 71mm

Erhöhe deine Sicht mit dem AR-15/M16 Mini Riser! 💡 Robuste Aluminiumkonstruktion für Laser und Zubehör. Perfekt für dein Picatinny-System!

Adds Extra 1/2" Elevation For Small Accessories

SPECS: Aluminum, hardcoat anodized, black. 15⁄16 (3.3cm) long, 1¼ (3.1cm) wide, Adds ½" of height measured from top of rail to top of riser. 1.1 oz. (31g) weight.

Mehr...

Fügt zusätzliche ½" Höhe für kleine Zubehörteile hinzu

Mehr...