U.S. Army Standard-Issue Backup Sight For M4/M16A4
Current U.S. Army standard-issue backup rear sight for M4 carbines and M16A4 rifles flips up instantly at the touch of your thumb when primary sight fails or tactical situation makes iron sights preferable. Designed in conjunction with Picatinny Arsenal engineering staff and rigorously tested at Fort Benning and Aberdeen Proving Ground for robustness, ease of use, and effective targeting out to 600 meters. Detent-locking lever lets you quickly switch to one of eight range settings: 200, 300, 350, 400, 450, 500, 550, and 600 meters. Adjust windage easily with grooved, A2-style windage knob and position markers on the back of the sight for repeatability of settings. Bright, white, laser etched numbers and markers are clearly visible even in low light. Rugged machined steel construction ensures sight retains zero even under heavy, full-auto fire. Clamps securely to the rearmost slot of MIL-STD 1913 Picatinny or Weaver-style accessory rail on flattop receiver via simple but strong locking bar and bolt. Rounded corners and beveled edges further reduce danger of snagging on other gear when sight post is down. Regulates correctly with A2 front sight on any AR-15-style rifle or carbine; instructions included for adjusting front sight post height to set exact zero. Designed to co-witness with most non-magnifying optical sights.
SPECS: Steel, matte black finish.
Mehr...
Standard-Notvisier der U.S. Army für M4/M16A4
Aktuelle Standard-Notvisier der U.S. Army für M4-Karabiner und M16A4-Gewehre, das sich sofort mit einem Fingerdruck aufklappt, wenn das Hauptvisier ausfällt oder die taktische Situation Eisenvisiere bevorzugt. Entwickelt in Zusammenarbeit mit dem Ingenieurteam des Picatinny Arsenal und rigoros am Fort Benning und Aberdeen Proving Ground auf Robustheit, Benutzerfreundlichkeit und effektives Zielen bis zu 600 Metern getestet. Der Rastverschluss ermöglicht es dir, schnell zwischen acht Entfernungsstufen zu wechseln: 200, 300, 350, 400, 450, 500, 550 und 600 Meter. Windage lässt sich einfach mit dem geriffelten, A2-Stil Windage-Regler und den Positionsmarkierungen auf der Rückseite des Visiers einstellen, um die Wiederholbarkeit der Einstellungen zu gewährleisten. Helle, weiße, lasergravierte Zahlen und Markierungen sind auch bei schwachem Licht deutlich sichtbar. Die robuste, gefräste Stahlkonstruktion sorgt dafür, dass das Visier auch bei schwerem, vollautomatischem Feuer die Null beibehält. Befestigt sich sicher an der hintersten Nut der MIL-STD 1913 Picatinny- oder Weaver-Style Zubehörschiene auf dem Flattop-Empfänger über eine einfache, aber starke Verriegelungsstange und Schraube. Abgerundete Ecken und abgeschrägte Kanten verringern zusätzlich die Gefahr des Hängensbleibens an anderer Ausrüstung, wenn der Sichtposten heruntergeklappt ist. Reguliert sich korrekt mit dem A2-Frontvisier auf jedem AR-15-Stil Gewehr oder Karabiner; Anweisungen zur Anpassung der Höhe des Frontvisier-Postens sind enthalten, um die exakte Null festzulegen. Entwickelt, um mit den meisten nicht-vergrößernden optischen Visiereinrichtungen zu koexistieren.
SPECS: Stahl, matte schwarze Oberfläche.
Mehr...
Kundenbewertungen zu MATECH AR-15 FLIP-UP ADJ USGI BACKUP IRON REAR SIGHT BLACK
Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 4,2
Works great and is right on the money(04.12.2009)
Mount and set to 200 yards or meters and adjust the front sight for point of impact. True adjustments out to 600 yds/meters with standard 20 barrel. Simple/strong/works. Neg. cost to much.
Combat tested(10.02.2010)
Distance lever is easily moved when bumped. Saw many that would not stay down anymore.
It grows on you.(11.02.2010)
Very good sight, I purchased this sight just to try it out and to say the least it grew on me. It looks funky but works great. If you get an eye for the smaller rear apeture your accuracy will improve even at short range. Works great with red dot sights as a backup.
