Extra-thin to reduce bulk for concealed carry and give shooters with small hands a better hold. Available with Double Diamond checkered to fit 1911 Auto and Officers ACP. All require slim bushings and screws, available separately. Mahogany is deep reddish/brown color of varying intensity.
SPECS: Approximately .165" (4.2mm) thick. Mahogany is genuine Philippine mahogany.
Mehr...
Reduziert Volumen, Einfach zu Greifen
Extra-dünn, um das Volumen für verdecktes Tragen zu reduzieren und Schützen mit kleinen Händen einen besseren Halt zu geben. Verfügbar mit Double Diamond-Riffelung, passend für 1911 Auto und Officers ACP. Alle benötigen schlanke Buchsen und Schrauben, die separat erhältlich sind. Mahagoni hat eine tiefrote/braune Farbe von variierender Intensität.
Kundenbewertungen zu NAVIDREX MAHOGANY GOVT. DOUBLE DIAMOND SLIM GRIPS
Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 3,9
Great Product!(12.08.2009)
Easliy installed with the bushings and screws I ordered at the same time. The 1911 isn't bulky, but these are amazing in the way that they improve the feel of the pistol. I know the trendy thing these days is for aluminum or composites, and these are supposed to improve your purchase of the weapon. I cannot stand the feel of those things. These are traditional, nicely grained, checkered wood, the checkering is sharp, crisp, and easy on the hand. They aren't ostentatious, they don't have fancy designs, etc. If you want "pretty" grips like that, look somewhere else. If you want something that WORKS, and works WELL, then you want this.
Worked well, inexpensive(26.04.2010)
Perfect fit on my 1911. I added a Pearce grip enhancement underneath and the fit is dead on with my short fingers. Very positive control. You need the slim bushings for the panels and standard length screws with the addition of the Pearce grip. My grip screws are allen heads and I sanded the heads down just a tad for a more flush fit. The sanding was not needed,just my personel preferance. No thread protrusion into the mag well at all.
Not too bad(17.08.2010)
I wanted to try a set of slim grips but didn't want to break the bank on something I was unsure of. That being said, these are inexpensive and not too bad. This was not quite a drop in replacement. The set of grips I received seemed like they were unfinished and very light in color. The checkering wasn't as deep as the set they are replacing either. The cut out for the mag release was a tad bit too high. And they were also too tall on the plunger side pushing up against the plunger and not lining up. This all wasn't too big a deal for me. A little sanding and some finish and these turned out looking good. They also feel good too. Don't forget the slim bushing and grip screws.
Needed some work(19.08.2010)
The grips I received looked like the were unfinished. They were very light in color and the edges were "furry" and needed to be sanded. The left grip was too tall and was pushing against the plunger tube and did not line up with the bushings. The right side had the mag release notch cut too high. That being said, I sanded them to fit and cleaned them up, and finished them with tung oil. They now look and feel good. All in all, they are worth the price. Don't forget the slim bushing and screws.
Good Value(14.03.2011)
These grips were very well matched and the fit was good, too. The slim contour really helps, especially with my short fingers. While they appeared to be "unfinished," the quality and grain of the wood looked great. After just a little "de-whiskering" and a traditional and easy linseed finish, they looked three times their price! These were well worth their modest cost.
Okay but not stellar.(28.07.2011)
I don't really have much more to add to what has already been said. The wood is Philippine Mahogany, which I discovered AFTER-the-fact isn't really mahogany at all, but some kind of cheap jungle plant (lauan). Actually I shouldn't say "cheap"; apparently it has some good qualities, but it is NOT mahogany by any stretch of the imagination. Its main use is to make plywood.
The wood came unfinished. I rubbed in several layers of boiled linseed oil, which was an improvement.
The color of the wood is really light. Again, the linseed oil helped darken it a little, but it's still much lighter than I would have preferred. I'm hoping the wood will darken with age/use, and I plan to continue applying linseed oil during regular cleanings. I may end up just staining them if I don't see an improvement.
As someone else mentioned, the checkering is rather shallow. In spite of that, I think it functions okay.
On the plus side, the grips dropped right in without any additional fitting required (don't forget to order slim grip screws & bushings, too). I didn't need to sand mine to remove "fuzz", either.
I used a calipers to measure the difference in width between these slim grips and the originals; unfortunately, I didn't write down the measurements (my bad). IIRC, there was about a 0.15" difference in width; call it an eighth (but take that with a grain of salt since I'm quoting from memory).
My number 1 reason for buying these grips was price. I'm not disappointed in that regard, but let's face it... the time out of my schedule to finish the wood, the lower quality wood, etc is a trade-off, so the true "value" of the grips is in question (IMO). Nevertheless, if you're like me and don't feel like spending an arm and a leg to "try" a set of slim grips, then these will certainly fill the bill.
