Quickly and easily locate new frame hole for bobtail housing
Mehr...
Finde schnell und einfach das neue Rahmenloch für das Bobtail-Gehäuse.
Mehr...
Kundenbewertungen zu ED BROWN INSTALLATION JIG
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 4,3
This is a great product! used many times(23.10.2009)
I have used this Ed Brown installation jig many time with great ease, the finished product is great looking and can't stress enough how easy it is to use , you will love the Looks if you carry a Commander + make a big difference when on your hip carry mode.Govt Models Look just as good and do make a Big difference when carrying.I do give this a 5 star.for how easy it is to use and the its looks.
awesome!!!!(04.01.2011)
loved the look had to do one for myself... this jig made it simple!
Perfect Simplicity(16.12.2011)
Easy to use and dead on.
Ed Brown Bobtail Jig(01.05.2015)
This jig is very easy to use and is very basic. A drill press makes it almost impossible to make a mistake.
I shifted from the directions in that I did not use a #2 center drill which will cost you another 35 bucks. I used the 5/32" carbide bit in a drill press, used some cutting oil, and slowly cut the first hole. Cleaned the holes of metal chips, left the frame on the jig, and then cut the second hole by pressing the carbide bit thru the first hole, then thru the jig, and simply cut the second hole. No problems at all and no need to turn the frame over to do the opposite side. As long as your bit clears the jig on all sides you will cut perfect matching holes. Must have if building bobtail 1911s.
absolutely useless, you spend $50 on something that does not give you any benefit at all, since you can use the actual part to be installed as reference. And using this jig to hold the frame while drilling, as depicted in one of the other comments, sure makes it difficult to line up frame true 90 degrees to drill.
Artikel-Nr.: 087953000 ED BROWN INSTALLATION JIG Herstellerproduktnummer: 953800732953007 Finde schnell und einfach das neue Rahmenloch für das Bobtail-Gehäuse.
79.9EUR279,90 €
*
Lieferzeit ca. 14-21 Werktage. 2 Stk. im Lager USA
Quickly and easily locate new frame hole for bobtail housing
Mehr...
Finde schnell und einfach das neue Rahmenloch für das Bobtail-Gehäuse.
Mehr...
Kundenbewertungen zu ED BROWN INSTALLATION JIG
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 4,3
This is a great product! used many times(23.10.2009)
I have used this Ed Brown installation jig many time with great ease, the finished product is great looking and can't stress enough how easy it is to use , you will love the Looks if you carry a Commander + make a big difference when on your hip carry mode.Govt Models Look just as good and do make a Big difference when carrying.I do give this a 5 star.for how easy it is to use and the its looks.
awesome!!!!(04.01.2011)
loved the look had to do one for myself... this jig made it simple!
Perfect Simplicity(16.12.2011)
Easy to use and dead on.
Ed Brown Bobtail Jig(01.05.2015)
This jig is very easy to use and is very basic. A drill press makes it almost impossible to make a mistake.
I shifted from the directions in that I did not use a #2 center drill which will cost you another 35 bucks. I used the 5/32" carbide bit in a drill press, used some cutting oil, and slowly cut the first hole. Cleaned the holes of metal chips, left the frame on the jig, and then cut the second hole by pressing the carbide bit thru the first hole, then thru the jig, and simply cut the second hole. No problems at all and no need to turn the frame over to do the opposite side. As long as your bit clears the jig on all sides you will cut perfect matching holes. Must have if building bobtail 1911s.
absolutely useless, you spend $50 on something that does not give you any benefit at all, since you can use the actual part to be installed as reference. And using this jig to hold the frame while drilling, as depicted in one of the other comments, sure makes it difficult to line up frame true 90 degrees to drill.