Overall good sight(23.11.2010)
Have used these in military and on personal guns. Military use over time it allowed "play" and movement of the rear sight aperture. Not a good situation for accuracy, but it's a "backup" after all.
For personal use they are great. A little on the heavy side but very durable, steel and adjustable. Also flat enough when folded to work with an ACOG or M68.
Don't use with burst or full auto fire(14.03.2012)
We used these in my unit when I was with USAF Security Forces. Under burst fire, we had a noticible percentage (5% approx)have problems. The problem was the pin that the rear sight pivots on "walks" out to the right, giving the shooter a complete fail in accuracy. We thought it was the shooter, but after several of us Instructors shot the rifle-and had the same result, we looked closer. That's when we found the pin problem.
BUIS(17.12.2012)
I am unsure of how the people maintained the weapon systems they placed this BUIS on, however, I have used them for the past seven years without issue. Further, I have not seen a single Soldier have issues with them. I am an infantrymen, so, we spend a large amount of time performing weapons maintenance. I have never had one have a "pin" come loose during either of my tours of Iraq or Afghanistan with weapons fired on both burst and semi. Nor have I had one fail to lock back down after use. I use one on my personal owned DPMS as well.
Inspires Confidence(25.07.2013)
For those who were brought up with, and used iron sights for half their adult life before moving to optics, this sight really in 2nd to none. It can stand its ground as the primary sight too because once the weapon is properly zeroed, the range marking can be trusted. Just dial up or down to suit.
Good solid reliable sight.
Lowest profile BUIS that i am aware of(10.01.2014)
This sight folds down to almost nothing.
I have had a lot of BUIS come and go. All where and still are very good.
This one is just lower profile.
This is not the sight i would choose for match rifle shooting. It is also not designed to do that. I was designed to be small, lightweight, low profile and tough.
It is all of those things.
Solid(02.02.2014)
No problems with this guy. I had one a while back which had a spring problem...the sight wouldnt stay down in the "locked" position. Other than that Ive seen dozens of these things on issued M4's take a serious beating and do just fine. Like someone else said-this is not a match sight. Its a back up for a combat weapon. I can hit the 300m target on the pop up range all day with this sight.
A MUST HAVE!(23.07.2017)
If you owned this product in the past and experienced walking pins and stripping... You unfortunately bought a generic clone. If it's the real deal, you'll notice it's rather expensive.
I love this sight. Very solid and locks down tight. Nice low profile in it's stowed positron. It'll never fail on you. This will survive WWIII and beyond. No gimmick or fancy features. Just robust, solid, true performance. My matech came with the picatinny logo and their name Laser etched on the right side by the windage knob.
Artikel-Nr.: 100003702 MATECH AR-15 FLIP-UP ADJ USGI BACKUP IRON REAR SIGHT BLACK Herstellerproduktnummer: 12996812-C Aktuelle Standard-Notvisier der U.S. Army für M4-Karabiner und M16A4-Gewehre, das sich sofort mit einem Fingerdruck aufklappt, wenn das Hauptvisier ausfällt oder die taktische Situation Eisenvisiere bevorzugt. Entwickelt in Zusammenarbeit mit dem Ingenieurteam des Picatinny Arsenal und rigoros am Fort Benning und Aberdeen Proving Ground auf Robustheit, Benutzerfreundlichkeit und effektives Zielen bis zu 600 Metern getestet. Der Rastverschluss ermöglicht es dir, schnell zwischen acht Entfernungsstufen zu wechseln: 200, 300, 350, 400, 450, 500, 550 und 600 Meter. Windage lässt sich einfach mit dem geriffelten, A2-Stil Windage-Regler und den Positionsmarkierungen auf der Rückseite des Visiers einstellen, um die Wiederholbarkeit der Einstellungen zu gewährleisten. Helle, weiße, lasergravierte Zahlen und Markierungen sind auch bei schwachem Licht deutlich sichtbar. Die robuste, gefräste Stahlkonstruktion sorgt dafür, dass das Visier auch bei schwerem, vollautomatischem Feuer die Null beibehält. Befestigt sich sicher an der hintersten Nut der MIL-STD 1913 Picatinny- oder Weaver-Style Zubehörschiene auf dem Flattop-Empfänger über eine einfache, aber starke Verriegelungsstange und Schraube. Abgerundete Ecken und abgeschrägte Kanten verringern zusätzlich die Gefahr des Hängensbleibens an anderer Ausrüstung, wenn der Sichtposten heruntergeklappt ist. Reguliert sich korrekt mit dem A2-Frontvisier auf jedem AR-15-Stil Gewehr oder Karabiner; Anweisungen zur Anpassung der Höhe des Frontvisier-Postens sind enthalten, um die exakte Null festzulegen. Entwickelt, um mit den meisten nicht-vergrößernden optischen Visiereinrichtungen zu koexistieren.
