Machined from a solid aluminum billet, charging handle drops in to standard AR-15/M16 uppers to offer exceptional strength and extremely consistent tolerances. Hardcoat anodized to resist wear and corrosion.
Aus einem massiven Aluminium-Billet gefräst, lässt sich der Charging Handle in Standard-AR-15/M16 Oberteile einsetzen und bietet außergewöhnliche Stärke sowie äußerst konsistente Toleranzen. Harteloxiert, um Abnutzung und Korrosion zu widerstehen.
SPECS: Aus gefrästem Billet aus 6061 T6 Aluminium, harteloxiert in matt schwarz. 6 7/8"(17,5cm) lang. V1 Riegel .56" (1,4cm) lang.
Eigenschaften
Hand:Right
Oberfläche:Black
Waffentyp:AR-15
Versandgewicht:0,045kg
Versandhöhe:13mm
Versandbreite:76mm
Versandlänge:218mm
UPC:608938410832
Artikeldetails
US-Exportklassifizierung: 0A501.x
Kundenbewertungen
Kundenbewertungen (7)
2,9 / 5
Sehr empfehlenswert
I have purchased several quality product 19.11.2016
Sehr empfehlenswert
Good quality changing handle for the mon 03.11.2016
I noticed an old negative review on this product. I have used Core changing handles for quite a while on my custom builds. Good product no problems. Their extended model is a good value and I am purchasing a few more.
Nicht empfehlenswert
Core Billet Charging Handle 02.07.2015
This is by far the worst changing handle I have ever purchased. I will return for a full refund the quality is just not there. The charging handle was poorly machined rough and as sharp as you can get.
Nicht empfehlenswert
Rough 21.04.2014
The anodized finish is rough. The latch has a sharp edge that does not easily engage the upper. The latch spring is stronger than it needs to be. The latch does not easily disengage when pulling the charging handle back. I returned this charging handle.
Nicht empfehlenswert
Not Within Specs 23.02.2014
This charging handle is not in specs. Installed the part and it drags and snags in a few places. Pulled the charging handle to the rear maybe 10 times and the aluminum is already showing through on top of the charging handle as well as underneath to the read of the charging handle. I tried two other charging handles including a stock one that came with another AR and a BCM Gunfighter and neither had any problems in the upper.
Sehr empfehlenswert
Good Quality Charging Handle 16.12.2013
Fits Perfecly In My Delton Receiver..Good Quality And The Finish Is Perfect..Best Of All Made In The USA...
Wenig empfehlenswert
Didn't fit 16.11.2013
The product quality and finish looked fine. However, the charging handle didn't fit in 2 out my 3 uppers. I bought it for use in a Stag Lefty upper as part of a build I'm doing for my wife. It didn't fit in there, so I tried swapping it out with one from my 20" Del Ton, where it also did not fit. I ended up swapping the charging handle from my LWRC M6A2, and it seems to work in there. Other than the fit issues, the handle appears to be well made. It didn't appear bent or otherwise compromised. I don't know if the bolt key channels in those particular uppers are a bit tight or what, but I made it work by shifting parts around, though I would have preferred to keep parts where they were, because I know they worked the way they were. I doubt this charging handle will compromise the reliabilty of the LWRC, but if it does, I'll use it to weigh my garbage can down.
Brownells Austria GmbH
Hauptstraße 13-15
2332 Hennersdorf
Österreich
info@brownells.at
Zuletzt gesehen
Ups! Da ist etwas schiefgelaufen.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.
Entdecke den AR-15/M16 BILLET Charging Handle von CORE RIFLE SYSTEMS! 💪 Aus robustem Aluminium für maximale Stärke und perfekte Toleranzen.
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Das CMMG Forward Assist Kit enthält alles, was du für dein AR-15 Oberteil benötigst.
Das Kit beinhaltet die Forward Assist Baugruppe, die Feder und den Installationsstift.
Einfaches und schnelles Upgrade für dein AR-15, auch wenn du ein entblößtes Oberteil hast.
Die Brownells M-LOK AR-15 Handguards bieten eine Vielzahl von Funktionen zu einem erschwinglichen Preis.
Ein Ausrichtungswerkzeug ist im Lieferumfang enthalten, um eine genaue Installation der Picatinny-Zubehörschiene zu gewährleisten.
Der Handguard ist aus Aluminium gefertigt, hat einen Innendurchmesser von 1,25 Zoll und ist vollständig schwarz beschichtet.
Das CARBINE H2 HEAVY BUFFER wiegt 4,6 oz und enthält zwei Wolframgewichte sowie ein Stahlgewicht.
Das erhöhte Gewicht sorgt für eine zuverlässigere Funktion in Gewehren mit kürzeren Gassystemen und reduziert Bolt Bounce.
Durch das Gewicht wird der Rückstoß gedämpft und die Verweildauer verlängert, was den Zyklus des Gewehrs verlangsamt.
Der Magpul MOE Karabiner-Schaft bietet eine robuste Konstruktion und ergonomische Vorteile für besseren Komfort und Unterstützung.
Er ist kompatibel mit Mil-Spec 1.14" O.D. Pufferrohren und ermöglicht schnelle Längenverstellungen.
Die weiche, synthetische Gummibuttpad verhindert das Verrutschen und erhöht den Komfort während der Nutzung.