No need to drill and tap a rock-hard Springfield with this No-Drill, No-Tap Mount. No need to bend the bolt, a simple grinding of the bolt handle for clearance is all that’s needed. Blends in well with original finish. Will not fit the 1903/1903 Mark I.
SPECS: Alum., black, anodized. Uses standard Weaver-style 1" (2.5cm) rings, not supplied. Wt. 3 oz. (85 g). 5-5⁄16" (13.5cm) long.
Mehr...
Kein Bohren und Gewindeschneiden an einem extrem harten Springfield notwendig mit dieser No-Drill, No-Tap Halterung. Es ist nicht nötig, den Bolzen zu biegen; eine einfache Bearbeitung des Bolzenhandgriffs für den nötigen Platz reicht aus. Passt gut zum ursprünglichen Finish. Passt nicht auf den 1903/1903 Mark I.
SPECS: Aluminium, schwarz, anodisiert. Verwendet Standard-Weaver-Stil 1" (2,5 cm) Ringe, nicht im Lieferumfang enthalten. Gewicht: 3 oz. (85 g). 5-5⁄16" (13,5 cm) lang.
Mehr...
Kundenbewertungen zu S&K 1903 A3 SPRINGFIELD DOVETAIL IN REAR (WEAVER)
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 4,8
Nice product(22.11.2011)
This no gunsmithing mount works as advertised but you may have to do minor trimming of the handguard as it will be too long "IF" you use the handguard retaining ring. Stock will also have to be notched slightly if you use the handguard retaining ring as the mount slightly pushes it forward. I bought an extra handguard and saved my original. You can find them cheap online.
Easy to install, secure(10.07.2012)
Easy to install on my Springfield M1903-A3. Had to use a dremmel on my stock to make the ring around the barrel for the front mount to fit. It was a synthetic stock so it only took 30 minutes to make it a nice fit. Fits very tight and secure.
every install is different(25.03.2013)
had to cut top foreend piece shorter,then fiqure a way to secure it to stock from moving side to side.
update on first review(31.03.2013)
I ended up reuseing the stock ring.With a little extra thought,I cut the upper portion of the stock about a quarter of an inch shorter,and used a dremmel tool to fit.Great tool!I bought Accushot Premium 1-inch Weaver Style See-Thru Medium Profile Rings.The bolt handle clears the scope by 3/16 inch.I installed a Tasco Varmint 2.5-10x 42mm True Mil-Dot Reticle,1/4 MOA Turrets Riflescope.Looks great.
Ease of installation(02.11.2013)
Mounted easy, great design! Brownell your the greatest too. Ordered this product at 3:00 on the 28th of Oct. Received it the 30th. Thanks for a great transaction!!!!!!!!!!!!!!!!!!!
s&k 03a3 mount(11.04.2015)
This is great product easy to install looks good on the rifle
Artikel-Nr.: 794001033 S&K 1903 A3 SPRINGFIELD DOVETAIL IN REAR (WEAVER) Herstellerproduktnummer: 1570 Kein Bohren und Gewindeschneiden an einem extrem harten Springfield notwendig mit dieser No-Drill, No-Tap Halterung. Es ist nicht nötig, den Bolzen zu biegen; eine einfache Bearbeitung des Bolzenhandgriffs für den nötigen Platz reicht aus. Passt gut zum ursprünglichen Finish. Passt nicht auf den 1903/1903 Mark I.
129.9EUR4129,90 €
*
Lieferzeit ca. 14-21 Werktage. 4 Stk. im Lager USA
Eigenschaften:Color: BlackMarke: SpringfieldMaterial: AluminumModell: 03-A3Number of Bases: 1-PieceStyle: Weaver-Style Bases
Kein Bohren oder Tapen erforderlich – einfach zu installieren.
Passt gut zum originalen Finish des Springfield.
Verwendet Standard-Weaver-Stil 1" Ringe (nicht im Lieferumfang enthalten).
Eigenschaften
Color:
Black
Marke:
Springfield
Material:
Aluminum
Modell:
03-A3
Number of Bases:
1-Piece
Style:
Weaver-Style Bases
Versandgewicht: 0,136kgVersandhöhe: 25mmVersandbreite: 97mmVersandlänge: 173mm
Entdecke die No-Drill S&K Halterung für deinen 03A3 Springfield! 🛠️ Perfekte Passform und kein Bohren nötig. Hol sie dir jetzt!
No need to drill and tap a rock-hard Springfield with this No-Drill, No-Tap Mount. No need to bend the bolt, a simple grinding of the bolt handle for clearance is all that’s needed. Blends in well with original finish. Will not fit the 1903/1903 Mark I.
SPECS: Alum., black, anodized. Uses standard Weaver-style 1" (2.5cm) rings, not supplied. Wt. 3 oz. (85 g). 5-5⁄16" (13.5cm) long.
Mehr...
Kein Bohren und Gewindeschneiden an einem extrem harten Springfield notwendig mit dieser No-Drill, No-Tap Halterung. Es ist nicht nötig, den Bolzen zu biegen; eine einfache Bearbeitung des Bolzenhandgriffs für den nötigen Platz reicht aus. Passt gut zum ursprünglichen Finish. Passt nicht auf den 1903/1903 Mark I.
SPECS: Aluminium, schwarz, anodisiert. Verwendet Standard-Weaver-Stil 1" (2,5 cm) Ringe, nicht im Lieferumfang enthalten. Gewicht: 3 oz. (85 g). 5-5⁄16" (13,5 cm) lang.
Mehr...
Kundenbewertungen zu S&K 1903 A3 SPRINGFIELD DOVETAIL IN REAR (WEAVER)
Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 4,8
Nice product(22.11.2011)
This no gunsmithing mount works as advertised but you may have to do minor trimming of the handguard as it will be too long "IF" you use the handguard retaining ring. Stock will also have to be notched slightly if you use the handguard retaining ring as the mount slightly pushes it forward. I bought an extra handguard and saved my original. You can find them cheap online.
Easy to install, secure(10.07.2012)
Easy to install on my Springfield M1903-A3. Had to use a dremmel on my stock to make the ring around the barrel for the front mount to fit. It was a synthetic stock so it only took 30 minutes to make it a nice fit. Fits very tight and secure.
every install is different(25.03.2013)
had to cut top foreend piece shorter,then fiqure a way to secure it to stock from moving side to side.
update on first review(31.03.2013)
I ended up reuseing the stock ring.With a little extra thought,I cut the upper portion of the stock about a quarter of an inch shorter,and used a dremmel tool to fit.Great tool!I bought Accushot Premium 1-inch Weaver Style See-Thru Medium Profile Rings.The bolt handle clears the scope by 3/16 inch.I installed a Tasco Varmint 2.5-10x 42mm True Mil-Dot Reticle,1/4 MOA Turrets Riflescope.Looks great.
Ease of installation(02.11.2013)
Mounted easy, great design! Brownell your the greatest too. Ordered this product at 3:00 on the 28th of Oct. Received it the 30th. Thanks for a great transaction!!!!!!!!!!!!!!!!!!!
s&k 03a3 mount(11.04.2015)
This is great product easy to install looks good on the rifle