194.9EUR0194,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Der AR-15 USGI Backup Iron Rear Sight ist sofort einsatzbereit und klappbar, ideal für taktische Situationen.
Er bietet acht Distanz-Einstellungen und eine benutzerfreundliche Windeneinstellung für präzises Zielen bis zu 600 Metern.
Die robuste Stahlkonstruktion gewährleistet Zuverlässigkeit unter schwerem Feuer und lässt sich einfach an MIL-STD 1913 Picatinny oder Weaver-Schienen montieren.
U.S. Army Standard-Issue Backup Sight For M4/M16A4
Current U.S. Army standard-issue backup rear sight for M4 carbines and M16A4 rifles flips up instantly at the touch of your thumb when primary sight fails or tactical situation makes iron sights preferable. Designed in conjunction with Picatinny Arsenal engineering staff and rigorously tested at Fort Benning and Aberdeen Proving Ground for robustness, ease of use, and effective targeting out to 600 meters. Detent-locking lever lets you quickly switch to one of eight range settings: 200, 300, 350, 400, 450, 500, 550, and 600 meters. Adjust windage easily with grooved, A2-style windage knob and position markers on the back of the sight for repeatability of settings. Bright, white, laser etched numbers and markers are clearly visible even in low light. Rugged machined steel construction ensures sight retains zero even under heavy, full-auto fire. Clamps securely to the rearmost slot of MIL-STD 1913 Picatinny or Weaver-style accessory rail on flattop receiver via simple but strong locking bar and bolt. Rounded corners and beveled edges further reduce danger of snagging on other gear when sight post is down. Regulates correctly with A2 front sight on any AR-15-style rifle or carbine; instructions included for adjusting front sight post height to set exact zero. Designed to co-witness with most non-magnifying optical sights.
SPECS: Steel, matte black finish.
Mehr...
Standard-Notvisier der U.S. Army für M4/M16A4
Aktuelle Standard-Notvisier der U.S. Army für M4-Karabiner und M16A4-Gewehre, das sich sofort mit einem Fingerdruck aufklappt, wenn das Hauptvisier ausfällt oder die taktische Situation Eisenvisiere bevorzugt. Entwickelt in Zusammenarbeit mit dem Ingenieurteam des Picatinny Arsenal und rigoros am Fort Benning und Aberdeen Proving Ground auf Robustheit, Benutzerfreundlichkeit und effektives Zielen bis zu 600 Metern getestet. Der Rastverschluss ermöglicht es dir, schnell zwischen acht Entfernungsstufen zu wechseln: 200, 300, 350, 400, 450, 500, 550 und 600 Meter. Windage lässt sich einfach mit dem geriffelten, A2-Stil Windage-Regler und den Positionsmarkierungen auf der Rückseite des Visiers einstellen, um die Wiederholbarkeit der Einstellungen zu gewährleisten. Helle, weiße, lasergravierte Zahlen und Markierungen sind auch bei schwachem Licht deutlich sichtbar. Die robuste, gefräste Stahlkonstruktion sorgt dafür, dass das Visier auch bei schwerem, vollautomatischem Feuer die Null beibehält. Befestigt sich sicher an der hintersten Nut der MIL-STD 1913 Picatinny- oder Weaver-Style Zubehörschiene auf dem Flattop-Empfänger über eine einfache, aber starke Verriegelungsstange und Schraube. Abgerundete Ecken und abgeschrägte Kanten verringern zusätzlich die Gefahr des Hängensbleibens an anderer Ausrüstung, wenn der Sichtposten heruntergeklappt ist. Reguliert sich korrekt mit dem A2-Frontvisier auf jedem AR-15-Stil Gewehr oder Karabiner; Anweisungen zur Anpassung der Höhe des Frontvisier-Postens sind enthalten, um die exakte Null festzulegen. Entwickelt, um mit den meisten nicht-vergrößernden optischen Visiereinrichtungen zu koexistieren.
