Indexes Muzzle Accessories Precisely Without Peel Or Crush Washers
These stainless steel washers are precisely machined to within .0001" to allow accurate indexing of muzzle brakes and flash hiders without the need for peel or crush washers. Set includes 18 individual washers of different thicknesses to allow 360 degree timing in 20 degree increments. Only one washer is needed for each application.
SPECS: Stainless steel, matte gray finish. Sets available for ½" x 28 and 5⁄8" x 24 threads. Set includes 18 washers and instructions.
Mehr...
Indiziert Mündungszubehör präzise ohne Peel- oder Crush-Unterlegscheiben
Diese Unterlegscheiben aus Edelstahl sind präzise auf .0001" gefertigt, um eine genaue Ausrichtung von Mündungsbremsen und Flammenmündungsfeuer zu ermöglichen, ohne dass Peel- oder Crush-Unterlegscheiben benötigt werden. Das Set enthält 18 einzelne Unterlegscheiben in unterschiedlichen Dicken, um eine 360-Grad-Timing in 20-Grad-Schritten zu ermöglichen. Es wird nur eine Unterlegscheibe für jede Anwendung benötigt.
TECHNISCHE DATEN: Edelstahl, matte graue Oberfläche. Sets verfügbar für ½" x 28 und 5⁄8" x 24 Gewinde. Das Set enthält 18 Unterlegscheiben und eine Anleitung.
Mehr...
Kundenbewertungen zu PRECISION ARMAMENT AR-15 1/2-28" ACCU-WASHER SYSTEM STAINLESS STEEL SILVER
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4
Awesome!(29.05.2013)
Was not sure about these washers when I saw them online...I was proven wrong! These are awesome! Super easy to install! Easier to use than crush washers! Will purchase these from now on when installing flash hiders, comps, and brakes!
Great Product(12.04.2014)
the guy that invented these deservs a raise. such a simple concept but work wonders when installing a comp. Always get the right torque everytime, and never have to worry about changing accuracy.
Made Me A Believer(14.05.2014)
I didn't quite get it when I ordered them, but the instructions are super simple and intuitive. Two attempts in about 10 minutes, and I got my comp torqued. That's compared to 30 minutes with some spare AAC shims to get kinda close. I was worried it would look bad or cheap on my stainless barrel and comp, but it's hardly noticeable. Might try to polish it, since the shim is stainless.
Needs work(18.11.2015)
The way they are marked for thickness hash marks on outside leaves an undesirable appearance. And if your barrel threads have a relief cut at the shoulder it will offset out of center.
If you clean this up it is just as easy to time and index buy moving one shoulder or the other.
Good idea, but there's a problem(17.02.2017)
This system is a good idea. However, there is a serious problem. Most of my barrels (and most I've ever seen) have a small radius on the shoulder where the accu-washer needs to seat. The inner diameter of the accu-washers is too small to account for this. In order to work properly, the accu-washers need to be be beveled on one side of the inner diameter. This kind of defeats the purpose of an easy install, so I can't recommend these.
Artikel-Nr.: 100009793 PRECISION ARMAMENT AR-15 1/2-28" ACCU-WASHER SYSTEM STAINLESS STEEL SILVER Herstellerproduktnummer: A02119 Diese Unterlegscheiben aus Edelstahl sind präzise auf .0001" gefertigt, um eine genaue Ausrichtung von Mündungsbremsen und Flammenmündungsfeuer zu ermöglichen, ohne dass Peel- oder Crush-Unterlegscheiben benötigt werden. Das Set enthält 18 einzelne Unterlegscheiben in unterschiedlichen Dicken, um eine 360-Grad-Timing in 20-Grad-Schritten zu ermöglichen. Es wird nur eine Unterlegscheibe für jede Anwendung benötigt.
59.9EUR2059,90 €
*
Lieferzeit ca. 14-21 Werktage. Mehr als 10 Stk. im Lager USA
Indexes Muzzle Accessories Precisely Without Peel Or Crush Washers
These stainless steel washers are precisely machined to within .0001" to allow accurate indexing of muzzle brakes and flash hiders without the need for peel or crush washers. Set includes 18 individual washers of different thicknesses to allow 360 degree timing in 20 degree increments. Only one washer is needed for each application.
SPECS: Stainless steel, matte gray finish. Sets available for ½" x 28 and 5⁄8" x 24 threads. Set includes 18 washers and instructions.
Mehr...
Indiziert Mündungszubehör präzise ohne Peel- oder Crush-Unterlegscheiben
Diese Unterlegscheiben aus Edelstahl sind präzise auf .0001" gefertigt, um eine genaue Ausrichtung von Mündungsbremsen und Flammenmündungsfeuer zu ermöglichen, ohne dass Peel- oder Crush-Unterlegscheiben benötigt werden. Das Set enthält 18 einzelne Unterlegscheiben in unterschiedlichen Dicken, um eine 360-Grad-Timing in 20-Grad-Schritten zu ermöglichen. Es wird nur eine Unterlegscheibe für jede Anwendung benötigt.
TECHNISCHE DATEN: Edelstahl, matte graue Oberfläche. Sets verfügbar für ½" x 28 und 5⁄8" x 24 Gewinde. Das Set enthält 18 Unterlegscheiben und eine Anleitung.
Mehr...
Kundenbewertungen zu PRECISION ARMAMENT AR-15 1/2-28" ACCU-WASHER SYSTEM STAINLESS STEEL SILVER
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4
Awesome!(29.05.2013)
Was not sure about these washers when I saw them online...I was proven wrong! These are awesome! Super easy to install! Easier to use than crush washers! Will purchase these from now on when installing flash hiders, comps, and brakes!
Great Product(12.04.2014)
the guy that invented these deservs a raise. such a simple concept but work wonders when installing a comp. Always get the right torque everytime, and never have to worry about changing accuracy.
Made Me A Believer(14.05.2014)
I didn't quite get it when I ordered them, but the instructions are super simple and intuitive. Two attempts in about 10 minutes, and I got my comp torqued. That's compared to 30 minutes with some spare AAC shims to get kinda close. I was worried it would look bad or cheap on my stainless barrel and comp, but it's hardly noticeable. Might try to polish it, since the shim is stainless.
Needs work(18.11.2015)
The way they are marked for thickness hash marks on outside leaves an undesirable appearance. And if your barrel threads have a relief cut at the shoulder it will offset out of center.
If you clean this up it is just as easy to time and index buy moving one shoulder or the other.
Good idea, but there's a problem(17.02.2017)
This system is a good idea. However, there is a serious problem. Most of my barrels (and most I've ever seen) have a small radius on the shoulder where the accu-washer needs to seat. The inner diameter of the accu-washers is too small to account for this. In order to work properly, the accu-washers need to be be beveled on one side of the inner diameter. This kind of defeats the purpose of an easy install, so I can't recommend these.