Über 300.000 Kunden - wir sagen Danke!

40,000+ Produkte aus Jagd und Schiesssport

Entdecke die einstellbaren Bettungshülsen von BROWNELLS! 🛠️ Einfach zu installieren und perfekt für jeden Gewehrschaft. Hol dir jetzt dein Paar!

BROWNELLS ADJUSTABLE PILLAR BEDDING SLEEVE

080910000

Eigenschaften

  • Versandgewicht: 0,027kg
0 0 1 EUR

Beschreibung:

Original anzeigen (Englisch)

Vielseitige und anpassbare Bettungssleeves für dein Gewehr

Die vollständig verstellbaren Bettungssleeves sind einfach zu installieren und passen nahezu auf alle Arten und Größen von Gewehrschäften. Sie sind leicht und verfügen über vorgeformte Anpassungsringe, die sich auf einer vollständig gewindeten Welle bewegen, sodass du sie für eine genaue Passform einstellen kannst, ohne zusätzliches, zeitaufwendiges Schneiden, Feilen oder Bearbeiten.

Produktdetails:

  • Material: Sleeve - Stahl, .296" (7.5mm) ID, 7/16"-20 tpi
  • Anpassungsring: Aluminium, .560" (14mm) OD
  • Front: .700" (17mm) lang
  • Rear: 1.16" (2.9cm) lang

Die Installation erfordert Änderungen am Schaft und an der synthetischen Bettung. Die Bettungssleeves werden nur im Paar verkauft, wobei die langen für die hintere Schraube und die kurzen für die vordere Schraube gedacht sind.



Eigenschaften

  • Versandgewicht: 0,027kg

Kundenbewertungen

Kundenbewertungen (2)

5 / 5
Sehr empfehlenswert

Brownells USA Phenomenal Product! 04.08.2013

I recently used these for the first time on a Win Model 70 Super Grade, CRF, made in the 80's out of the CT plant. I have used Brownell's Acraglass Gel with steel ferrels for pillars for years on other rifles, but decided to try these adjustable pillars for this project. As the previous reviewer stated, getting the holes drilled precisely is critical. I used a 1/2" bit, then a Dremmel tool to enlarge the holes, so that the pillars just slid in an out of the stock. This allowed me to adjust them precisely before gluing in place and making the final adjustments to the sleeve. What is so great about this product is that you can precisely adjust the pillars to get the action of your rifle to lay perfectly in the stock with a perfect free float. Of course then I glass bedded the action, tang, and floor plate area. If you take your time, the product is very easy to use and the results will astound you as to how accurate a factory rifle can be when bedded properly.

Sehr empfehlenswert

Brownells USA Works great. 20.06.2012

I used these to pillar bed a pre 64 Winchester. They are great for someone who is doing a home job. They adjust a little to easy and would move when being placed in the hole. A dab of grease on the thread where the nuts are sitting will help. Make sure you have the correct size Forstner bit. I could not find a single local store that carries this size (9/16). If I could do it again I would get the piloted Forstner bit sold by Brownells (Stock #:080-909-000WB). It is not cheap, but it cost the same as a local machinist charged me to drill the holes in my stock. You could do it with a hand drill at home but these holes must be perfectly straight or you are defeating the purpose.

Schon gewusst?

Herstellerinformationen

Verantwortlicher Wirtschaftsakteur gemäß EU-Verordnung

Brownells Austria GmbH
Hauptstraße 13-15
2332 Hennersdorf
Österreich
info@brownells.at

Ups! Da ist etwas schiefgelaufen.

Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.

Zurück nach oben