SPECS: Stahl, matte schwarze Oberfläche.
Mehr...
Kundenbewertungen zu MATECH AR-15 FLIP-UP ADJ USGI BACKUP IRON REAR SIGHT BLACK
Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 4,2
Works great and is right on the money(04.12.2009)
Mount and set to 200 yards or meters and adjust the front sight for point of impact. True adjustments out to 600 yds/meters with standard 20 barrel. Simple/strong/works. Neg. cost to much.
Combat tested(10.02.2010)
Distance lever is easily moved when bumped. Saw many that would not stay down anymore.
It grows on you.(11.02.2010)
Very good sight, I purchased this sight just to try it out and to say the least it grew on me. It looks funky but works great. If you get an eye for the smaller rear apeture your accuracy will improve even at short range. Works great with red dot sights as a backup.
Overall good sight(23.11.2010)
Have used these in military and on personal guns. Military use over time it allowed "play" and movement of the rear sight aperture. Not a good situation for accuracy, but it's a "backup" after all.
For personal use they are great. A little on the heavy side but very durable, steel and adjustable. Also flat enough when folded to work with an ACOG or M68.
Don't use with burst or full auto fire(14.03.2012)
We used these in my unit when I was with USAF Security Forces. Under burst fire, we had a noticible percentage (5% approx)have problems. The problem was the pin that the rear sight pivots on "walks" out to the right, giving the shooter a complete fail in accuracy. We thought it was the shooter, but after several of us Instructors shot the rifle-and had the same result, we looked closer. That's when we found the pin problem.
BUIS(17.12.2012)
I am unsure of how the people maintained the weapon systems they placed this BUIS on, however, I have used them for the past seven years without issue. Further, I have not seen a single Soldier have issues with them. I am an infantrymen, so, we spend a large amount of time performing weapons maintenance. I have never had one have a "pin" come loose during either of my tours of Iraq or Afghanistan with weapons fired on both burst and semi. Nor have I had one fail to lock back down after use. I use one on my personal owned DPMS as well.
Inspires Confidence(25.07.2013)
For those who were brought up with, and used iron sights for half their adult life before moving to optics, this sight really in 2nd to none. It can stand its ground as the primary sight too because once the weapon is properly zeroed, the range marking can be trusted. Just dial up or down to suit.
Good solid reliable sight.
Lowest profile BUIS that i am aware of(10.01.2014)
This sight folds down to almost nothing.
I have had a lot of BUIS come and go. All where and still are very good.
This one is just lower profile.
This is not the sight i would choose for match rifle shooting. It is also not designed to do that. I was designed to be small, lightweight, low profile and tough.
It is all of those things.
Solid(02.02.2014)
No problems with this guy. I had one a while back which had a spring problem...the sight wouldnt stay down in the "locked" position. Other than that Ive seen dozens of these things on issued M4's take a serious beating and do just fine. Like someone else said-this is not a match sight. Its a back up for a combat weapon. I can hit the 300m target on the pop up range all day with this sight.
A MUST HAVE!(23.07.2017)
If you owned this product in the past and experienced walking pins and stripping... You unfortunately bought a generic clone. If it's the real deal, you'll notice it's rather expensive.
I love this sight. Very solid and locks down tight. Nice low profile in it's stowed positron. It'll never fail on you. This will survive WWIII and beyond. No gimmick or fancy features. Just robust, solid, true performance. My matech came with the picatinny logo and their name Laser etched on the right side by the windage knob.