Rugged, Reliable, Hardened Steel For Extreme Tactical Duty
Heavy duty tactical magazine catch ensures secure mag retention and fast, reliable release under extreme service and competition conditions. Serrated button is 1⁄16" taller than factory button to provide positive, non-slip finger contact to help you drop the magazine on the first attempt. The interior of the catch is relieved to prevent you from over-extending the catch and trapping the spent magazine. Available in stainless or carbon steel. Does not include catch lock and spring.
SPECS: Carbon steel, blued, or stainless steel (SS),natural finish.
Mehr...
Robust, zuverlässig, gehärteter Stahl für extreme taktische Einsätze
Der robuste taktische Magazinrelease sorgt für sicheren Halt des Magazins und eine schnelle, zuverlässige Freigabe unter extremen Einsatz- und Wettbewerbsbedingungen. Der gezahnte Knopf ist 1⁄16" höher als der Standardknopf, um dir einen positiven, rutschfesten Fingerkontakt zu bieten, damit du das Magazin beim ersten Versuch abwerfen kannst. Das Innere des Releases ist entlastet, um zu verhindern, dass du das Release überdehnst und das leere Magazin festhältst. Erhältlich in Edelstahl oder Kohlenstoffstahl. Enthält nicht das Release-Lock und die Feder.
TECHNISCHE DATEN: Kohlenstoffstahl, blued oder Edelstahl (SS),natürlicher Finish.
Mehr...
Kundenbewertungen zu HARRISON DESIGN & CONSULTING MAGAZINE RELEASE, SS
Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 4,3
GREAT FIT AND FUNCTION!!!(27.02.2011)
I tried two different Ed Brown extended tactical releases and neither one fit for functioned well. They also did not have a stop machined into it to keep the release from being pushed too far and jamming the mag.I was disappointed in the Ed Brown Product!!! BUT, I was impressed with the fit of this one! I put it in...the only thing I did was clean up the casting/machining marks. It was smooth and didn't over-extend as stated. Great Part!
SS mag catch(17.06.2011)
Drop in fit to my Springfield TRP. Works 100%, with factory and WC 47d mags. Another great product form harrison!
Will buy again.(26.12.2011)
Part went into gun with minor fitting which I would rather have than falling in. Minimal clearance. Looks good in gun.
Didn't have a good experience(24.02.2012)
I bought this extended mag release button based on the 5 star reviews it got. I tried to install it in a Colt Series 80 government model and though it fit the frame fine I could not get the holding screw to turn enough to release when installing. When compared to the original Colt release, which works perfectly, it appears there's no clearance notch to allow the tab to pivot in the frame.
Perfect Fit(06.07.2016)
Like the title says, fit perfectly, works properly and took all of two minutes to install in my old Kimber Custom.
Dropped in, works perfectly(27.11.2017)
I used the Harrison stainless magazine catch to replace the blued MIM catch that came with my Ruger SR1911 CMD. Part dropped right in, works perfectly and looks great on my stainless 1911. Note you will need to order the catch lock and spring also unless you will be reusing your existing parts. Very pleased with this product.
True drop in(18.07.2018)
Used this to replace a competition style mag catch release on my Colt Officer's ACP. The process takes about a minute, maybe two. Zero fitting required, it was a complete drop in fit. The finish of the stainless was an adequate match to my stainless Officer's ACP. I wish all work was this easy. Testing afterward: it works, that's all I can ask for!
The best 1911 mag catch(24.12.2011)
This is the best mag catch you can get for a 1911. It fit my Kimber perfect with no fitting. It has a built in stop so you cannot push the button in too far as to hit the magazine such as with the Brown ext mag catch.
"Drop in" is always hit or miss(20.07.2013)
Three stars due to "tolerance stacking."
I installed this in an STI Spartan 9mm. The mag catch would not seat fully into the frame.
After trying it in several other 1911s and finding it fit fine in them, I used a 5/16 end mill, spinning it by hand in reverse, to clean up any burrs that may have been in the Armscor frame.
Then I found it trapped the magazine while reloading, on all of the 1911s I installed it in. The Armscor mag catch lock may be too short, I didn't compare it to others. I relieved the inside of the mag catch with a sanding drum on my dremel.
Overall, I'm not unhappy with it and it appears to be a high quality part. But I always assume 1911 parts will need some fitting.
Artikel-Nr.: 100004997 HARRISON DESIGN & CONSULTING MAGAZINE RELEASE, SS Herstellerproduktnummer: HD-202-S Der robuste taktische Magazinrelease sorgt für sicheren Halt des Magazins und eine schnelle, zuverlässige Freigabe unter extremen Einsatz- und Wettbewerbsbedingungen. Der gezahnte Knopf ist 1⁄16" höher als der Standardknopf, um dir einen positiven, rutschfesten Fingerkontakt zu bieten, damit du das Magazin beim ersten Versuch abwerfen kannst. Das Innere des Releases ist entlastet, um zu verhindern, dass du das Release überdehnst und das leere Magazin festhältst. Erhältlich in Edelstahl oder Kohlenstoffstahl. Enthält nicht das Release-Lock und die Feder.
