Der verlängerte Magazine Release erleichtert das schnelle Wechseln der Magazine.
Die kompakte Form stört nicht beim Tragen des Gewehrs in einer Tragetasche.
Einfach zu installieren, ohne dass Büchsenmacherarbeiten nötig sind.
Eigenschaften
Modell:10/22
Waffentyp:Ruger
Versandgewicht:0,023kg
Versandhöhe:13mm
Versandbreite:18mm
Versandlänge:94mm
Artikeldetails
US-Exportklassifizierung: 0A501.x
Spezifikationen:
Marke: Ruger
Modell: 10/22
39.939.91EUR
39.9EUR39,90 €
Preise inkl. MwSt., zzgl. Versand
Artikel-Nr.: 746122100
Herst.-Nr.: NONE
Verlängert sich einen halben Zoll weiter als der "flush"-Werksteilauslöser, sodass du ihn leichter erreichen und bedienen kannst, wenn du in Eile bist, die Magazine zu wechseln. Die dünne, kompakte Form sticht dir nicht in den Rücken, wenn du dein Gewehr im Tragegurt transportierst. Lässt sich ohne Büchsenmacherei installieren.
Auf Lager
Lieferzeit ca. 14-21 Werktage. Mehr als 10 Stk. im Lager USA
Lieferzeit ca. 14-21 Werktage. Mehr als 10 Stk. im Lager USA
Compact Shape Is Faster To Hit; Won't Get In The Way
Extends half an inch farther out than the "flush" factory release so it's easier to hit and operate when you're in a hurry to change magazines. Thin, compact shape won't poke you in the back if you carry your rifle in a sling. Installs without gunsmithing.
SPECS: CM steel, blue, matte finish. Extends .430" (11mm) from bottom of receiver.
Kompakte Form Ist Schneller Zu Treffen; Stört Nicht
Verlängert sich einen halben Zoll weiter als der "flush"-Werksteilauslöser, sodass du ihn leichter erreichen und bedienen kannst, wenn du in Eile bist, die Magazine zu wechseln. Die dünne, kompakte Form sticht dir nicht in den Rücken, wenn du dein Gewehr im Tragegurt transportierst. Lässt sich ohne Büchsenmacherei installieren.
TECHNISCHE DATEN: CM-Stahl, blau, matte Oberfläche. Verlängert sich um .430" (11mm) vom unteren Ende des Empfängers.
Top Takeaways
Der verlängerte Magazine Release erleichtert das schnelle Wechseln der Magazine.
Die kompakte Form stört nicht beim Tragen des Gewehrs in einer Tragetasche.
Einfach zu installieren, ohne dass Büchsenmacherarbeiten nötig sind.
Eigenschaften
Modell:10/22
Waffentyp:Ruger
Versandgewicht:0,023kg
Versandhöhe:13mm
Versandbreite:18mm
Versandlänge:94mm
Artikeldetails
US-Exportklassifizierung: 0A501.x
Kundenbewertungen
Kundenbewertungen (12)
4,3 / 5
Empfehlenswert
Works well, but dimensions are small. 05.09.2018
Good quality and very sturdy. It functions very well, not too long and not too short. My only issue is the dimensions are on the small side, making the part sit loosely in the trigger. It even rattles. Even when a magazine is inserted it will rattle. This could give away your position if your sneaking up on game. Other than that it works.
Empfehlenswert
Much needed upgrade 20.02.2017
Solid replacement for the flimsy plastic and far too small original release.
Easy to swap out and SOLID.
Only gripe is the edge seeing that the mag release and bolt release are in tight quarters. The edges are not sharp per say but would serve tiny and weaker hands much better to be rounded out. I am not a small shooter nor have weak hands and this is an annoyance for me.
A side note, I will never buy Ruger again!!!! the "need" for this product and others on the 10-22 are ridiculous. The 10-22 is supposed to be one of the most reliable platforms in existance and was purchaed for a new shooter. I have had to perform more modifications and cleaning up from a lack of proper fit or finish due to Ruger manufacturing.
Sehr empfehlenswert
What was looking for 29.11.2016
Looking for one like for some years now for my Oct 1994 model 10/22 , easy to install , works perfect, does not get bumped , easy to work, even looks factory
Empfehlenswert
Great design, will last a lifetime 04.01.2014
All steel, dimensionally perfect for hi-cap magazines. This is the only mag catch that I tried to accommodate the Pro-Mag Archangel Nomad magzine with sleeve, except the vintage Eagle polymer magazine catch of the 1980's. I would have given it a 5-star if the part has been serrated for non-slip operation and aesthetics. I have added a 20 l.p.i. on the paddle and it work even better and looks phenomenal. Excellent price tag.
Sehr empfehlenswert
Great product! 13.06.2012
It took longer to break the rifle down than it did to install this part. This was a nice addition to 1993 10/22 that had the flush magazine release. No issues now releasing magazines in my 10/22.
Sehr empfehlenswert
Greatly eases releasing a magazine 19.10.2011
Factory magazine release was stiff and did not drop the magazine easily, had to get a good grip on the magazine and pull or flip it out with a screw driver/car key. This magazine release is as easy as pushing the lever with a knuckle and the magazine will drop free. Basically how the factory release should be, I highly recommend this to anyone with a 10/22.
Wenig empfehlenswert
10/22 SS Ext. Mag Release 02.10.2011
Firstly, easy to install. Ejects magazines without effort. However, the corners are sure to poke you pretty hard. It could use some buffing out because if you look at the photo, which I didn't, there are a lot of tool marks. But you won't see it once it's installed but I can see what looks like a cracks or other squiggy looking folds. Is this part a casting poured from a mold?
Sehr empfehlenswert
vast improvement over stock mag. release 18.06.2011
This mag release is a great improvement to the stock mag release that is flush with the rifle. Easy installation, better feel than polymer.
Empfehlenswert
Working as expected 02.02.2011
Easy to install and works like expected.
Sehr empfehlenswert
Very good for older 10/22's 10.09.2010
Older 10/22's need these releases. Maybe that's why new ones come with similar ones installed?
Only one problem: The description said it is blued, but mine is parkerized. Not a problem, but (barely) worth noting. Parkerized steel is more rust-resistant than blued.
Empfehlenswert
Size is decieving 28.08.2010
When I first recieved this part I was dissapointed because it was smaller than the original mag release, but once I installed it I noticed that it was much easier and less finicky than the original.
Sehr empfehlenswert
Work's great 10.04.2010
Installs easy, works goood, just a flick of your finger and the mag. drops. Good product and the price is right.
Brownells Austria GmbH
Hauptstraße 13-15
2332 Hennersdorf
Österreich
info@brownells.at
Zuletzt gesehen
Ups! Da ist etwas schiefgelaufen.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.
Erlebe den 10/22® Extended Magazine Release von RANCH PRODUCTS! 🔧 Einfacher Wechsel, kompakt und ohne Waffenbauarbeiten. Ideal für dich!
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Die Enhanced Magazine Plate fügt zwei weitere Patronen zur Kapazität deiner Glock® 42 hinzu.
Sie bietet eine erweiterte Griffoberfläche für bessere Kontrolle und Genauigkeit beim Schießen.
Hergestellt aus schlagfestem Hartpolymer mit einer aggressiven Textur für verbesserten Halt.
Die MDT Comp Muzzle Brake bietet eine effektive Rückstoßreduzierung und minimale Erschütterung für den Schützen.
Mit einstellbaren Ports und strategisch platzierten "Disruptor"-Ports wird der Gasfluss optimal geleitet.
Optimiert für gängige PRS-Kaliber und aus hochfestem, nitridiertem Stahl gefertigt.