These grips aren't going to "wow" you out-of-the-box, but they've met my needs.
double diamond slims(03.02.2013)
reading the other reviews i knew to expect an "unfinished" product. i figured id have to stain them to get the red color i wanted. but out of the package they were red enough for me and just need some kind of oil or "sealing" of the wood to preserve them. i did 2 coats of toms 1/3 gun wax on them and they look great! fit nice too. with the hardware it was under 40.00 very much thinner than my stock rock island grips. much better grip on the gun now.
Poor quality grips, not worth the money(05.12.2013)
Like most of the reviewers here, I purchased these grips due to the low price. However, I should have read the reviews more in depth instead of trusting the aggregate star rating from Brownells. The grips that I received were definitely in unfinished condition.
While I had originally considered returning the grips to Brownells, I figured I'd try to put some work into them to see if they could be salvaged. There was quite a bit of "fuzz" still left on the grips from the checkering process that I had to remove using sandpaper. As the "mahogany" was quite light in color, I decided to stain the grips with Minwax Red Mahogany Stain. However, as Bullwinkle stated in his review, these grips are not real Mahogany but Philippine lauan wood. As you can see from the attached picture, the grips do not stain well at all. The grain profile of the wood results in a very uneven stain pattern.
While the low price is attractive, I feel that you're better off purchasing an alternative product that is in finished form. I'm disappointed that Brownells would carry such a low quality product as everything else I have purchased here has been top of the line.
NICE STRONG GRIPS(24.03.2012)
Perfect fit and strong!!!! Slim and feel great!!
Outstanding stocks(05.12.2011)
I have Navidrex slimline stocks on all of my serious use 1911s. Love them.
The fit and finish on them is excellent, and they are impervious to just about everything.
Artikel-Nr.: 647000018 NAVIDREX MAHOGANY GOVT. DOUBLE DIAMOND SLIM GRIPS Herstellerproduktnummer: NONE Extra-dünn, um das Volumen für verdecktes Tragen zu reduzieren und Schützen mit kleinen Händen einen besseren Halt zu geben. Verfügbar mit Double Diamond-Riffelung, passend für 1911 Auto und Officers ACP. Alle benötigen schlanke Buchsen und Schrauben, die separat erhältlich sind. Mahagoni hat eine tiefrote/braune Farbe von variierender Intensität.
43.9EUR043,90 €
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Extra-dünne Griffe, ideal für verdecktes Tragen und kleine Hände.
Verfügbar mit Double Diamond Riffelung, passend für 1911 Auto und Officers ACP.
Echtes philippinisches Mahagoni mit einer tiefroten/braunen Farbe.
Eigenschaften
Ambidextrous Safety Cut:
No
Color:
Brown
Marke:
1911
Material:
Wood
Modell:
Commander,Government
Style:
Traditional
Surface:
Checkered
Versandgewicht: 0,005kgVersandhöhe: 5mmVersandbreite: 86mmVersandlänge: 135mm
Artikeldetails
US-Exportklassifizierung: 0A501.y.1
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschließlich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Entdecke die 1911 SLIM GRIPS aus Mahagoni 🌳 für besseren Halt und verdecktes Tragen. Ideal für 1911 Auto und Officers ACP!
Extra-thin to reduce bulk for concealed carry and give shooters with small hands a better hold. Available with Double Diamond checkered to fit 1911 Auto and Officers ACP. All require slim bushings and screws, available separately. Mahogany is deep reddish/brown color of varying intensity.
SPECS: Approximately .165" (4.2mm) thick. Mahogany is genuine Philippine mahogany.
Mehr...
Reduziert Volumen, Einfach zu Greifen
Extra-dünn, um das Volumen für verdecktes Tragen zu reduzieren und Schützen mit kleinen Händen einen besseren Halt zu geben. Verfügbar mit Double Diamond-Riffelung, passend für 1911 Auto und Officers ACP. Alle benötigen schlanke Buchsen und Schrauben, die separat erhältlich sind. Mahagoni hat eine tiefrote/braune Farbe von variierender Intensität.
Kundenbewertungen zu NAVIDREX MAHOGANY GOVT. DOUBLE DIAMOND SLIM GRIPS
Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 3,9
Great Product!(12.08.2009)
Easliy installed with the bushings and screws I ordered at the same time. The 1911 isn't bulky, but these are amazing in the way that they improve the feel of the pistol. I know the trendy thing these days is for aluminum or composites, and these are supposed to improve your purchase of the weapon. I cannot stand the feel of those things. These are traditional, nicely grained, checkered wood, the checkering is sharp, crisp, and easy on the hand. They aren't ostentatious, they don't have fancy designs, etc. If you want "pretty" grips like that, look somewhere else. If you want something that WORKS, and works WELL, then you want this.