49.9EUR149,90 €
*
Lieferzeit ca. 14-21 Werktage. 1 Stk. im Lager USA
US-Exportklassifizierung: 0A501.x
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Artikel-Nr.: 100004998 HARRISON DESIGN & CONSULTING MAGAZINE RELEASE, BLUED Herstellerproduktnummer: HD-202-B Der robuste taktische Magazinrelease sorgt für sicheren Halt des Magazins und eine schnelle, zuverlässige Freigabe unter extremen Einsatz- und Wettbewerbsbedingungen. Der gezahnte Knopf ist 1⁄16" höher als der Standardknopf, um dir einen positiven, rutschfesten Fingerkontakt zu bieten, damit du das Magazin beim ersten Versuch abwerfen kannst. Das Innere des Releases ist entlastet, um zu verhindern, dass du das Release überdehnst und das leere Magazin festhältst. Erhältlich in Edelstahl oder Kohlenstoffstahl. Enthält nicht das Release-Lock und die Feder.
54.9EUR154,90 €
*
Lieferzeit ca. 14-21 Werktage. 1 Stk. im Lager USA
US-Exportklassifizierung: 0A501.x
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Entdecke den 1911 EXTREME SERVICE MAGAZIN CATCH ✨ für sicheren Halt und schnelle Freigabe. Ideal für extreme Einsatzbedingungen!
Rugged, Reliable, Hardened Steel For Extreme Tactical Duty
Heavy duty tactical magazine catch ensures secure mag retention and fast, reliable release under extreme service and competition conditions. Serrated button is 1⁄16" taller than factory button to provide positive, non-slip finger contact to help you drop the magazine on the first attempt. The interior of the catch is relieved to prevent you from over-extending the catch and trapping the spent magazine. Available in stainless or carbon steel. Does not include catch lock and spring.
SPECS: Carbon steel, blued, or stainless steel (SS),natural finish.
Mehr...
Robust, zuverlässig, gehärteter Stahl für extreme taktische Einsätze
Der robuste taktische Magazinrelease sorgt für sicheren Halt des Magazins und eine schnelle, zuverlässige Freigabe unter extremen Einsatz- und Wettbewerbsbedingungen. Der gezahnte Knopf ist 1⁄16" höher als der Standardknopf, um dir einen positiven, rutschfesten Fingerkontakt zu bieten, damit du das Magazin beim ersten Versuch abwerfen kannst. Das Innere des Releases ist entlastet, um zu verhindern, dass du das Release überdehnst und das leere Magazin festhältst. Erhältlich in Edelstahl oder Kohlenstoffstahl. Enthält nicht das Release-Lock und die Feder.
TECHNISCHE DATEN: Kohlenstoffstahl, blued oder Edelstahl (SS),natürlicher Finish.
Mehr...
Kundenbewertungen zu HARRISON DESIGN & CONSULTING MAGAZINE RELEASE, SS
Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 4,3
GREAT FIT AND FUNCTION!!!(27.02.2011)
I tried two different Ed Brown extended tactical releases and neither one fit for functioned well. They also did not have a stop machined into it to keep the release from being pushed too far and jamming the mag.I was disappointed in the Ed Brown Product!!! BUT, I was impressed with the fit of this one! I put it in...the only thing I did was clean up the casting/machining marks. It was smooth and didn't over-extend as stated. Great Part!
SS mag catch(17.06.2011)
Drop in fit to my Springfield TRP. Works 100%, with factory and WC 47d mags. Another great product form harrison!
Will buy again.(26.12.2011)
Part went into gun with minor fitting which I would rather have than falling in. Minimal clearance. Looks good in gun.
Didn't have a good experience(24.02.2012)
I bought this extended mag release button based on the 5 star reviews it got. I tried to install it in a Colt Series 80 government model and though it fit the frame fine I could not get the holding screw to turn enough to release when installing. When compared to the original Colt release, which works perfectly, it appears there's no clearance notch to allow the tab to pivot in the frame.
Perfect Fit(06.07.2016)
Like the title says, fit perfectly, works properly and took all of two minutes to install in my old Kimber Custom.
Dropped in, works perfectly(27.11.2017)
I used the Harrison stainless magazine catch to replace the blued MIM catch that came with my Ruger SR1911 CMD. Part dropped right in, works perfectly and looks great on my stainless 1911. Note you will need to order the catch lock and spring also unless you will be reusing your existing parts. Very pleased with this product.
True drop in(18.07.2018)
Used this to replace a competition style mag catch release on my Colt Officer's ACP. The process takes about a minute, maybe two. Zero fitting required, it was a complete drop in fit. The finish of the stainless was an adequate match to my stainless Officer's ACP. I wish all work was this easy. Testing afterward: it works, that's all I can ask for!
The best 1911 mag catch(24.12.2011)
This is the best mag catch you can get for a 1911. It fit my Kimber perfect with no fitting. It has a built in stop so you cannot push the button in too far as to hit the magazine such as with the Brown ext mag catch.
"Drop in" is always hit or miss(20.07.2013)
Three stars due to "tolerance stacking."
I installed this in an STI Spartan 9mm. The mag catch would not seat fully into the frame.
After trying it in several other 1911s and finding it fit fine in them, I used a 5/16 end mill, spinning it by hand in reverse, to clean up any burrs that may have been in the Armscor frame.
Then I found it trapped the magazine while reloading, on all of the 1911s I installed it in. The Armscor mag catch lock may be too short, I didn't compare it to others. I relieved the inside of the mag catch with a sanding drum on my dremel.
Overall, I'm not unhappy with it and it appears to be a high quality part. But I always assume 1911 parts will need some fitting.