(0) 
Newsletter
Just a better spring 29.11.2014
I don't have much more to say from the review by "Mark of La Mancha" but I will add this. When installing these springs and closely compare them to any factory springs like them (I've compared them to Bravo Company, Bushmaster, JP, and Rock River Arms) and you'll notice the differences that set these apart. The cut at the ends of the CS wire versus a angle grinding job on military spec springs, the coating, and so on.
I've installed ten sets of these and while somewhat tricky to do with only two hands they are well worth it and a vast improvement on reliability and knowing that you will have excellent lifetime out of the springs without degradation of their strength.
Great Springs 10.03.2014
Design: Simple design, no inserts are needed. Worked perfect out of the box. I don't recall there being installation instructions in the small zip baggie these arrived in. If you cannot find this information on the Interwebs though, you probably shouldn't be messing around with firearms.
Construction: The CS coating on these springs is far more reliable and durable than the plain steel used in standard springs; CS gives these springs a higher tolerance to heat, and many more cycles before deformation of the spring occurs. Also, there are no bits of rubber or O-rings to get damaged, lost, or installed incorrectly. No: "do I need green or black?" questions with this set.
Function: These springs are top notch quality and function great. Over thousands of rounds I have had no F2F or extraction issues. High quality ammunition and proper maintenance aids in this as well.
Cost: On Brownells, a standard set of extractor/ejector springs (plain steel) will run you about $2.25 all the way to around $8 for brand name springs with inserts and O-Rings. For a few bucks over that, you get a system that is simplified, reliable, consistent, and well⦠superior. It was a no-brainer for me.
Installation: I'm including this section for information purposes only; I can't add or remove stars based on this because the install is governed by the design of the AR-15, not of this product. Installing these springs can be done without any special tools or experience. I found it to be one of the more difficult AR-15 construction procedures however, simply because the disassembly/reassembly of the bolt requires some physical strength and the ability to carefully align very small holes while holding them with your three hands. If you have trouble installing these or do not have three hands, a tool is available â it is certainly not required however, as I did my install with two hands, a hand clamp and socket from a socket wrench â YouTube it. If I were doing more of these installs I would purchase the tool for convenience alone (Sinclair AR-15 Bolt Vise: 749-003-708WS.)
Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.
bei Brownells Austria, deinem Partner für alles rund um Waffen. Wir haben nicht nur eine echte Leidenschaft für das Thema, sondern auch eine unerreichte Auswahl an Waffenteilen, Waffenzubehör, Werkzeugen für Büchsenmacher, Zielfernrohren und Rotpunktvisieren sowie Expertenwissen rund um Schusswaffen und Wiederladen.
Ob es um Waffen-Instandhaltung, -Reparatur oder -Tuning geht - wir haben, was du suchst!
Für Schützen, von Schützen
Wir teilen deinen Enthusiasmus und wissen genau, wonach du suchst, denn wir sind Teil der Gemeinschaft.
Riesige Auswahl
Vom Wesentlichen bis zum Einzigartigen findest du bei uns alles unter einem Dach.
Unsere Mischung aus Tradition und Innovation
Du kannst bei uns shoppen mit dem Komfort moderner Technologie, unterstützt von unserer langjährigen Erfahrung.
Stöbere in unserer Auswahl und entdecke, warum wir der vertrauenswürdige Name im Bereich Schießsport und Jagd sind.
© 2025 Brownells Österreich
Part of the Brownells Europe Group
Klassische Ansicht
Mobile Ansicht
Hilfe und Kontakt