Worked well, inexpensive(26.04.2010)
Perfect fit on my 1911. I added a Pearce grip enhancement underneath and the fit is dead on with my short fingers. Very positive control. You need the slim bushings for the panels and standard length screws with the addition of the Pearce grip. My grip screws are allen heads and I sanded the heads down just a tad for a more flush fit. The sanding was not needed,just my personel preferance. No thread protrusion into the mag well at all.
Not too bad(17.08.2010)
I wanted to try a set of slim grips but didn't want to break the bank on something I was unsure of. That being said, these are inexpensive and not too bad. This was not quite a drop in replacement. The set of grips I received seemed like they were unfinished and very light in color. The checkering wasn't as deep as the set they are replacing either. The cut out for the mag release was a tad bit too high. And they were also too tall on the plunger side pushing up against the plunger and not lining up. This all wasn't too big a deal for me. A little sanding and some finish and these turned out looking good. They also feel good too. Don't forget the slim bushing and grip screws.
Needed some work(19.08.2010)
The grips I received looked like the were unfinished. They were very light in color and the edges were "furry" and needed to be sanded. The left grip was too tall and was pushing against the plunger tube and did not line up with the bushings. The right side had the mag release notch cut too high. That being said, I sanded them to fit and cleaned them up, and finished them with tung oil. They now look and feel good. All in all, they are worth the price. Don't forget the slim bushing and screws.
Good Value(14.03.2011)
These grips were very well matched and the fit was good, too. The slim contour really helps, especially with my short fingers. While they appeared to be "unfinished," the quality and grain of the wood looked great. After just a little "de-whiskering" and a traditional and easy linseed finish, they looked three times their price! These were well worth their modest cost.
Okay but not stellar.(28.07.2011)
I don't really have much more to add to what has already been said. The wood is Philippine Mahogany, which I discovered AFTER-the-fact isn't really mahogany at all, but some kind of cheap jungle plant (lauan). Actually I shouldn't say "cheap"; apparently it has some good qualities, but it is NOT mahogany by any stretch of the imagination. Its main use is to make plywood.
The wood came unfinished. I rubbed in several layers of boiled linseed oil, which was an improvement.
The color of the wood is really light. Again, the linseed oil helped darken it a little, but it's still much lighter than I would have preferred. I'm hoping the wood will darken with age/use, and I plan to continue applying linseed oil during regular cleanings. I may end up just staining them if I don't see an improvement.
As someone else mentioned, the checkering is rather shallow. In spite of that, I think it functions okay.
On the plus side, the grips dropped right in without any additional fitting required (don't forget to order slim grip screws & bushings, too). I didn't need to sand mine to remove "fuzz", either.
I used a calipers to measure the difference in width between these slim grips and the originals; unfortunately, I didn't write down the measurements (my bad). IIRC, there was about a 0.15" difference in width; call it an eighth (but take that with a grain of salt since I'm quoting from memory).
My number 1 reason for buying these grips was price. I'm not disappointed in that regard, but let's face it... the time out of my schedule to finish the wood, the lower quality wood, etc is a trade-off, so the true "value" of the grips is in question (IMO). Nevertheless, if you're like me and don't feel like spending an arm and a leg to "try" a set of slim grips, then these will certainly fill the bill.
These grips aren't going to "wow" you out-of-the-box, but they've met my needs.
double diamond slims(03.02.2013)
reading the other reviews i knew to expect an "unfinished" product. i figured id have to stain them to get the red color i wanted. but out of the package they were red enough for me and just need some kind of oil or "sealing" of the wood to preserve them. i did 2 coats of toms 1/3 gun wax on them and they look great! fit nice too. with the hardware it was under 40.00 very much thinner than my stock rock island grips. much better grip on the gun now.
Poor quality grips, not worth the money(05.12.2013)
Like most of the reviewers here, I purchased these grips due to the low price. However, I should have read the reviews more in depth instead of trusting the aggregate star rating from Brownells. The grips that I received were definitely in unfinished condition.
While I had originally considered returning the grips to Brownells, I figured I'd try to put some work into them to see if they could be salvaged. There was quite a bit of "fuzz" still left on the grips from the checkering process that I had to remove using sandpaper. As the "mahogany" was quite light in color, I decided to stain the grips with Minwax Red Mahogany Stain. However, as Bullwinkle stated in his review, these grips are not real Mahogany but Philippine lauan wood. As you can see from the attached picture, the grips do not stain well at all. The grain profile of the wood results in a very uneven stain pattern.
While the low price is attractive, I feel that you're better off purchasing an alternative product that is in finished form. I'm disappointed that Brownells would carry such a low quality product as everything else I have purchased here has been top of the line.
NICE STRONG GRIPS(24.03.2012)
Perfect fit and strong!!!! Slim and feel great!!
Outstanding stocks(05.12.2011)
I have Navidrex slimline stocks on all of my serious use 1911s. Love them.
The fit and finish on them is excellent, and they are impervious to just about everything.
Hilfe und Kontakt
(0) 
Newsletter
Klassische Ansicht
Mobile Ansicht