Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versandkostenfreie Lieferung ab 299,-€

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

WILSON COMBAT
1911 BARREL BUSHING

874218000738 965029002

Blued Or Stainless, Target Grade

Installs in most 1911 Autos with little to no fitting. O.D.’s fit nicely in most slides. Blued & stainless version may need fitting.

SPECS: #29B Blued - .825" (20.9mm) long, .575" (14.6mm) I.D., .703" (17.9mm) O.D. #29S Stainless - .825" (20.9mm) long. .578" I.D., .702" (17.8mm) O.D. #29CO Officer's Model Stainless - .700" (17.79mm) I.D., .766" (19.47mm) O.D.

Mehr...

Blau oder Edelstahl, Zielqualität

Lässt sich in den meisten 1911 Autos mit wenig bis gar keinem Anpassungsbedarf installieren. Die O.D.s passen gut in die meisten Schlitze. Die blauen und Edelstahlversionen benötigen möglicherweise eine Anpassung.

SPECS: #29B Blued - .825" (20.9mm) lang, .575" (14.6mm) I.D., .703" (17.9mm) O.D. #29S Edelstahl - .825" (20.9mm) lang. .578" I.D., .702" (17.8mm) O.D. #29CO Officer's Model Edelstahl - .700" (17.79mm) I.D., .766" (19.47mm) O.D.

Mehr...

Kundenbewertungen zu WILSON COMBAT WILSON #29S BUSHING

Anzahl der Bewertungen: 8
Von brownells.com: 8
Durchschnittliche Bewertung: 4,8

Lots of extra metal for a tight fitting (09.04.2011)

I had to do a couple hours of hand polishing just to get it to fit into the slide on my wife Colt Officers model 1911. After that came about 30 minutes of needle filing, trying to shape the locking lug so that it would turn in engage and stop lined up exactly with the plunger hole. I'm going to be installing a Wilson Combat full length guide rod and reverse plug kit so there is no need for the bushing to over travel like the factory. I stopped filing the locking lug before I reached the over travel position.

very useful product (11.06.2010)

i have a small custom shop,have used several of these, improves acurracy greatly,

Fitting required (14.07.2010)

I had some fitting to do , but my gun is also a Norinco with poor spec. ID and OD had to be trim and polished. Nice look and tight fit, don't forget to get a barrel wrench.

Good quality (13.03.2017)

I replaced old collet bushing in my Series 70 Colt Government with this SS Wilson Combat Bushing. The bushing to slide fit was perfect. The I.D. measured .579 and my barrel measured .580 so I hand sanded the I.D. of the bushing to .581. A day at the range showed tighter groups then I've had since I bought the pistol in early 80.s. I went from 6" groups to less then 2" at 20 yds. I suggest hand sanding over using power tools for fitting to get the best fit. Great, easy to install product. Make sure you have a bushing wrench.

1911a1 Barrel Bushing (06.01.2011)

I will say that Wilson Combat has great quality products. But, when it comes to the barrel bushing for a Springfield 1911A1 Mil-Spec to drop in, forget it. It will require some work from a gunsmith. I am a hobby gunsmith but, this is a bit advanced for me to even try to make it work when I don't have the correct tool for the job.

great product (02.11.2012)

took a bit of fitting, but now my old norinco has a bushing that requires a wrench. the barrel is also quite a bit tighter in the bushing. I cant wait to test it out as I've had great luck with there other products and cant wait to see my groups shrink.

Didn't fit my R1 (01.03.2018)

I'm sure it works fine, Wilson Combat doesn't make junk. However it did not fit my Remington R1. I was annoyed that my all blued 1911 had a stainless bushing so I ordered this one. My guess is that the Remington is out of spec rather than the other way around. I could try and have it fitted but that might take the finish off which would defeat the purpose. I'm not going to return it because it's not Brownells fault it didn't fit.

Wilson Combat 1911 Barrel Bushing (29B) (14.04.2018)

Installed this bushing on my Springfield 1911-A1. Very tight fit but finally able to get the slid to cycle freely after cycling it a few dozen times. May remove the bushing and polish the bushing ID with some 1000 grit sand paper on a wood dowel rod.

I think a snug fit bushing could help increase accuracy.

Lesen Sie 8 weitere Bewertungen bei brownells.com

37.9 39.9 3 EUR

Artikel-Nr.: 965029002
WILSON COMBAT WILSON #29S BUSHING
Herstellerproduktnummer: 29S 874218000738 Lässt sich in den meisten 1911 Autos mit wenig bis gar keinem Anpassungsbedarf installieren. Die O.D.s passen gut in die meisten Schlitze. Die blauen und Edelstahlversionen benötigen möglicherweise eine Anpassung.

37.9 EUR 6 37,90 € *

Lieferzeit ca. 14-21 Werktage.
6 Stk. im Lager USA

Eigenschaften: Marke: 1911 Modell: Government Oberfläche: Stainless Steel Style: Drop-In

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Eigenschaften

Marke: 1911 Modell: Government Oberfläche: Stainless Steel Style: Drop-In Versandgewicht: 0,005kg Versandhöhe: 10mm Versandbreite: 74mm Versandlänge: 124mm UPC : 874218000738

Artikel-Nr.: 965029001
WILSON COMBAT WILSON #29B BUSHING
Herstellerproduktnummer: 29B 874218000707 Lässt sich in den meisten 1911 Autos mit wenig bis gar keinem Anpassungsbedarf installieren. Die O.D.s passen gut in die meisten Schlitze. Die blauen und Edelstahlversionen benötigen möglicherweise eine Anpassung.

39.9 EUR 1 39,90 € *

Lieferzeit ca. 14-21 Werktage.
1 Stk. im Lager USA

Eigenschaften: Marke: 1911 Modell: Government Oberfläche: Blued Style: Drop-In

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Artikel-Nr.: 965000049
WILSON COMBAT WILSON #29CO OFFICER'S MODEL BUSHING
Herstellerproduktnummer: 29CO 874218000714 Lässt sich in den meisten 1911 Autos mit wenig bis gar keinem Anpassungsbedarf installieren. Die O.D.s passen gut in die meisten Schlitze. Die blauen und Edelstahlversionen benötigen möglicherweise eine Anpassung.

39.9 EUR 2 39,90 € *

Lieferzeit ca. 14-21 Werktage.
2 Stk. im Lager USA

Eigenschaften: Marke: 1911 Modell: Officers Oberfläche: Stainless Steel Style: Drop-In

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Entdecke die 1911 Barrel Bushing von Wilson Combat! 🔧 Ideal für die meisten 1911 Autos mit einfacher Installation und passgenauer Oberfläche.

Blued Or Stainless, Target Grade

Installs in most 1911 Autos with little to no fitting. O.D.’s fit nicely in most slides. Blued & stainless version may need fitting.

Mehr...

Blau oder Edelstahl, Zielqualität

Mehr...

Kundenbewertungen zu WILSON COMBAT WILSON #29S BUSHING

Anzahl der Bewertungen: 8
Von brownells.com: 8
Durchschnittliche Bewertung: 4,8

Lots of extra metal for a tight fitting (09.04.2011)

very useful product (11.06.2010)

i have a small custom shop,have used several of these, improves acurracy greatly,

Fitting required (14.07.2010)

I had some fitting to do , but my gun is also a Norinco with poor spec. ID and OD had to be trim and polished. Nice look and tight fit, don't forget to get a barrel wrench.

Good quality (13.03.2017)