Built to the very highest standards for the no-fail performance competitive and self-defense shooters demand. Feed lips are roll-formed and polished, not die cut, for added strength, and Chip’s follower design provides flawless feeding with semi-wadcutters and hollow points. Powerful spring of proprietary, heat-treated Rocket Wire further ensures reliable feeding, even when left fully loaded and seated in a pistol for extended periods. Removable plastic base pad with full, front-to-back engagement, is built to withstand continual use, and numbered witness holes on both sides of the body provide a fast, visible round count. Long-body 10-round model has base pad that wraps around exposed portion of magazine that extends beyond mag well. Power Plus models have an advanced anti-tilt follower for even more stable support of the round stack—extra insurance that every round feeds, first to last. Replacement Power Mag Springs and Followers available separately.
SPECS: Stainless steel body and follower. .45 ACP, fits 1911 Auto only. Mag. 10 - 10-round capacity.
Mehr...
Premium, Zuverlässige Eigenschaften Plus Zusätzliche Schüsse
Hergestellt nach höchsten Standards für die zuverlässige Leistung, die Wettkampf- und Selbstverteidigungsschützen verlangen. Die Zuführlippen sind gerollt und poliert, nicht gestanzt, für zusätzliche Stärke, und Chips Follower-Design sorgt für einwandfreies Zuführen von Semi-Wadcuttern und Hollow Points. Die leistungsstarke Feder aus proprietärem, wärmebehandeltem Rocket Wire gewährleistet zusätzlich eine zuverlässige Zuführung, selbst wenn das Magazin über längere Zeit vollständig geladen und in einer Pistole sitzt. Abnehmbarer Kunststoff-Boden mit vollständiger, frontaler Engagement ist für den dauerhaften Einsatz gebaut, und nummerierte Sichtlöcher auf beiden Seiten des Gehäuses bieten eine schnelle, sichtbare Rundenzahl. Das lange 10-Schuss-Modell hat einen Boden, der den freiliegenden Teil des Magazins umschließt, der über den Magazinschacht hinausgeht. Power Plus-Modelle verfügen über einen fortschrittlichen Anti-Kipp-Follower für noch stabilere Unterstützung des Rundstapels – zusätzliche Sicherheit, dass jede Patrone von der ersten bis zur letzten zugeführt wird. Ersatz Power Mag Federn und Follower sind separat erhältlich.
TECHNISCHE DATEN: Gehäuse und Follower aus rostfreiem Stahl. .45 ACP, passt nur für 1911 Auto. Mag. 10 - 10-Schuss Kapazität.
Mehr...
Kundenbewertungen zu CHIP MCCORMICK CUSTOM POWER MAG PLUS, .45 ACP, 10 ROUND, STAINLESS
Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 3,8
Great Magazine!(19.08.2009)
Chip McCormick makes great magazines. I've had mine for just over 10,000 rounds (split between 5) with no real problems. Droping them repeatedly will of course damage the feed lips, but you can expect that with any magazine.
The plastic base pad removes easily for cleaning, but will have to be modified for use with flared magazine wells (it's easy and just requires removing a little plastic to allow full insertion of the magazine).
Works great; Carry is a Challenge(27.12.2009)
Planning on use as a backup mag for concealed carry to give a couple extra rounds. I've had a challenge finding a flip top magazine holster with a tab long enough to velcro down the tab after passing over the length of the mag. I prefer this type magazine holster as it looks much like a pocket knife, versus a open top mag holster. I'll keep looking, as the mag performs well.
Superior in competition(02.07.2010)
I own 8 of these which I use in competition shooting. (PPC, IPSC, FIELD etc) They are reliable and superior to any alternative brand I have tried. I have somewhere above 100.000 .45acp+P rounds through these and virtually no hickups in my 1911 (Les Baer) Two of them did not hookup slide when last round emptied, but solved through a mild massage of the feed lips. I did also polish them for a smoother surface than factory for smoother speed reloading, and it helped me out further in speed.
Not highly, but highest recommended magazines availible...
Perfect!(27.09.2010)
I needed a 10 round magazine for my Para LTC to use for bowling pin league. I ran 100 rounds through it over the weekend for testing and it performed flawlessly. This will shave 2-3 seconds per station since I no longer have to change magazines.
1st rnd. malf everytime on closed slide(29.01.2011)
So far, not so impressed. The follower is not a "shooting star" type follower, but a shorter follower that causes hollow points and cast swc rounds to nose dive before they make it to the feed ramp on the first round with the slide forward. Slide back reloads and these feed fine. The "correct" follower is a 6$ replacement part. So simply pick one of those up for each mag unless shooting ball only...
#12150 POWER 10 PLUS MAGAZINE by CHIP MC(23.08.2011)
BEST MAGS ON THE MARKET... GREAT QUALITY, POSITIVE FEEDING. IF THESE MAGS DONE WORK FOR YOU LOOK AT THE AMMO OR YOUR RAMP...GOOD FLOOR PLATES, COMPLETLEY REBUILDABLE. I HAVE HAD SOME FOR 10 YEARS, ALL I HAVE EVER DONE IS REPLACE THE SPRINGS. I HAVE TRIED MANY OTHER BRANDS, GOOD MAGS ARE NOT CHEAP, CHEAP MAGS ARE NOT GOOD.
