The Rubber City Armory Adjustable Gas Key enhances performance of low mass and standard mass GI systems without unnecessary disassembly. Gas flow is adjusted and maintained at the carrier with 2 set screws, one to adjust gas flow and one to lock it in place. Made from Pre-Hardened 4140: 28-32RC with radiused corners reducing sharp edges. 2 mounting bolts included.
SPECS: Made from Pre-Hardened 4140: 28-32RC.
Der verstellbare Gas-Key von Rubber City Armory verbessert die Leistung von Low Mass und Standard Mass GI-Systemen, ohne dass eine unnötige Demontage erforderlich ist. Der Gasfluss wird am Träger mit 2 Set-Schrauben angepasst und gehalten, eine zur Anpassung des Gasflusses und eine, um ihn an Ort und Stelle zu sichern. Hergestellt aus vorgehärtetem 4140: 28-32RC mit abgerundeten Ecken, die scharfe Kanten reduzieren. 2 Montageschrauben sind im Lieferumfang enthalten.
SPECS: Hergestellt aus vorgehärtetem 4140: 28-32RC.
Top Takeaways
Der einstellbare Gas Key verbessert die Leistung von Low Mass und Standard Mass GI-Systemen.
Gasfluss kann einfach mit 2 Set-Schrauben am Träger angepasst werden.
Hergestellt aus vorkonserviertem 4140: 28-32RC mit abgerundeten Ecken für mehr Sicherheit.
Eigenschaften
Waffentyp:AR-15
Versandgewicht:0,009kg
Versandhöhe:16mm
Versandbreite:57mm
Versandlänge:102mm
Artikeldetails
US-Exportklassifizierung: 0A501.x
Kundenbewertungen
Kundenbewertungen (3)
4,3 / 5
Sehr empfehlenswert
Excellent Product 31.07.2015
I ordered this product for my suppressed 16" 300blk. The first time I ordered the product, it arrived with the bag cut (where the parts are) and a small piece of tape to cover it. I was missing one mounting bolt and all of the set screws. I returned it (Brownells made it right in a hurry) and received the replacement. This one had all of the pieces. The finish of the part is done well and is smooth to the touch. There aren't any instructions on how to install it but it is pretty straightforward. I thoroughly degreased the parts and placed a thin layer of red Loctite around the gas port and set the key in place. I also used a small amount of red Loctite on the mounting screws and torqued them to 58 in/lbs. I then put a quick shot of air through the key to make sure the hole was clear and let it set up for 24 hours. I did not stake it, as I was not sure if I was going to like it.
After the Loctite was good and set up, I took the gun out to the range to see how it worked. I am shooting 110gr Varmageddons with 19.5gr of W296, at about 2400 ft/s (Carbine gas) and an AAC Cyclone suppressor. I started with the set screw all the way in the closed position and placed one round in the magazine and fired. To my surprise the case was ejected at about 3-4 o'clock and about 5 feet away. The bolt did not lock back. I tried this several more times with the same result so it doesn't appear that one would be able to shut the gas all the way with a supersonic load. Recoil was drastically reduced from how the gun ran previous, which would slam the bolt back hard and throw brass directly behind me and over 20 feet away.
I backed out the adjustment screw 1/2 a turn and repeated. Same ejection and recoil, no bolt lock back. Another 1/2 turn, and the bolt locked back. I backed the screw out another 1/4 turn and put the locking screw in on top of it (no Loctite). I then fired the weapon approximately 30 times and checked the set screws. There was 0 movement but time will tell whether I will need to put some blue Loctite on or not.
Overall this is a good product. It is easy to adjust and comes with one extra set screw and one adjustment wrench. It does come with a little Rubber City Armory logo decal. It is very cheap looking but that is not really a big deal.
Now some may be concerned with where the gas goes. It goes in the receiver as my gun was a little dirtier than normal after the small amount of firing that I did. This did not affect how the rifle ran, as I had no malfunctions. Now I will go ahead and get those screws staked in.
Bedingt empfehlenswert
Great Idea. 09.04.2015
Gas control screws had to be reset repeatedly.
Even with the set screw there were problems keeping it where I wanted it. Once it was adjusted the adjustment changed when you tightened the locking screw.
Sehr empfehlenswert
seems to work as intended.... 03.04.2015
I was skeptical about this but wanted to give it a try...overall I'm impressed. My pinned carbine's barrel came with an oversized gas port it seems and I was having all the signs of over gassing(case head swipe, 12-1PM ejection, harsher recoil, mid case dents, etc) on every type of ammo I tried. Installed the ADIGS and now I have no swiping, dents, recoil is softer and ejection is consistently at 4PM with all ammo I've tried. I am writing this after about 1000 rounds through it because I wanted to give an accurate review and see how it did, I really liked it! I have only adjusted it once and hasn't moved in the last 1k rounds. This is a good option for those with a pinned/welded barrel.
Brownells Austria GmbH
Hauptstraße 13-15
2332 Hennersdorf
Österreich
info@brownells.at
Zuletzt gesehen
Ups! Da ist etwas schiefgelaufen.
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.
Verbessere die Leistung deines AR-15 mit dem verstellbaren Gas Key von Rubber City Armory! 🔧 Einfache Installation, optimale Anpassung.
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Die TekMat Ultra 20 Pistol Cleaning Mat ist wasserdicht, kratzfest und waschbar.
Sie enthält Diagramme und eine Teileliste, die dir hilft, deine Waffe einfach zu zerlegen und wieder zusammenzubauen.
Die Matten sind für verschiedene Modelle wie 1911, Beretta 92 und Glock Gen 4 erhältlich.
Der Type 23 P-Grip ist ein einfaches Upgrade für den Standard-AR15-Pistolengriff.
Er bietet einen erhöhten vertikalen Griffwinkel und einen verlängerten Tang für bessere Ergonomie.
Hergestellt aus strapazierfähigen Verbundmaterialien, ist er ideal für eine korrekte Abzugsposition.
Fügt eine Mil-Spec-Schienenabschnitt an der Rückseite der CZ Scorpion hinzu.
Hergestellt aus 6061 Aluminium mit hart eloxierter Beschichtung.
Verfügt über eine ANTI-ROTATION QD Sling Swivel Buchse.
Füge die Vielseitigkeit einer einteiligen Picatinny-Scopeschiene zu deinem Gewehr hinzu, ohne Bohren oder Gewindeschneiden.
Präzisionsbearbeitet aus ultra-steifem, extrudiertem 6061 T6 Aluminium, geeignet für Picatinny- oder Weaver-Zielfernrohr-Ringe.
Enthält Innensechskantschrauben und einen Schlüssel; EGW empfiehlt ein Drehmoment von 20 Zoll-Pfund und einen Tropfen blauen Loctite zur Montage.
Die R22.5 Offset Rail bietet eine versetzte Position für Lichter, Laser oder Kimme und Korn.
Sie besteht aus leichtem, robustem 6061 Aluminium und ist hart eloxiert für eine lange Lebensdauer.
Die hochwertige MIL-STD 1913 Schiene wird zu 100 % in den USA hergestellt und kommt mit einer lebenslangen Garantie.