Features: Precision cut and bent for the greatest consistency possible New proprietary material for improved spring tension Material and geometry allows for improved reset When used in conjunction with the Glockworx Spring Kit (100-004-108), a 3lb trigger will be possible while maintaining a crisp, positive reset
Specs: Fits all Glock but Models 42 or 43.
Eigenschaften: Präzise geschnitten und gebogen für die bestmögliche Konsistenz Neues proprietäres Material für verbesserte Federkraft Material und Geometrie ermöglichen einen verbesserten Reset Bei Verwendung in Verbindung mit dem Glockworx Federkit (100-004-108) ist ein 3lb Abzug möglich, während ein klarer, positiver Reset beibehalten wird.
Technische Daten: Passt auf alle Glock, außer den Modellen 42 oder 43.
Top Takeaways
Präzise geschnitten und gebogen für maximale Konsistenz.
Neues Material verbessert die Federkraft und ermöglicht einen klaren Reset.
Kompatibel mit allen Glock-Modellen, außer 42 und 43; 3lb Abzug möglich mit Glockworx Federkit.
Eigenschaften
Modell:Universal Handguns
Waffentyp:Glock
Versandgewicht:0,045kg
Versandbreite:51mm
Versandlänge:89mm
UPC:811338030917
Artikeldetails
US-Exportklassifizierung: 0A501.x
Kundenbewertungen
Kundenbewertungen (7)
3,6 / 5
Wenig empfehlenswert
CAUSED ACCIDENTAL DOUBLE FIRE 12.12.2017
This connector should be used along with the Zev trigger only and not the stock Glock trigger or another aftermarket trigger. With the stock Glock trigger it takes some poundage off of the trigger pull, but it takes away the crisp wall and makes the trigger pull very mushy without a clear break. When used with a Hyve trigger, it made my glock unintentionally fire immediately upon the resetting of the trigger. In other words, it made my gun fire once when I pulled the trigger, then a second time when I took my finger off the trigger. Although to some a double fire trigger may be considered a "happy mistake" it is not safe to use in my gun for concealed carry purposes. I uninstalled this connector and put back in the stock one for a more predictable, safe, and clean trigger pull.
Sehr empfehlenswert
Works as advertised. 12.06.2017
Picked this up for a G17. When reassembled correctly, it reduced my trigger to about 3.7lb which is close enough. So I have no issues with the connector.
I did however also get the ZEV spring kit and did not have as good of luck with that. I have a review of that too, but the short version is the trigger spring caused issues.
Nicht empfehlenswert
Zev Connector 05.06.2017
I installed this on my Glock 19 and the trigger broke very late and had a spongie feel. The weight didn't drop compared to the factory part. The point to where the trigger would break wasn't a solid wall. I even tried 2 other complete triggers and they didn't function at all. I was unable to get the pistol to fire. Im a firearms examiner for a major dept and armorer to several brands of firearms. Not recommended.
Empfehlenswert
Works Good 10.05.2016
This was quite the improvement over the stock connector. It eased the trigger press greatly and was very smooth in its function. It fit correctly and functioned flawlessly. I never oil the the connector and trigger bar as recommended by Glock, however I do lubricate this area will a small amount of fine graphite at each cleaning. Overall it is a good improvement for a small amount of money.
Bedingt empfehlenswert
Maybe, maybe not 13.05.2014
The trigger pull is great after installing this and a connector, but I have one problem. To describe it best, it's like the trigger safety gets "hung" on the Glock frame. I installed two on different Glocks and they both did it. I haven't gotten into a cure yet, but it will take one. I would not recommend this to someone who couldn't tweak it to get that out.
Sehr empfehlenswert
Excellent connector 24.01.2014
Best connector I've tried if wanting a lighter pull. High quality.
Sehr empfehlenswert
Light and silky smooth 10.12.2013
Great product. Lighter and smoother than either the factory part or the Lone Wolf 3.5 lb connector. No gritty feel, no drag. I also bought the Ghost Ultimate, but haven't had a chance to try it yet. It might be as good as the Glockworx, but I don't see how it could be better. Combined with the Glockworx Competition Spring Kit you've got a pretty sweet trigger at a very reasonable cost.
Brownells Austria GmbH
Hauptstraße 13-15
2332 Hennersdorf
Österreich
info@brownells.at
Zuletzt gesehen
Ups! Da ist etwas schiefgelaufen.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.
Verbessere deinen Glock® mit dem ZEV Technologies PRO Connector! 🚀 Besserer Reset und 3lb Abzug für präzise Schüsse.
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Die Drop-in Teile verbessern deinen Glock® Abzug mit sanfterem, präziserem und leichterem Gefühl.
Die Abzugsfeder hat fast 30% mehr Kraft als die Werksfeder und reduziert den Abzugsdruck um bis zu 1 lb.
Das Competition Spring Kit sorgt für schnellere Nachfolgeschüsse und verbesserte Zündsicherheit.
Enthält alle notwendigen Federn zur Anpassung des Abzugsgewichts für sportliches Schießen und Selbstverteidigung.
Funktionen: 4 Lb und 6 Lb Schlagbolzenfedern sowie reduzierte Sicherheitsplungerfeder und 6 Lb Abzugfeder.
Hergestellt aus hochwertigem Klavierdrahtstahl für maximale Lebensdauer.
Der EDGE 3.5 beseitigt Widerstand oder "Glitch" beim Abzug.
Er bietet die gleichen selbstreinigenden Eigenschaften wie andere Connectoren.
Kompatibel mit Gen 1 - 5 Glocks, ausgenommen Modelle 42, 43, 43X und 48.
Der verlängerte Schiebesicherunghebel erleichtert das Auseinandernehmen deiner Glock® mit öligen oder verschwitzten Fingern.
Einfacher Austausch: 3mm länger als das originale Teil für besseren Grip und schnelles Abnehmen des Schlittens.
Keine dauerhaften Veränderungen an der Waffe, passt weiterhin in alle Standardholster.
Der GRIP FRAME INSERT schließt die Öffnung in Glock®-Pistolen und sorgt für ein sauberes, glattes Aussehen.
Er passt zu den Glock® Modellen 17 bis 25, 31, 32, 34, 35, 37 und 38 sowie zu Gen 4 Modellen.
Der Einsatz hält Schmutz und Ablagerungen fern und nutzt das Lanyard-Loch zur Sicherung.