The Strike Iron Sights (Suppressor Height) give you an elevated sight picture for a red dot or suppressor pistol setup. The front and rear sights sit at an absolute co-witness position with a slide mounted red dot. Designed to help with proper sight alignment and keep the shooter's eyes focused, there is natural light that is seen on both sides of the front sight between the u-notch rear sight. Steps placed in the rear of both sights help angle and reduce unwanted glares or reflections out of your eyes. Lines and angles designed to use natural light reflections and shadow play to keep user's eye aligned and focused on the target. The rear sight is designed with a negative angle so that the shooter will see the back wall as dark as possible to give total focus on the sights. The line running down the middle of the rear sight is there to catch light from above and create a ""line"" illusion in which the shooter can use it to assist in aiming. The front sight can be painted to user’s color preference or use glow-in-the-dark pain to customize the look and use of the sights. Made from SUS630 hardened stainless steel, the Strike Iron Sights For (Suppressor Height) is engineered to be as robust as possible while giving you one of the most budget friendly options on the market. The Strike Iron Sights (Standard Height) give you the best affordable option so you can throw away those plastic or boring OEM steel sights. Designed to help with proper sight alignment and keep the shooter's eyes focused, there is natural light that is seen on both sides of the front sight between the u-notch rear sight. Steps placed in the rear of both sights help angle and reduce unwanted glares or reflections out of your eyes. Lines and angles designed to use natural light reflections and shadow play to keep user's eye aligned and focused on the target. The rear sight is designed with a negative angle so that the shooter will see the back wall as dark as possible to give total focus on the sights. The line running down the middle of the rear sight is there to catch light from above and create a ""line"" illusion in which the shooter can use it to assist in aiming. The front sight can be painted to user’s color preference or use glow-in-the-dark pain to customize the look and use of the sights. Made from SUS630 hardened stainless steel, the Strike Iron Sights (Standard Height) is engineered to be as robust as possible while giving you one of the most budget friendly options on the market.
Die Strike Iron Sights (Suppressor Height) bieten dir ein erhöhtes Sichtbild für eine Rotpunkt- oder Suppressor-Pistolenanordnung. Die Vorder- und Rücksichten befinden sich in einer absoluten Co-Witness-Position mit einem auf dem Schlitten montierten Rotpunkt. Sie sind so gestaltet, dass sie dir bei der richtigen Ausrichtung der Visierung helfen und die Augen des Schützen fokussiert halten. Es gibt natürliches Licht, das auf beiden Seiten der Vorderansicht zwischen der U-Notch-Rückansicht sichtbar ist. Stufen, die sich im hinteren Bereich beider Sichten befinden, helfen, den Winkel zu verändern und unerwünschte Blendungen oder Reflexionen aus deinen Augen zu reduzieren. Linien und Winkel sind so gestaltet, dass sie natürliche Lichtreflexionen und Schattenspiele nutzen, um das Auge des Benutzers auf das Ziel auszurichten und zu fokussieren. Die Rückansicht ist mit einem negativen Winkel gestaltet, sodass der Schütze die Rückwand so dunkel wie möglich sieht, um die volle Konzentration auf die Sights zu ermöglichen. Die Linie, die in der Mitte der Rückansicht verläuft, fängt Licht von oben ein und erzeugt eine ""Linien""-Illusion, die der Schütze zur Unterstützung beim Zielen nutzen kann. Die Vorderansicht kann nach den Farbvorlieben des Benutzers lackiert oder mit Leuchtfarbe angepasst werden, um das Aussehen und die Nutzung der Sights zu individualisieren. Hergestellt aus SUS630 gehärtetem Edelstahl, sind die Strike Iron Sights (Suppressor Height) so konstruiert, dass sie so robust wie möglich sind und dir eine der budgetfreundlichsten Optionen auf dem Markt bieten. Die Strike Iron Sights (Standard Height) bieten dir die beste erschwingliche Option, damit du die langweiligen Kunststoff- oder OEM-Stahlsights entsorgen kannst. Sie sind so gestaltet, dass sie dir bei der richtigen Ausrichtung der Visierung helfen und die Augen des Schützen fokussiert halten. Es gibt natürliches Licht, das auf beiden Seiten der Vorderansicht zwischen der U-Notch-Rückansicht sichtbar ist. Stufen, die sich im hinteren Bereich beider Sichten befinden, helfen, den Winkel zu verändern und unerwünschte Blendungen oder Reflexionen aus deinen Augen zu reduzieren. Linien und Winkel sind so gestaltet, dass sie natürliche Lichtreflexionen und Schattenspiele nutzen, um das Auge des Benutzers auf das Ziel auszurichten und zu fokussieren. Die Rückansicht ist mit einem negativen Winkel gestaltet, sodass der Schütze die Rückwand so dunkel wie möglich sieht, um die volle Konzentration auf die Sights zu ermöglichen. Die Linie, die in der Mitte der Rückansicht verläuft, fängt Licht von oben ein und erzeugt eine ""Linien""-Illusion, die der Schütze zur Unterstützung beim Zielen nutzen kann. Die Vorderansicht kann nach den Farbvorlieben des Benutzers lackiert oder mit Leuchtfarbe angepasst werden, um das Aussehen und die Nutzung der Sights zu individualisieren. Hergestellt aus SUS630 gehärtetem Edelstahl, sind die Strike Iron Sights (Standard Height) so konstruiert, dass sie so robust wie möglich sind und dir eine der budgetfreundlichsten Optionen auf dem Markt bieten.