Not happy.(09.04.2015)
I have the chip McCormick 8 round magazines, never had a
single problem with them in my old 70 series colt, didnt matter
what type of ammo was shot through it so I bought 3 of these.
never had so many feed problems, stove piping issues, didnt
matter what type of ammo I tried. and what is the deal with the followers flipping up and the springs, popping out?
Starting to doubt these(26.07.2015)
Have 6 of them for a semi custom SA/Caspian build. Continuing to have a high rate of FTF past normal break in of pistol. Have identified one proven bad mag of the lot which had 1-2 FTF per mag fired and would not lock the slide back. As an objective related comment...I have NEVER had such problems with WC mags. Thinking I should have just stuck with WC at this point.
Best quality 1911 mags(07.11.2016)
This has by far 1 of the best mags ever made for 1911. I have used wilson combat, nighthawk, and tripp. This has a real solid design and the follower do not drag on the bottom of the slide.
The on sale price makes it a very attractive choice.
This mag will also fit a sig tac ops with the factory magwell. No fitment isssues on mine.
Power Plus Magazine, 10-Round (23.01.2018)
I bought 5 of these magazines and from the start they have given me nothing but problems. The followers in them tip over and the rounds jam up. I get one to two jams for each ten rounds. These are junk. I have a new Kimber warrior which has no issues with other magazines. Wilson Combat has made a new version of this mag with a much better designed follower and railed feed lips. Buy those, these are junk.
Artikel-Nr.: 207000025 CHIP MCCORMICK CUSTOM POWER MAG PLUS, .45 ACP, 10 ROUND, STAINLESS Herstellerproduktnummer: M-PMP-45FS10705263121508 Hergestellt nach höchsten Standards für die zuverlässige Leistung, die Wettkampf- und Selbstverteidigungsschützen verlangen. Die Zuführlippen sind gerollt und poliert, nicht gestanzt, für zusätzliche Stärke, und Chips Follower-Design sorgt für einwandfreies Zuführen von Semi-Wadcuttern und Hollow Points. Die leistungsstarke Feder aus proprietärem, wärmebehandeltem Rocket Wire gewährleistet zusätzlich eine zuverlässige Zuführung, selbst wenn das Magazin über längere Zeit vollständig geladen und in einer Pistole sitzt. Abnehmbarer Kunststoff-Boden mit vollständiger, frontaler Engagement ist für den dauerhaften Einsatz gebaut, und nummerierte Sichtlöcher auf beiden Seiten des Gehäuses bieten eine schnelle, sichtbare Rundenzahl. Das lange 10-Schuss-Modell hat einen Boden, der den freiliegenden Teil des Magazins umschließt, der über den Magazinschacht hinausgeht. Power Plus-Modelle verfügen über einen fortschrittlichen Anti-Kipp-Follower für noch stabilere Unterstützung des Rundstapels – zusätzliche Sicherheit, dass jede Patrone von der ersten bis zur letzten zugeführt wird. Ersatz Power Mag Federn und Follower sind separat erhältlich.
59.9EUR1559,90 €
*
Lieferzeit ca. 14-21 Werktage. Mehr als 10 Stk. im Lager USA
US-Exportklassifizierung: 0A501.x
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Built to the very highest standards for the no-fail performance competitive and self-defense shooters demand. Feed lips are roll-formed and polished, not die cut, for added strength, and Chip’s follower design provides flawless feeding with semi-wadcutters and hollow points. Powerful spring of proprietary, heat-treated Rocket Wire further ensures reliable feeding, even when left fully loaded and seated in a pistol for extended periods. Removable plastic base pad with full, front-to-back engagement, is built to withstand continual use, and numbered witness holes on both sides of the body provide a fast, visible round count. Long-body 10-round model has base pad that wraps around exposed portion of magazine that extends beyond mag well. Power Plus models have an advanced anti-tilt follower for even more stable support of the round stack—extra insurance that every round feeds, first to last. Replacement Power Mag Springs and Followers available separately.
SPECS: Stainless steel body and follower. .45 ACP, fits 1911 Auto only. Mag. 10 - 10-round capacity.
Mehr...
Premium, Zuverlässige Eigenschaften Plus Zusätzliche Schüsse
Hergestellt nach höchsten Standards für die zuverlässige Leistung, die Wettkampf- und Selbstverteidigungsschützen verlangen. Die Zuführlippen sind gerollt und poliert, nicht gestanzt, für zusätzliche Stärke, und Chips Follower-Design sorgt für einwandfreies Zuführen von Semi-Wadcuttern und Hollow Points. Die leistungsstarke Feder aus proprietärem, wärmebehandeltem Rocket Wire gewährleistet zusätzlich eine zuverlässige Zuführung, selbst wenn das Magazin über längere Zeit vollständig geladen und in einer Pistole sitzt. Abnehmbarer Kunststoff-Boden mit vollständiger, frontaler Engagement ist für den dauerhaften Einsatz gebaut, und nummerierte Sichtlöcher auf beiden Seiten des Gehäuses bieten eine schnelle, sichtbare Rundenzahl. Das lange 10-Schuss-Modell hat einen Boden, der den freiliegenden Teil des Magazins umschließt, der über den Magazinschacht hinausgeht. Power Plus-Modelle verfügen über einen fortschrittlichen Anti-Kipp-Follower für noch stabilere Unterstützung des Rundstapels – zusätzliche Sicherheit, dass jede Patrone von der ersten bis zur letzten zugeführt wird. Ersatz Power Mag Federn und Follower sind separat erhältlich.
