Available In Two Configurations To Fit Your Specific Shooting Needs
Commander-style hammer, Tactical sear, and Ultra Match disconnector drop-in to deliver reliable ignition and improved trigger function on any 1911 auto. Each component is precision EDM cut to ±.0005" tolerances from Cylinder & Slide’s Special Tool Steel. All parts are honed and polished, then heat-treated to Rc 50-53 for long service life. Tactical II Set features the popular Tactical II chamfered hammer in-the-white with standard .018" long hammer hooks for a match-grade trigger pull. Available in Tool Steel or high-grade Stainless Steel alloy. MARSOC Set includes a blued Tactical II-style hammer with longer .023" hammer hooks for added sear engagement and maximum reliability. Used in the U.S. Marine Corps MARSOC service pistols. Added material on the hooks allows fitting by the pistolsmith to achieve a truly custom trigger pull.
SPECS: Special billet tool steel alloy (TS), hardened to Rc 50-53, or stainless steel (SS), hardened to Rc 50-55, both in-the-white. Sets include hammer, sear, and disconnector. Tactical II – All parts in-the-white. .018” long hammer hooks. MARSOC – Hammer blued, disconnector and sear in-the-white. .023” long hammer hooks.
Mehr...
Verfügbar in zwei Konfigurationen, um deinen spezifischen Schießbedürfnissen gerecht zu werden
Der Commander-Stil Hammer, Tactical Sear und Ultra Match Disconnector sind als Drop-In erhältlich, um eine zuverlässige Zündung und verbesserte Abzugsfunktion bei jedem 1911 Auto zu gewährleisten. Jedes Bauteil ist präzise mit EDM auf ±.0005" Toleranzen aus der speziellen Werkzeugstahl-Legierung von Cylinder & Slide geschnitten. Alle Teile sind geschliffen und poliert und dann auf Rc 50-53 wärmebehandelt für eine lange Lebensdauer. Das Tactical II Set bietet den beliebten, gefasten Hammer in der Rohform mit standardmäßigen .018" langen Hammerhaken für einen Match-Abzug. Erhältlich in Werkzeugstahl oder hochgradiger Edelstahllegierung. Das MARSOC Set enthält einen blauen Tactical II-Stil Hammer mit längeren .023" Hammerhaken für zusätzliche Sear-Beteiligung und maximale Zuverlässigkeit. Verwendet in den Dienstpistolen des U.S. Marine Corps MARSOC. Zusätzliches Material an den Haken ermöglicht eine Anpassung durch den Pistolenmacher, um einen wirklich maßgeschneiderten Abzug zu erreichen.
TECHNISCHE DATEN: Spezielles Billet-Werkzeugstahl-Legierung (TS), gehärtet auf Rc 50-53, oder Edelstahl (SS), gehärtet auf Rc 50-55, beide in der Rohform. Sets enthalten Hammer, Sear und Disconnector. Tactical II – Alle Teile in der Rohform. .018” lange Hammerhaken. MARSOC – Hammer blued, Disconnector und Sear in der Rohform. .023” lange Hammerhaken.
Mehr...
Kundenbewertungen zu CYLINDER & SLIDE MARSOC TRIGGER PULL SET
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 4,8
Worked Perfectly(31.05.2015)
It wasn't really needed but I stoned and polished a few surfaces to my liking. Dropped this in a Sig 1911 to get rid of the ugly hammer and cheap sear. worked great. Absolutely no fitting needed. Even the thumb safety went back in with no fitting. passed all of the safety checks first try. I was very happy with the ease of install, quality of the parts and trigger pull.
super crisp trigger action(30.03.2014)
This kit was installed in my Kimber Target Match .45, a limited edition pistol that doesn't feature a firing pin safety.
The C&S kit didn't allow my pistol to function properly using the disconnector,according to the instructions for safety and operation that came with it.
That was the only con... that problem removed the kit from true "drop in" status and would've required me to take the gun to a professional pistolsmith if I really had to use it.
I used the stock disconnector with the new hammer and sear and the pistol functioned properly and the trigger pull feel is very crisp with absolutely no detectable creep.
I also used the stock Kimber hammer strut and pin, which installed easily with a light tap from a brass hammer. It is not too loose but is also not so tight that I needed to hog out the hole on the hammer.
The gun picked up a disconnector "click" so I then ordered and used the Brownell's Disconnect Scraper, which fixed that little problem and now my .45 has a trigger action that feels like a pro worked on it!
