90 degree standard throw lever 60 degree short throw lever Available in black Drop in replacement for Mil-Spec selector switch Fully ambidextrous Not recommended to be used with the Hipertouch trigger
90-Grad-Standard-Wurfhebel 60-Grad-Kurzwurfhebel Erhältlich in Schwarz Einfache Ersatzlösung für den Mil-Spec-Wahlschalter Vollständig beidhändig Nicht empfohlen für die Verwendung mit dem Hipertouch-Abzug
Eigenschaften
Waffentyp:AR-15
Versandgewicht:0,018kg
Versandhöhe:6mm
Versandbreite:83mm
Versandlänge:108mm
UPC:811452029309
Artikeldetails
US-Exportklassifizierung: 0A501.x
Kundenbewertungen
Kundenbewertungen (6)
3,5 / 5
Sehr empfehlenswert
Suprised! 13.12.2017
I did not actually read the product description nor reviews when i ordered it. I thought it was just a regular ambi safety with fancy arms. When i got it, i realized that it has 2 safety groove cut in it, 1 side is the regular 90 degree cut and the other side is 60 degree short throw cut. That is a bonus for me as i have both regular marked lowers and 60 degree sts marked lowers.
I did not experienced any fitment issue that other reviewers have. It fitted my Noveske, aero precision, armalite and spike tactical lowers. It is a tighter fit in my Noveske, which i believe has everything to do with the fact that Noveske cerakote and anodize all their lowers.
I will be buying a few more of these.
Wenig empfehlenswert
Maybe not. 04.06.2017
Safety was mot mil spec diameter. Would not fit at all in hole, when standard mil spec single selector safety dropped right in. Had to auger it into both holes so it milled out some of the aluminum lower receiver. Finally took an emery cloth to it and filed it down on both ends of the shaft. Put the lower together and it wouldn't go full 12 o'clock to release the trigger without using your thumb to give it that extra millimeter(s). Bad tetent channel maybe? Took it out and reversed it so it's now a short throw.... now it works, but a lot or work and not a cheap safety for the trouble it gave me.
Bedingt empfehlenswert
Didn't fit on two different rifles. 27.04.2017
This is my 3rd Seekins ambi safety and I've been pleased up to this point. The first two I purchased were installed on Palmetto State Armory lowers and they went in and function without issue. Based on those experiences I purchased a 3rd Seekins for use on a factory Daniel Defense rifle. The safety seems a bit overlarge in diameter as it was very tight when inserted in the first hole in the receiver, and could not be pushed all the way to the other side. I then tried to install the safety on a factory Armalite rifle, and again would not fit. Fortunately I had another rifle with a Palmetto receiver that had a CAA ambi safety installed. I removed the CAA and installed the Seekins in the Palmetto without difficulty. The CAA safety was then installed in the Armalite rifle without difficulty. I could have done a bit of careful fitting and probably gotten the Seekins to fit in the Armalite and Daniel Defense but I don't really want to be sanding on an anodized part.
Sehr empfehlenswert
Well made, easy install, good fit. 23.03.2017
Purchased two of these in black. Installed one in a Palmetto AR9 and the other in a Palmetto AR15. Both went in without difficulty, look good, and operate well. I shoot left-handed and this product makes manipulating the safety much easier.
Sehr empfehlenswert
Great product 29.03.2016
Super easy to install, especially liked the way you can switch the controls to be 60 or 90 degrees just by turning over the base. Way better pricing than other versions on the market.
Nicht empfehlenswert
Loose fit 11.03.2016
There is a 3/32" gap between the receiver and the safety lever on each side of the receiver. Almost slips over the stops on the receiver. Also, the anodizing on one of the levers is purple instead of black. I will be returning this. This is the first Seekins product I have ever had an issue with.
Brownells Austria GmbH
Hauptstraße 13-15
2332 Hennersdorf
Österreich
info@brownells.at
Zuletzt gesehen
Ups! Da ist etwas schiefgelaufen.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.
Entdecke das ambidextrous SAFETY SELECTOR KIT in Schwarz! 🔧 Einfacher Austausch und perfekte Passform für deinen AR-15. Jetzt ausprobieren!
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Die AR-15 ATLAS S-ONE Slim Line Handguards sind aus leichtem 6061-T6 Aluminium gefertigt und bieten Stärke und Stabilität.
Das innovative Aero Taper Lock Attachment System (ATLAS) sorgt für eine einfache und sichere Montage.
Erhältlich in verschiedenen Längen und Farben, mit einer vorderen und hinteren Picatinny-Schiene für vielseitige Anwendungsoptionen.
Zwei Kappen pro Basis für doppelte Klemmkraft und gleichmäßigen Klemmdruck.
Aluminiumkonstruktion sorgt für minimales Gewicht.
Erhältlich in verschiedenen Oberflächen und Höhen für unterschiedliche Anwendungen.
Die 9mm Läufe von Faxon Firearms bestehen aus robustem 4150 GBQ Stahl.
Mit einem 1/10 Drall bieten sie Stabilität für alle Geschossgewichte.
Die Läufe sind mit einer QPQ Black Nitride oder FDE Beschichtung für erhöhte Korrosionsbeständigkeit ausgestattet.
Der Pistol Viper Bore Snake reinigt, schrubbt und schmiert in einem Schritt.
Er hat 50 % mehr Schrubfläche für gründlichere Reinigungsarbeiten.
Waschbar und wiederverwendbar mit einem praktischen Etui zur Aufbewahrung.
Die tuned Buffer Springs sorgen für einen sanfteren und leiseren Betrieb in AR-Pufferrohren.
Verbessertes Impulsgefühl führt zu schnellerer Zielerholung und besserer Zuverlässigkeit.
Kompatibel mit festen Schaftgewehren und Karabiner-Pufferrohren von AR10 und 308 AR.