TECHNISCHE DATEN: Gehäuse und Follower aus rostfreiem Stahl. .45 ACP, passt nur für 1911 Auto. Mag. 10 - 10-Schuss Kapazität.
Mehr...
Kundenbewertungen zu CHIP MCCORMICK CUSTOM POWER MAG PLUS, .45 ACP, 10 ROUND, STAINLESS
Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 3,8
Great Magazine!(19.08.2009)
Chip McCormick makes great magazines. I've had mine for just over 10,000 rounds (split between 5) with no real problems. Droping them repeatedly will of course damage the feed lips, but you can expect that with any magazine.
The plastic base pad removes easily for cleaning, but will have to be modified for use with flared magazine wells (it's easy and just requires removing a little plastic to allow full insertion of the magazine).
Works great; Carry is a Challenge(27.12.2009)
Planning on use as a backup mag for concealed carry to give a couple extra rounds. I've had a challenge finding a flip top magazine holster with a tab long enough to velcro down the tab after passing over the length of the mag. I prefer this type magazine holster as it looks much like a pocket knife, versus a open top mag holster. I'll keep looking, as the mag performs well.
Superior in competition(02.07.2010)
I own 8 of these which I use in competition shooting. (PPC, IPSC, FIELD etc) They are reliable and superior to any alternative brand I have tried. I have somewhere above 100.000 .45acp+P rounds through these and virtually no hickups in my 1911 (Les Baer) Two of them did not hookup slide when last round emptied, but solved through a mild massage of the feed lips. I did also polish them for a smoother surface than factory for smoother speed reloading, and it helped me out further in speed.
Not highly, but highest recommended magazines availible...
Perfect!(27.09.2010)
I needed a 10 round magazine for my Para LTC to use for bowling pin league. I ran 100 rounds through it over the weekend for testing and it performed flawlessly. This will shave 2-3 seconds per station since I no longer have to change magazines.
1st rnd. malf everytime on closed slide(29.01.2011)
So far, not so impressed. The follower is not a "shooting star" type follower, but a shorter follower that causes hollow points and cast swc rounds to nose dive before they make it to the feed ramp on the first round with the slide forward. Slide back reloads and these feed fine. The "correct" follower is a 6$ replacement part. So simply pick one of those up for each mag unless shooting ball only...
#12150 POWER 10 PLUS MAGAZINE by CHIP MC(23.08.2011)
BEST MAGS ON THE MARKET... GREAT QUALITY, POSITIVE FEEDING. IF THESE MAGS DONE WORK FOR YOU LOOK AT THE AMMO OR YOUR RAMP...GOOD FLOOR PLATES, COMPLETLEY REBUILDABLE. I HAVE HAD SOME FOR 10 YEARS, ALL I HAVE EVER DONE IS REPLACE THE SPRINGS. I HAVE TRIED MANY OTHER BRANDS, GOOD MAGS ARE NOT CHEAP, CHEAP MAGS ARE NOT GOOD.
Not happy.(09.04.2015)
I have the chip McCormick 8 round magazines, never had a
single problem with them in my old 70 series colt, didnt matter
what type of ammo was shot through it so I bought 3 of these.
never had so many feed problems, stove piping issues, didnt
matter what type of ammo I tried. and what is the deal with the followers flipping up and the springs, popping out?
Starting to doubt these(26.07.2015)
Have 6 of them for a semi custom SA/Caspian build. Continuing to have a high rate of FTF past normal break in of pistol. Have identified one proven bad mag of the lot which had 1-2 FTF per mag fired and would not lock the slide back. As an objective related comment...I have NEVER had such problems with WC mags. Thinking I should have just stuck with WC at this point.
Best quality 1911 mags(07.11.2016)
This has by far 1 of the best mags ever made for 1911. I have used wilson combat, nighthawk, and tripp. This has a real solid design and the follower do not drag on the bottom of the slide.
The on sale price makes it a very attractive choice.
This mag will also fit a sig tac ops with the factory magwell. No fitment isssues on mine.
Power Plus Magazine, 10-Round (23.01.2018)
I bought 5 of these magazines and from the start they have given me nothing but problems. The followers in them tip over and the rounds jam up. I get one to two jams for each ten rounds. These are junk. I have a new Kimber warrior which has no issues with other magazines. Wilson Combat has made a new version of this mag with a much better designed follower and railed feed lips. Buy those, these are junk.