Best value trigger(14.04.2017)
I was going to purchase this as the 5 pcs but turns out its cheaper to buy the 3 pcs and the sear spring separately along with the ed brown mainspring kit ( plus you get 5 main spring instead of 1).
Anyhow, onto the trigger kit itself. This dropped into both my sig 1911 tacops and norinco 1911. On the sig, this actually does not required me to re-fit the thumb safety and it function properly. On the norinco however, it did required me to fit a new thumb safety and it had too much play. Ymmv because every frame is different on a 1911.
The sig did not produce as big of an improvement mainly due to the series 80 safety system in place and only eliminated the creep that was in the factory trigger, i guess either sig uses a very good trigger from the factory or that the sig's trigger its at its limit due to the 80 series safety lever and plunger.
However on the norinco, this kit vastly improved the trigger system because the norinco trigger was at best " dragging your finger across sandpaper" feel to it. This kit removed all creeps, grits and a bit of pre-travel from the original trigger. In the norinco, i would say its 90% of the trigger feel of the Sig.
The hammer and strut took some wiggling to get the pin in, but when it did it fit nicely. Seems to have cut the trigger weight in half.
Excellent Drop in Trigger(19.02.2012)
I bought this trigger set to create a faithful replica of the current variations of the MEU SOC 45. I have used various kits in the past on both personal pistols, clients' pistols, and friends' pistols and this kit by far has yielded the best creep-free pull right out of the box.
There is one caveat: the hammer strut pin hole is undersized. I used a round hobby file and lightly opened up the hole and banged the pin through. Excellent parts, excellent pull all on an excellent pistol.
Excellent Set, However...(26.03.2018)
This set is the 1:1 set used in the USMC's MEUSOC pistols. It's pleasing to the eye and set to great tolerance. However, something the website does NOT tell you is about the warning in the package.
This is meant to be precision-fitted and stoned to finish. There is no relief angle and the hammer has slightly longer hooks than normal drop-in kits. What does this mean? That means your sear nose engagement is going to be more pronounced, meaning that while you have a good, crisp break, it will be heavy; about 5 lbs. heavy.
While the warning advised that this set is NOT drop-in, I used it as such anyway. I noticed the trigger was as heavy as my stock trigger, but for a gun that isn't meant for match use, this was not a huge concern.
This trigger set is precision machined and is well worth the price, however don't expect 3lb. match quality unless you take the time to stone the sear yourself.
Artikel-Nr.: 206000038 CYLINDER & SLIDE MARSOC TRIGGER PULL SET Herstellerproduktnummer: CS0271B000000002714 Der Commander-Stil Hammer, Tactical Sear und Ultra Match Disconnector sind als Drop-In erhältlich, um eine zuverlässige Zündung und verbesserte Abzugsfunktion bei jedem 1911 Auto zu gewährleisten. Jedes Bauteil ist präzise mit EDM auf ±.0005" Toleranzen aus der speziellen Werkzeugstahl-Legierung von Cylinder & Slide geschnitten. Alle Teile sind geschliffen und poliert und dann auf Rc 50-53 wärmebehandelt für eine lange Lebensdauer. Das Tactical II Set bietet den beliebten, gefasten Hammer in der Rohform mit standardmäßigen .018" langen Hammerhaken für einen Match-Abzug. Erhältlich in Werkzeugstahl oder hochgradiger Edelstahllegierung. Das MARSOC Set enthält einen blauen Tactical II-Stil Hammer mit längeren .023" Hammerhaken für zusätzliche Sear-Beteiligung und maximale Zuverlässigkeit. Verwendet in den Dienstpistolen des U.S. Marine Corps MARSOC. Zusätzliches Material an den Haken ermöglicht eine Anpassung durch den Pistolenmacher, um einen wirklich maßgeschneiderten Abzug zu erreichen.
189.9EUR0189,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
US-Exportklassifizierung: 0A501.c
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Artikel-Nr.: 206000034 CYLINDER & SLIDE TACTICAL II TRIGGER PULL SET Herstellerproduktnummer: CS0208000000002080 Der Commander-Stil Hammer, Tactical Sear und Ultra Match Disconnector sind als Drop-In erhältlich, um eine zuverlässige Zündung und verbesserte Abzugsfunktion bei jedem 1911 Auto zu gewährleisten. Jedes Bauteil ist präzise mit EDM auf ±.0005" Toleranzen aus der speziellen Werkzeugstahl-Legierung von Cylinder & Slide geschnitten. Alle Teile sind geschliffen und poliert und dann auf Rc 50-53 wärmebehandelt für eine lange Lebensdauer. Das Tactical II Set bietet den beliebten, gefasten Hammer in der Rohform mit standardmäßigen .018" langen Hammerhaken für einen Match-Abzug. Erhältlich in Werkzeugstahl oder hochgradiger Edelstahllegierung. Das MARSOC Set enthält einen blauen Tactical II-Stil Hammer mit längeren .023" Hammerhaken für zusätzliche Sear-Beteiligung und maximale Zuverlässigkeit. Verwendet in den Dienstpistolen des U.S. Marine Corps MARSOC. Zusätzliches Material an den Haken ermöglicht eine Anpassung durch den Pistolenmacher, um einen wirklich maßgeschneiderten Abzug zu erreichen.
174.9EUR0174,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Artikel-Nr.: 206000057 CYLINDER & SLIDE 1911 TACTICAL II HAMMER SET, SS Herstellerproduktnummer: CS0211 Der Commander-Stil Hammer, Tactical Sear und Ultra Match Disconnector sind als Drop-In erhältlich, um eine zuverlässige Zündung und verbesserte Abzugsfunktion bei jedem 1911 Auto zu gewährleisten. Jedes Bauteil ist präzise mit EDM auf ±.0005" Toleranzen aus der speziellen Werkzeugstahl-Legierung von Cylinder & Slide geschnitten. Alle Teile sind geschliffen und poliert und dann auf Rc 50-53 wärmebehandelt für eine lange Lebensdauer. Das Tactical II Set bietet den beliebten, gefasten Hammer in der Rohform mit standardmäßigen .018" langen Hammerhaken für einen Match-Abzug. Erhältlich in Werkzeugstahl oder hochgradiger Edelstahllegierung. Das MARSOC Set enthält einen blauen Tactical II-Stil Hammer mit längeren .023" Hammerhaken für zusätzliche Sear-Beteiligung und maximale Zuverlässigkeit. Verwendet in den Dienstpistolen des U.S. Marine Corps MARSOC. Zusätzliches Material an den Haken ermöglicht eine Anpassung durch den Pistolenmacher, um einen wirklich maßgeschneiderten Abzug zu erreichen.
199.9EUR0199,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Available In Two Configurations To Fit Your Specific Shooting Needs
Commander-style hammer, Tactical sear, and Ultra Match disconnector drop-in to deliver reliable ignition and improved trigger function on any 1911 auto. Each component is precision EDM cut to ±.0005" tolerances from Cylinder & Slide’s Special Tool Steel. All parts are honed and polished, then heat-treated to Rc 50-53 for long service life. Tactical II Set features the popular Tactical II chamfered hammer in-the-white with standard .018" long hammer hooks for a match-grade trigger pull. Available in Tool Steel or high-grade Stainless Steel alloy. MARSOC Set includes a blued Tactical II-style hammer with longer .023" hammer hooks for added sear engagement and maximum reliability. Used in the U.S. Marine Corps MARSOC service pistols. Added material on the hooks allows fitting by the pistolsmith to achieve a truly custom trigger pull.
SPECS: Special billet tool steel alloy (TS), hardened to Rc 50-53, or stainless steel (SS), hardened to Rc 50-55, both in-the-white. Sets include hammer, sear, and disconnector. Tactical II – All parts in-the-white. .018” long hammer hooks. MARSOC – Hammer blued, disconnector and sear in-the-white. .023” long hammer hooks.
Mehr...
Verfügbar in zwei Konfigurationen, um deinen spezifischen Schießbedürfnissen gerecht zu werden
Der Commander-Stil Hammer, Tactical Sear und Ultra Match Disconnector sind als Drop-In erhältlich, um eine zuverlässige Zündung und verbesserte Abzugsfunktion bei jedem 1911 Auto zu gewährleisten. Jedes Bauteil ist präzise mit EDM auf ±.0005" Toleranzen aus der speziellen Werkzeugstahl-Legierung von Cylinder & Slide geschnitten. Alle Teile sind geschliffen und poliert und dann auf Rc 50-53 wärmebehandelt für eine lange Lebensdauer. Das Tactical II Set bietet den beliebten, gefasten Hammer in der Rohform mit standardmäßigen .018" langen Hammerhaken für einen Match-Abzug. Erhältlich in Werkzeugstahl oder hochgradiger Edelstahllegierung. Das MARSOC Set enthält einen blauen Tactical II-Stil Hammer mit längeren .023" Hammerhaken für zusätzliche Sear-Beteiligung und maximale Zuverlässigkeit. Verwendet in den Dienstpistolen des U.S. Marine Corps MARSOC. Zusätzliches Material an den Haken ermöglicht eine Anpassung durch den Pistolenmacher, um einen wirklich maßgeschneiderten Abzug zu erreichen.
TECHNISCHE DATEN: Spezielles Billet-Werkzeugstahl-Legierung (TS), gehärtet auf Rc 50-53, oder Edelstahl (SS), gehärtet auf Rc 50-55, beide in der Rohform. Sets enthalten Hammer, Sear und Disconnector. Tactical II – Alle Teile in der Rohform. .018” lange Hammerhaken. MARSOC – Hammer blued, Disconnector und Sear in der Rohform. .023” lange Hammerhaken.
Mehr...
Kundenbewertungen zu CYLINDER & SLIDE MARSOC TRIGGER PULL SET
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 4,8
Worked Perfectly(31.05.2015)
It wasn't really needed but I stoned and polished a few surfaces to my liking. Dropped this in a Sig 1911 to get rid of the ugly hammer and cheap sear. worked great. Absolutely no fitting needed. Even the thumb safety went back in with no fitting. passed all of the safety checks first try. I was very happy with the ease of install, quality of the parts and trigger pull.
super crisp trigger action(30.03.2014)
This kit was installed in my Kimber Target Match .45, a limited edition pistol that doesn't feature a firing pin safety.
The C&S kit didn't allow my pistol to function properly using the disconnector,according to the instructions for safety and operation that came with it.
That was the only con... that problem removed the kit from true "drop in" status and would've required me to take the gun to a professional pistolsmith if I really had to use it.
I used the stock disconnector with the new hammer and sear and the pistol functioned properly and the trigger pull feel is very crisp with absolutely no detectable creep.
I also used the stock Kimber hammer strut and pin, which installed easily with a light tap from a brass hammer. It is not too loose but is also not so tight that I needed to hog out the hole on the hammer.
The gun picked up a disconnector "click" so I then ordered and used the Brownell's Disconnect Scraper, which fixed that little problem and now my .45 has a trigger action that feels like a pro worked on it!
Best value trigger(14.04.2017)
I was going to purchase this as the 5 pcs but turns out its cheaper to buy the 3 pcs and the sear spring separately along with the ed brown mainspring kit ( plus you get 5 main spring instead of 1).
Anyhow, onto the trigger kit itself. This dropped into both my sig 1911 tacops and norinco 1911. On the sig, this actually does not required me to re-fit the thumb safety and it function properly. On the norinco however, it did required me to fit a new thumb safety and it had too much play. Ymmv because every frame is different on a 1911.
The sig did not produce as big of an improvement mainly due to the series 80 safety system in place and only eliminated the creep that was in the factory trigger, i guess either sig uses a very good trigger from the factory or that the sig's trigger its at its limit due to the 80 series safety lever and plunger.
However on the norinco, this kit vastly improved the trigger system because the norinco trigger was at best " dragging your finger across sandpaper" feel to it. This kit removed all creeps, grits and a bit of pre-travel from the original trigger. In the norinco, i would say its 90% of the trigger feel of the Sig.
The hammer and strut took some wiggling to get the pin in, but when it did it fit nicely. Seems to have cut the trigger weight in half.
Excellent Drop in Trigger(19.02.2012)
I bought this trigger set to create a faithful replica of the current variations of the MEU SOC 45. I have used various kits in the past on both personal pistols, clients' pistols, and friends' pistols and this kit by far has yielded the best creep-free pull right out of the box.
There is one caveat: the hammer strut pin hole is undersized. I used a round hobby file and lightly opened up the hole and banged the pin through. Excellent parts, excellent pull all on an excellent pistol.
Excellent Set, However...(26.03.2018)
This set is the 1:1 set used in the USMC's MEUSOC pistols. It's pleasing to the eye and set to great tolerance. However, something the website does NOT tell you is about the warning in the package.
This is meant to be precision-fitted and stoned to finish. There is no relief angle and the hammer has slightly longer hooks than normal drop-in kits. What does this mean? That means your sear nose engagement is going to be more pronounced, meaning that while you have a good, crisp break, it will be heavy; about 5 lbs. heavy.
While the warning advised that this set is NOT drop-in, I used it as such anyway. I noticed the trigger was as heavy as my stock trigger, but for a gun that isn't meant for match use, this was not a huge concern.
This trigger set is precision machined and is well worth the price, however don't expect 3lb. match quality unless you take the time to stone the sear yourself.